Thread: Anyone hunting with a 9.3x62

Yeah, cheers Muzza, it's looking promising, been doing it bit of research and it should handle the 9.3x64 Brenneke too.

Will keep looking for a suitable donor, that one went for way too much!
I prefer the straight stock too so probably for the best.

Man, the old brass is pretty pricey, gotta bite the bullet though I guess (pardon the pun) heh heh heh

My 9.3x64B RWS brass was $70/box of 20. I have close to 100 as some came with the rifle, it will out last me (very good quality).

I have some brass, dies and projectiles here, I was thinking about putting on TM... hadnt quite made up my mind if I could part with it?? But not getting the use at the mo so sure there's a good home out there

Originally Posted by CZ Lux

I have some brass, dies and projectiles here, I was thinking about putting on TM... hadnt quite made up my mind if I could part with it?? But not getting the use at the mo so sure there's a good home out there

Check your pm's

found this load data, might be of interest for sum of you guys,
http://1587510142.rsc.cdn77.org/RRoo...utFormulas.pdf
I tried CFE223 with 60gr, under a 250gr accubond, and shot great with two three shot groups of 2.5", off hand, over irons at 50M,
going to put a scope on now, and really test loads.



Over the last week I have fired 70 rounds, changed front blade three times from ..325 to .410 to .440, rear adjustable blade installed on barrel, and finally a williams peep, on rear scope mount. all full power loads in a 6lbs ten oz husky 98, glad its over for a bit.

sorry for the sideways photo, but this stupid web sigh does that, and i don't know how to correct it, they are orientated correctly on my computer.

Excellent shooting Southerman, that speer load looks positively dangerous

Originally Posted by jakewire

Excellent shooting Southerman, that speer load looks positively dangerous

Yea, not bad, but that's 25 M off standing off hand, so ok, but will do for now, really need a high bench, to perform standing shots with a front bag, recoil is brutal sitting down as rifle is very light. I am happy to have the new irons dialed in, took 9.3 out for a walk, for a whitetail deer yesterday, but heavy snow and fire damage made for a tough day, with no deer seen.

@norsk has sent me 10 norma cases in this. Anyone keen on it? Also some other things ive never seen? Stripper clips and a somethingorother

Free to good home

The more i look at these cases the more i think i should get a chamber to wrap around them

Originally Posted by Gibo

@norsk has sent me 10 norma cases in this. Anyone keen on it? Also some other things ive never seen? Stripper clips and a somethingorother

Stripper kilps for mauser K98 and a stripper clip for loading AR15 mags

Originally Posted by Gibo

Free to good home
Attachment 57969

Keen on the brass @Gibo chur.

Pm me your address mate

Pm inbound