Thread: winchester/ball powders for cast rifle loads

Ok, thankyou. With powder supply being the way it is I thought I'd check all available options.

Originally Posted by Three O'Three

Ok, thankyou. With powder supply being the way it is I thought I'd check all available options.

If you just want to shoot and not worried about velocity look for IMR's 700x and 800x the shotgunners use shit loads of it and can be found easier than most other
powders they ignite easily and burn fast good for low velocity plinking loads, A Google search should bring some data at least for the .303

Originally Posted by shooternz

If you just want to shoot and not worried about velocity look for IMR's 700x and 800x the shotgunners use shit loads of it and can be found easier than most other
powders they ignite easily and burn fast good for low velocity plinking loads, A Google search should bring some data at least for the .303

@shooternz. Is IMR's 700x and 800x position sensitive, does it need a filler?

all theNot in my .300 BLK, I did use a little Dacron in .308 but not really sure if I needed to
all the Gurus at the time recommended it but a lot of what was SOP back then turned out to be BS,
try it with out; nothing bad will happen the less steps in the process is better.

Originally Posted by Three O'Three

Ok, thankyou. With powder supply being the way it is I thought I'd check all available options.

Try unique and look up the Ed Harris loads on mr google

Originally Posted by omark

Try unique and look up the Ed Harris loads on mr google

@omark. Will the Ed Harris load work with AP70N?

Originally Posted by Three O'Three

@omark. Will the Ed Harris load work with AP70N?

Ap70 is similar to unique but not quite the same. Stick to the published load from Ed

Originally Posted by Three O'Three

@omark. Will the Ed Harris load work with AP70N?

If you can get your hands on some old ICI Nobel 78 Shotgun Powder pm me..I've done a lot of work with it including with 303 for velocities of 1200 to 1800fps with cast bullets. 1600fps is a sweetspot for accuracy in my 303B rifles. I also use it in 30-30 and 308. Lots of old duck hunters around Huntly. Bound to be some in some old reloader's shed somewhere. Ask at the local clubs. Opened containers that have been reasonably well stored have been my main source.