Thread: Trying something, Eric Cortina method of load development

Originally Posted by Tahr

Sounds primo. Pic?

ask and you shall recieve




here is the seating depth ladder.....after tallking to my mate Jock he reckons I should also try the seating depth at .644 again as well, so I have loaded up 5 at .650 and 5 at .644 his logic was that the .644 was right in the middle of the node as opposed to the .650 which is actually closer to the front of the node.
either way which ever shoots better will be the depth settled on, I have also swapped out the trigger for one that has been fettled by a gunsmith to remove that challenge.