Thread: Velocity guesstimate

Originally Posted by stug

You could also try a case full of trailboss. Use Shootrnz's cast 151gr HP they will expand and kill at subsonic velocities.

One of the members on the other Forum shoots them at 1630fps out of a 30/30 and has killed reds at 100+ metres, Try 27 grs 2206H and 28grs 2208
both loads shoot fine in 3 .308 rifles

Thanks Robert,how much of the bullet do you think I need in the case neck?i think if I can seat them out a bit longer they will cycle from the mag ok,at the moment the flat nose catches on the way up from the mag,bloody accurate with 8.5g trail boss @ 50m tho.does the other chap neck shoot or the crease behind the shoulder be better you think,be best to try and avoid the major shoulder bones?thanks.

Originally Posted by The bomb

Thanks Robert,how much of the bullet do you think I need in the case neck?i think if I can seat them out a bit longer they will cycle from the mag ok,at the moment the flat nose catches on the way up from the mag,bloody accurate with 8.5g trail boss @ 50m tho.does the other chap neck shoot or the crease behind the shoulder be better you think,be best to try and avoid the major shoulder bones?thanks.

The bullet really can't be seated out further than the crimp groove there is not much of the bullet left in the case, I've been using a different shaped nose punch
it rounds off the flat nose a little may help with feeding haven't had any comments so far, I also have a 170 grain semi pointed mould which will feed properly
if you want to shoot around 1600-1900fps cast from the same lead as the 308HP it will expand well and is accurate I have shot 100 metre 10 shot groups of 1.1/4"
need to do more load development to find it's real abilities.

The other chap goes for heart / lung shots bullets mushroom very well I was surprised how well they held together at that speed

Originally Posted by shooternz

One of the members on the other Forum shoots them at 1630fps out of a 30/30 and has killed reds at 100+ metres, Try 27 grs 2206H and 28grs 2208
both loads shoot fine in 3 .308 rifles

With those loads do you use a fibre filler Robert???

Originally Posted by Huk

With those loads do you use a fibre filler Robert???

No, but try filler if you want I have not tried filler yet still have powders to work with, I prefer not to use filler if I can
will try when I have settled on a load to see if it improves accuracy,
Those loads are quite mild and can be increased we were looking for light plinking and practise loads with reasonable accuracy the 151HP will expand
to .400" at 900fps reliably maximum velocity should be about 1800fps before lead fouling is a problem

Thanks Rob��