Thread: White River Primers - Any misfire issues?

Originally Posted by Forestry

Update

Took my bolt apart and had a look - pretty bloody clean and spring is nice and strong. Firing pin looks good.

Cases - left to right
2x Fed210 that fired Win760 with 162 ELDX
2x WRE that fired RE16 with 140 BTs
2x WRE same as above that didn’t ignite

Attachment 257160

Also one more WRE that did fire and 2 x loaded rounds

Attachment 257161

I’ll try and find my old school bullet puller tomorrow to dismantle the two that didn’t ignite. I did shake them and can hear powder inside…

Man those primers are flat I've never seen primers sitting that flat after being installed.


Sent from my CPH2531 using Tapatalk

Originally Posted by 25/08 IMP

Man those primers are flat I've never seen primers sitting that flat after being installed.


Sent from my CPH2531 using Tapatalk

Oh man....milserp 223 when primer sticks on burr from crimp....the seater jams so just have to keep applying pressure to flatten itso can remove case...yet they still go bang. Scarey as fook.i take all other primers out of tray counting them as I go to make sure it hasn't done a double up(never has yet) I've learnt to remove crimp with tiny champher of pocket mouth with deburring tool.