Thread: Use LPP as a substitution

I might try and make a sr one. Did you glue the primer to the steel rod

Originally Posted by blip

I might try and make a sr one. Did you glue the primer to the steel rod

The rod is just a small machine screw I had lying around. Being threaded it hangs on with the epoxy used.
IIRC I drilled a hole thru the primer so that the open end goes into the pocket same as it would if it was a live one.
The other way round (back the front) the cup may be slightly flared from firing. Just try some fired primers to see what they feel like.
Drilling a hole and having a suitable screw for a SRP may be a challenge.

I made it about 20 years ago.