Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator Alpine


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 25

Thread: T3/6.5/Amax

  1. #1
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477

    T3/6.5/Amax

    Is anybody using a T3 in 6.5x55 with 140gr Amax successfully.
    I have a mate coming this arvo with his new rifle for me to load . Am looking to shortcut the whole development process.
    I have 140Amax, adi 2209, 2208, 2206H and Viht N560 with Lapua brass.
    Thanks.

  2. #2
    Official Cheese Shaman Spanners's Avatar
    Join Date
    Dec 2011
    Location
    Chch
    Posts
    6,385
    Andyanimal is IIRC

    2209 and slower powderwise. 560 is around 09, maybe a smidge slower
    2213 would be a good powder also

  3. #3
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477
    Yes a guy at work is using 2213 with 129gr sst's and he's getting good results, unforunately I only have what I've listed so guess I'll start around 46gr of 2209 and 49grs of 560 and see what happens.

  4. #4
    Member crzyman's Avatar
    Join Date
    Dec 2011
    Location
    Alexandra
    Posts
    1,149
    N560 end of story, start at 49 or 50g.
    If its guns, tits or tyres it's going to cost you lots of money

  5. #5
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,724
    Quote Originally Posted by crzyman View Post
    N560 end of story, start at 49 or 50g.
    Yes. I max out at 51.
    50.5 is nice. SST a smidge more accurate than AMax for same load and length.

  6. #6
    Member Timmay's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    2,674
    i use it in my t3. I get around .5" groups at 2730-2750 fps with 2209 IIRC

  7. #7
    Member andyanimal31's Avatar
    Join Date
    Dec 2011
    Location
    Makakahi road Raetihi
    Posts
    3,667
    45 g of 09 doing 2720 pushing 140 amax with 20 thou jump lapua brass and 210 primers.it will shoot better than you can
    My favorite sentences i like to hear are - I suppose so. and Send It!

  8. #8
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,724
    What happened Jake?

  9. #9
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477
    loaded 3 sets of 4 @ 49, 49.3 and 49.5 of N560, federal primers, lapua brass.
    screwed the die down and the first one came out at 3.147" Oal so thought what the hell gotta start somewhere.
    49gr group was just over an inch 49.3 put three in one enlarged hole and the forth cutting it. Fired the 49.5 mostly for effect.
    Went back a week later with 2x 5 shots with the 49.3 load, it still shot well. not as well as his first group but put that to nerves or the first one a damn fluke, but they still went in an inch easily.
    Scope was Vortex Viper PST 4x16x50
    He was happy as a sandlark so settled on that and loaded his brass.

    A bit pissed for me as I've been trying for weeks to get a load of N560 and Amax that will shoot that well out of my Sako but I can't.

  10. #10
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477
    Tried evey combo from 3.140 to 3.155" with 47 through to 50grn.
    I'll get one good group then can't replicate it.
    speeds are inconsistant.
    spent damn near 100 bullets trying
    Gimp gave me those 130gr Brergers to try and wildman has given me some serrias, so will try them
    pity as I have some 400 amax's,
    used to have 500 .

  11. #11
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,724
    An alternative is to try IMR4831. Worked great and very fine accuracy with Sierra 140 grn, but not quite the velocity of N560.
    46-48 grns. My load is 47 when I use it.

    Personally, I would try 50.5 grns N560 and 140 SST.

  12. #12
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477
    I'll give those SST'S a go, BC uses them , reckons he ges better accuracy than with the Amax
    cheers.

  13. #13
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477
    Thanks for your kind offer Tim but if I find something as big [gr size] that will shoot better I'll probably trade them off if possible.
    The 120gr Nosler shoots 1/2 consistantly what the amax does so far.
    looks like the 7mm mag trade is a no go so I'll just have to find a better longer range 6.5 load.
    I know it shoot's and I sold my 280 because it shoot's and the 280 was sort of in the same ball park so something will work just a matter of saying , stuff it , giving up on the amax and trying other things.

  14. #14
    By Popular Demand gimp's Avatar
    Join Date
    Dec 2011
    Location
    The Big H
    Posts
    9,478
    When he says he can't replicate good groups with the Amax, he's still getting everything into less than 1moa with 5 shot groups

  15. #15
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477
    Quote Originally Posted by gimp View Post
    When he says he can't replicate good groups with the Amax, he's still getting everything into less than 1moa with 5 shot groups
    Get back in your packet,
    I want better than that.
    And who is this "He" you speak of.

 

 

Similar Threads

  1. Amax 168-165 pils wanted
    By Malhunting in forum Reloading and Ballistics
    Replies: 6
    Last Post: 23-12-2011, 06:59 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!