Do ya put it on scope before mounting or After?
Printable View
Do ya put it on scope before mounting or After?
Does it leave marks when removed? And also does it stick well?Quote:
Originally Posted by R93
Main reason im getting my scope an suppressor taped is because i have a wood stock w/blued barrel.
And the scope is green which kinda doesnt look right haha
Would also like to know^Quote:
Originally Posted by 223nut
No. Will not leave marks on an alloy scope. You can remove it and reapply it several times.Quote:
Originally Posted by XBoltstalker
It will come off after a while from being wet etc but I just use insulation tape to secure where the tape finishes. Has never come off since I done that.
Sent from my SM-G900F using Tapatalk
Sounds good, might give it a crack. Would you suggest putting it on before mounting the scope?
Mount your scope and set your rifle up before you put the tape on. Cut lengths of tape to cover the bits you want wrapped. Works best when you have a good overlap of tape.Quote:
Originally Posted by XBoltstalker
http://uploads.tapatalk-cdn.com/2016...511c16d6d5.jpg
I'm guessing you don't cover the barrel? Seen someone with that and figured it would wreck havoc with the harmonics!
Probably. My scopes are detachable so I never gave that a thought. 😆
Sent from my SM-G900F using Tapatalk
Cheap as all get out from Ali Express, about $2 a roll from memory and free postage
I doubt it would effect the harmonics, but you do have have to watch your barrel doesn't rust or pit under the tape from wetness, I've seen some light pitting on a stainless tikka that had camp tape on it.Quote:
Originally Posted by 223nut
Yeah camo tapes awesome, Just make sure to superglue it on like Nibblet did :thumbsup:
Lol just don't buy old dodgy tape of the forum.Quote:
Originally Posted by Philipo
How do you get the roll of tape between the scope and the rifle?Quote:
Originally Posted by Kooza