Show us ya rimfire bunny rigs

CZ 452 American 22lr wearing a synthetic stock from a silhouette model. On the raspberry orchard last nighthttps://uploads.tapatalk-cdn.com/201...e6726990f1.jpghttps://uploads.tapatalk-cdn.com/201...4883b178eb.jpghttps://uploads.tapatalk-cdn.com/201...d0fcecec52.jpg

Sent from my SM-G930P using Tapatalk

Great to see ya dressing em out GWH, will be beauty in the slow cooker :cool:

I too expected to see a few more semis. Apparently under the new law you can have a pistol grip AR style stock on a 10/22. Ruger 10/22s are the new rifle that can be accessorised and blinged up.

It seems to be how the americans market stuff buy a rifle bike or something like that then spent heaps on accesories to try and get it to work properly or buy something else that doesnt need all the blingy shit

Not a rimfire rabbit gun, but a rabbit gun none the less. Diana PCP air rifle. .25 cal. Arken 4-14 scope, which is surprisingly nice (Cheers Ken at 55six). Chosen as it was one of a handful of scopes that has adjustable parallax that will go down below 10m.
Hits the .22 spinners pretty hard, so cannot wait to introduce this to the bunnies close to the house, and on the properties they won't let me onto with a .22.
Attachment 124094

Quote:

---

Originally Posted by quentin

Not a rimfire rabbit gun, but a rabbit gun none the less. Diana PCP air rifle. .25 cal. Arken 4-14 scope, which is surprisingly nice (Cheers Ken at 55six). Chosen as it was one of a handful of scopes that has adjustable parallax that will go down below 10m.
Hits the .22 spinners pretty hard, so cannot wait to introduce this to the bunnies close to the house, and on the properties they won't let me onto with a .22.
Attachment 124094

---

What sort of velocity does it poke em out at?

Quote:

---

Originally Posted by veitnamcam

What sort of velocity does it poke em out at?

---

28gn pellet @920fps with the standard setting on the regulator. There's room to add a bit more velocity if I get to a position where 920 is not doing the job.

Attachment 124427

CZ452 American 22LR
Nikon Prostaff Target EFR 3-9x40
Hushpro RF2 Suppressor

So, cz or savage for a bolt 17hmr?

Quote:

---

Originally Posted by Danger Mouse

So, cz or savage for a bolt 17hmr?

---

I would choose the CZ over the Savage but to be fair my marlin is brilliant too and I've seen no reason to upgrade.

What scopes and reticles are you all running?

I'm running an Olivion tracker 4-16×44 AO mildot
Its cheap but very effective, never tried to work out the mildots as I generally don't shoot it much past 150 yards.
Might figure it out one day when I have time to play

Quote:

---

Originally Posted by Danger Mouse

So, cz or savage for a bolt 17hmr?

---

Savage have a nicer trigger, and more accurate than the one or two CZs I've compared them with - but you can get better and worse examples of both of course.

CZ are prettier, better finished and handle really nicely.

Both are good options, might depend which qualities you value more and which one fits you best.

Quote:

---

Originally Posted by Danger Mouse

What scopes and reticles are you all running?

---

I put one of these on my .17 HMR

https://www.vectoroptics.store/Fores...iflescope.html

Great scope, solid, good clear glass with 30 mm tube, very fine dot so i find it great for bunnies.

If you order to scope they come with their own scope rings which fit onto a picatinny rail but i had to order a set of dovetail rings in order for it to fit on my CZ.

Ruger 10/22 Target Lite .22lr in a PMACA chassis. With VX3 4.5-14 CDS and a DPT can.
Tikka T1x .22lr With VX2 and DPT can.

Attachment 124990