Ignition failure still or not forming shoulder on first firing?Quote:
Originally Posted by tetawa
Sent from my SM-S906E using Tapatalk
Printable View
Ignition failure still or not forming shoulder on first firing?Quote:
Originally Posted by tetawa
Sent from my SM-S906E using Tapatalk
Got a couple with the Kimber.257 the other night.
First one was 271 yards. The 115NBT passed through and broke both shoulders. Still made it 50 yards.
It was close to dark so vid quality not very good.
Attachment 252049
https://www.youtube.com/watch?v=grLO0p0xSlI
The second one was 315 yards (using IR). Shot a bit high and you can see the shots' bulge through the hinds back. It was off my knees so I 'suppose I can be excused. Never exited but wrecked off side shoulder. Dropped on spot.
Attachment 252050
This is the hind (above)
https://www.youtube.com/watch?v=TMMyI-PdJ1E
Does that unit compensate for range?
Yes. It has ballistics in it that work with the range finder. There is an aiming dot that moves according to the range. Very simple to set up and very effective.Quote:
Originally Posted by Shearer
Have necked up to 270 from 6mm then to 257, no problem with WW and Norma brass, good primer strike, just the R/P brass not achieving good primer strike, 40% failure, will get there in the end. Getting excellent accuracy while fire-forming using the old 95 Bergers moli-coated. 15 shots in 25mm, too scared to show it in the 3 shot group thread.Quote:
Originally Posted by Mathias
Ok. I couldn't see the aiming dot in the video. I am partially colour blind though....Quote:
Originally Posted by Tahr
@Shearer Your vision is fine. The ballistic dot and screen data doesn't come out on the vidsQuote:
Originally Posted by Shearer
I used one for many years and Loved it!!!. I eventually re chambered it it .257 Roberts Ackley improved... And loved it even more. nothing ever walked away after being shot with it.. in all the years I had it. On a side note, it was eventually stolen and as I was used to the 25 cal and had lots of projectiles. I brought a 25-06. And also as the Improved was knocking on 25-06 speeds anyway. However I don't think it was ever as effective as the Roberts.
I mainly used the Hornady 120gn Hollow points
@Tahr did it come with the rail mount or is that extra?
@outdoorlad The Sytong came with that. So does the Zulus.Quote:
Originally Posted by outdoorlad
2 in a row. 115 NBT.
80 and160 yards.
Attachment 257394
Attachment 257395
Bit of fun over the weekend. That last shot - bullet came out in front of off side shoulder. Pretty good performance. 100grn Barnes ($2.20 worth!).
https://youtu.be/6c4qAPD-6k8
If anyone is keen to give the Roberts a go, there is a BSA majestic sitting at Deadeye Dicks in levin. Has a new stainless barrel on it, even has the iron sights put back on. They’re asking something like $1300 for it, but given that it’s been there for at least 5 (probably closer to 10) years I reckon you could get it for a reasonable price.
Still having fireform problems, can I buy 6 unfired 257R cases off someone to check measurements, gunsmith recons he put the correct "crush" for the standard 257R to chamber. All my brass is 6mm or 8x57 which I have resized.
