Thread: Tikka 270 145eldx load

As above, has anybody cracked an accurate load?
Got plenty of the relavent adi powders on hand
Just a thought to ask all the other bored reloaders some info.
I have got 900 6.5 cases to clean anneal size trim and load!
That's me for a bit

Sent from my SM-G950F using Tapatalk

2213sc 58gn @2.698" ogive length (basically as long as my mag allows) gives 2930fps and under 1/2 moa in sako a7.
Work up to it but around 58 gn should see you right

I'm loading for a mates Sako .270 and using Hodgdon superprofrmance powder with the ELDX

Sent from my CPH1903 using Tapatalk

60.0gn 2213sc, Norma Brass, Win LR primer, COAL 3.340 averaging .75MOA for 3100fps

This is out of a build with a 27in barrel though and the loads relatively warm

I think its @Mooseman who uses Superformance and gets fantastic results.

I know the Duleys use superformance in their 270 bushpigs for very good results.

I left my 2213 back in taihape and never stocked super performance as like to stick to adi.
I got plenty 09 06h 08 and 2225 and some 2217.
Good advice guys !
Keep it coming

Sent from my SM-G950F using Tapatalk

57grs of 2213 sc with the 150 gr Noslar Partition only achieved 2809 fps.

Yep 57 grs of Superformance with the 145 eldx is pretty damn good, it is ok in my Tikka but always work up to it. One hole group is the best I have done at 100 yds. Velocity is up there at 3100 fps

Originally Posted by Mooseman

Yep 57 grs of Superformance with the 145 eldx is pretty damn good, it is ok in my Tikka but always work up to it. One hole group is the best I have done at 100 yds. Velocity is up there at 3100 fps

Yip that's what I load 3069fs

Sent from my CPH1903 using Tapatalk

Originally Posted by 25 /08 IMP

Yip that's what I load 3069fs

Sent from my CPH1903 using Tapatalk

How is accuracy and what rifle do you use?

Originally Posted by Mooseman

How is accuracy and what rifle do you use?

It was an 85 sako and I did very little with it but it shot well under 1"

Sent from my CPH1903 using Tapatalk

Have had great success with reloader23 in an a7 3000+ FPS ragged hole groups
As said work your way up find that sweet spot👍🏻For me I have no complaints seem to work well in the field.

Does work up start at max.
That's what buzzman told me

Sent from my SM-G950F using Tapatalk

Originally Posted by andyanimal31

Does work up start at max.
That's what buzzman told me

Sent from my SM-G950F using Tapatalk

Start at max and work up from there

Sent from my SM-G960F using Tapatalk