167 80grn Targex and 130 62grn Norma. .223
Wallaby and other stuff, be afraid.
Attachment 261756
Printable View
167 80grn Targex and 130 62grn Norma. .223
Wallaby and other stuff, be afraid.
Attachment 261756
153 atip,147 eldm,140targex,129interlock in the prc.
Attachment 261883
Just loaded all my formed 40-70 Sharps Straight cases
Left 255 grain flat nose
Middle rounds. 335 grain
Right 335 in a case formed from 375 2 1/2" Flanged brass with neck expanded.
It will fire form up when shot
Attachment 262150
Have been using just these few cases too sort out the sights and get it ready for longer range testing
Sorry to all the ELDM haters :yaeh am not durnk:
50 red tipped missiles ready for ungulate destruction :D
Attachment 262340
Just loaded 33 rounds of 7x57R
140 Grain Sierra Spitzer Boat Tail
Went until I ran out of powder
Attachment 263139
25 x 30/30. 7.5 TB over a 151hp cast :)
No pictures sorry.
Just loaded 17 rounds of 30 US aka 30-40 for my new old rolling block sporting rifle no5
Made 1898
150 grain Core Lokt and shooting 50mm at 50m
But need too sort a shit front sight out
Attachment 263749
Topping up 300 Blaser Mag ammo using ELD-X 178 gn. Taking the rifle on an outing for the next few days.
Attachment 263878
.223 test loads Maker TRex 62grn. BM2 and CFE223, 25 thou off lands.
Attachment 263879
75gn eldm's on top of 44gn of 2213sc, hopefully sight in the new scope and test the accuracy of my frankenrifle this weekend
Attachment 264005
Some 168gr Maker T-Rex to send out of the 300 WSM at high speed.
Attachment 264036
Range trip to test them out done.
Been shooting jacketed bullets prior and have not cleaned the barrel. Dunno what impact that had, if any. Scope not zeroed either. Just swapped over and boresighted.
First 2 shots with a mild charge just to be safe. Next 7 at a higher charge. Got 3130 avg. will diall it back somewhere between the two and call it good.
Attachment 264047
Yup. How far off the lands/spinny things?Quote:
Originally Posted by Pommy
Absolutely no idea. Barrel has had the throat pushed forward for heavies. I made a dummy round and just stuck the top of the boat tail at the neck shoulder junction, checked it chambered and extracted easily to confirm it wasn't jammed and left it at that.Quote:
Originally Posted by Tahr
Have not measured the amount of jump I'm giving to the 62's in either my 223 or 22-250. They don't seem to care. But if you are trying to control it, I would probably treat them like a Barnes and aim for about 50 thou jump to start off.
Loaded 4 rounds of 44-77 too test some chamber repairs too get proper case extraction from my Buffalo Rifle.
Every case came out with a light pull and shot about 50mm at 50m
Attachment 264108
