Using one powder across multiple calibres.

For those who live on tight budgets like I do this might have some relevance.

I currently use ADI2208 in both my 22-250 and .308 rifles. I have a new tub of this and won't splash for other powders due to cost.

So my question what other calibres would suit this powder as I would like to save for another rifle which could be at least 6 months away maybe more.

Been playing on the ADI site to see what would possibly suit as it reckons medium calibres such as but not limited to .270, 25-06, 7-08 and a few others.

.223, 6mmGT.

2208 goes in most everything except overbore magnums. It's possibly not the best choice for some but it will give you acceptable results. Along with 2206h they're my rifle powders now.

Greetings,
AR2208 works well in the 7mm-08 with 140 to 150 grain projectiles I have tried and likely others as well and does not need compression. The similar IMR4064 was the go too powder in the .270 prior to IMR4350 being introduced in about 1940.
GPM.

I use it in 22-250/ .243/ 7mm-08 . Works well for me.


Sent from my SM-G525F using Tapatalk

I have used it in .223 and .270, Cheapest way to reload years ago when a single income family. use to buy it in a 4kg? tin.

I'm using it for 223 and 30.06.

As mentioned 2208 and 2206h are incredibly versatile.

You might give away 50fps or there about, I don't think the deer, goats or foxes notice it though.

223 would fill your stable well...shorter and lighter than your 22-250 and slightly cheaper to run.... not a lot of point in getting 7mm-08 or a 270 as both too close to the 308 already got.

I used it in my Baikal 223, worked well. ( 23” barrel )
When I swapped to a Savage with an 18” barrel, I swapped to 2206h, but I imagine the 2208 would still work
It’s just 2206h is a little faster burning.

Pretty much anything from 223 to 308, it may not be perfect for certain bullet weights/cartridges but it will work. Heavier bullets will be better.

Thanks everyone certainly food for thought and it might involve replacing one of the current rifles hence why asking what else is worth considering.

I run it in one of my 6.5x55s also tried it in 223 7 08 it goes ok in them mind you Im not one of those guys that has to have the fastest loads on the planet

So perhaps looking at this the other way around might be worthwhile? What are you contemplating in the way of a new rifle?

I use 2208 in my 223, 6XC, 7mm08 and 7mm creedmoor.
Going to start load development in 6ARC with it shortly.
Very versatile power

Quote:

---

Originally Posted by Beetroot

Pretty much anything from 223 to 308, it may not be perfect for certain bullet weights/cartridges but it will work. Heavier bullets will be better.

---

yea 223, 6.5x55, 30-30, 8mm for me with 2208 ......... 8mm would be redundant as you have a 308 (unless you want a classic euro chambering)heavier projectiles better 170-195 gr
as micky said if your adding a rifle maybe go 223 so you can target those smaller critters (less of a barrel burner than 22-250)

708,260,223

223, 243, 708, 6.5/7.7 Arisaka, 6.5 Portuguese, Mosin, K98 and even the 303

make do of what you got...I run the numbers thru Gordons as well, not just from load tables on the internet.

I've used it in 243 with great results, 7mm08 goes well too. Looking at online data it looks quite useful with 150 grain bullets in 300wsm as well, no experience there though.

W760 in 250savage, 25-06,260,708 and 7x57. Moving onto staball 6.5 when that runs out

2206H in 223, 308 and 30-30.

748 in 222 708 308

don't forget the larger bores
I run 2208/varget in my 358 win, 225 gr sierra game king boat tail at up to 2450 fps, out of a single shot would be a great bush gun for shots out to 300 mtr.
Or try the new Hammer's they claim significantly higher velocities.
Z

You just have to look at the ADI Data.

Greetings,
There are not many cartridges that can not be loaded with either AR2206H or AR2209 so while one powder may not do all those two will do most. Perhaps not peak velocities in all cartridges but effective,
GPM.