Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Ammo Direct


User Tag List

+ Reply to Thread
Results 1 to 9 of 9
Like Tree4Likes
  • 2 Post By stevodog
  • 2 Post By Micky Duck

Thread: Win 760 and Magnum primers

  1. #1
    Banned
    Join Date
    Mar 2016
    Location
    auckland
    Posts
    2,453

    Win 760 and Magnum primers

    Do you think it necessary or appreciable benefit to run magnum primers with win 760?
    I am using in a 284 due to my usual 2209 listing as compressed in higher load range. Using cci match primers and seems to shoot and clean ok...

  2. #2
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,891
    It can't hurt. I have experianced ignition issues with ball powder and standard primers in other cartridges. Anything using small rifle primers I use CCI450's. Mind you, I have used 760 in 6.5x55 with standard primers without issue.

  3. #3
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    I run 760 with standard primers in a 260 imp and have good ES. Not as good as I had with 2209 but plenty good enough for what I do with it.

    Gives me a bit better velocity for less as well with 120-130 grn bullets.
    Will now try some mag primers to see if there is any improvement tho.


    Sent from my SM-G935F using Tapatalk
    Do what ya want! Ya will anyway.

  4. #4
    Member outdoorlad's Avatar
    Join Date
    Dec 2011
    Location
    Christchurch
    Posts
    3,010
    I use W760 in my 243 and have always used standard primers with no issues.
    Shut up, get out & start pushing!

  5. #5
    GWH
    GWH is offline
    Member
    Join Date
    Jul 2012
    Location
    Napier, Hawkes Bay
    Posts
    4,460
    I've run H414 (760) for years in various cartridges, I always use mag primers (fed 215) with it.

    It goes well in my 17" barreled 284 :-)

  6. #6
    Banned
    Join Date
    Mar 2016
    Location
    auckland
    Posts
    2,453
    Thanks for all replies...ill try some magnums some time to see if there's any improvement...mostly I think I'm the limiting factor and don't go looking for improvement if things are going ok.
    Nice powder to trickle up load weights with though aye.
    wsm junkie and GWH like this.

  7. #7
    Member
    Join Date
    Jul 2014
    Location
    BOP
    Posts
    4,025
    Use 760 in my 338 Win Mag with Magnum primers works well.

  8. #8
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,797
    I use magnum primers for everything except subsonics.
    looking at older manuals with .270win data some recipies call for magnum primers and another doesnt for same load/powder.
    reason I use magnum primers is we bought heap cheap......
    Kiwi Greg and 7mm300wby like this.

  9. #9
    Member
    Join Date
    Jul 2017
    Location
    Whangarei
    Posts
    1,195
    I use standard CCI 200 Large Rifle with W760 (H414) amd Win 780 Supreme.
    Have not had any issues but have only run 2 rounds with the W780 across a Crono.
    They were within 5 fps but 2 is not a reliable sample.
    I do have a grouping problem with the W780.
    Z

 

 

Similar Threads

  1. federal magnum primers eta
    By distant stalker in forum Reloading and Ballistics
    Replies: 8
    Last Post: 21-09-2014, 01:01 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!