Thread: The Six and a half Swede.

So by running my loaded rounds through the rifle prior to heading out can you enlighten me on how I'm all of a sudden going to get a jam?

Originally Posted by blip

So by running my loaded rounds through the rifle prior to heading out can you enlighten me on how I'm all of a sudden going to get a jam?

Think you guys are both correct, Andy's been caught out with ones that don't chamber.
Buy running all your loaded rounds through your gun your admitting neck sizing isn't perfect as you shouldn't have to do that.
If it works for you go hard

Originally Posted by blip

So by running my loaded rounds through the rifle prior to heading out can you enlighten me on how I'm all of a sudden going to get a jam?

It’s a hunting rifle
It’s not a clean environment
One bit of shit in the chamber or stuck to the round and the tight tolerances of a neck sized round will get ya

Originally Posted by rambo-6mmrem

It’s a hunting rifle
It’s not a clean environment
One bit of shit in the chamber or stuck to the round and the tight tolerances of a neck sized round will get ya

Crap, or enuff shit in the chamber will not differentiate between the two. If your cases had that much free play you’d be going through brass pronto.

Remember that a lot of reloaders use hand and C type presses that effectively only neck size and life goes on.


Sent from my iPhone using Tapatalk

Originally Posted by rambo-6mmrem

It’s a hunting rifle
It’s not a clean environment
One bit of shit in the chamber or stuck to the round and the tight tolerances of a neck sized round will get ya

I once tipped my rifle upwards and screwed on the suppressor, some chunks of carbon got loose and went back down the barrel... jammed up nicely with my stupidly precise ammo i had made.