The .45 TobymagAttachment 13816
Printable View
The .45 TobymagAttachment 13816
Is that just put right into the die or has it been trimmed?
That would be like throwing a brick
What am i missing????....looks like a tampon in a brass case!!!!!!!
Well thats one way to hunt,Quote:
Originally Posted by Scouser
the tampon projectile stops the wound from bleeding, allowing you to drop in town after a hunt and have a latte, and not covered in blood:D
Nah it is just like the paperless society, it will never take off.
I just whacked the neck of a 308 and shoved a .45 slug in it by hand just because
Haha. If anyone has a 44mg die could I borrow it please
The projectile is one that has been fired into a piece of wood 'cos it was more fun shooting it than pulling it
If you were to neck it to 45 would it have a small shoulder?
Necking a straight .308 not cutting it down
Go 44
Yup
Could actually be almost useful.
Like a grown up blackout.
Sent from my GT-S5360T using Tapatalk 2
toby what in hells name are you fellah's talking about?
A 44mag but on a 308 case Rushy.
Would give the 44 some more legs and would also easily go subsonic.
Sent from my GT-S5360T using Tapatalk 2
Yup, should be cheaper to reload for tooQuote:
Originally Posted by veitnamcam
Fuck i don't understand this stuff. How does a 44 fit down a 30 cal barrel? How does a 30 cal shell fit in a 44 cal rifle without rattling all over the place. What use is something that if it can now go faster if it goes slower? Mate this is why I go to the shop and buy the ammo that fits the rifle that hasn't been dicked with.Quote:
Originally Posted by veitnamcam
You put it in a die Rushy. Its fairly simple even you could manage it :P
Think of it as boring out a 44mag to fit a 308 case stretched at the mouth to take 44 bullets.
Sent from my GT-S5360T using Tapatalk 2
So I go get my Black and Decker, whack in a big drill bit, reem out the barrel on a perfectly good rifle and then have to fuck around making bullets that fit it when I already had bullets that worked in it before I started fucking around with it. I don't get it.Quote:
Originally Posted by veitnamcam
Think of it as dressing up your missus to make you feel better if ya know what I mean
Actually you get it perfectly :thumbup::DQuote:
Originally Posted by Rushy
Sent from my GT-S5360T using Tapatalk 2
Wouldn't a .444 Marlin fit the bill?
Is it built off a .308?Quote:
Originally Posted by big_foot
But I undress her to make me feel better TobyQuote:
Originally Posted by Toby
Na just a 44mag stretch limo, give ya the grunt without the hassleQuote:
Originally Posted by Toby
The 44 Auto Mag was made from cut down 308 brass so it has been done ????
Theres a .308 donor rifle so its finding something fun to do with it. Was thinking 338 federal but a pistol cal would be better I reckon.
Automag is a lot shorter.Quote:
Originally Posted by 260rem
What you have there if in 44 is 44 Claymore
I'm pickin' that Toby is trying to do something a bit unique for the hell of it and I can't see much wrong with that. The .44 Claymore is a damn good bush round and loaded with the new flexitip projectiles would be quite devastating I'm thinking. The round would also be very accurate in a bolt gun, so go hard Toby you are getting there. You could load it down with cast bullets or load up with jacketed Flexitips or similar making for a versatile Tobymuncher. and do it 'cos you wanna, it's more fun that way
Toby just build a .500 S&W that will sort ya out for a good hard hitting at both ends pistol caliber :D
