Thread: PARD TA LFR HANDHELD, yerh or narh

Originally Posted by zeropak

I'd be interested in your feedback on the the Pard 4K NV. I have the older 2K version and its a great piece of kit. I have the 850nm version but now use it with a 940nm external torch because, yes the deer definitely see the 850nm and will spook, especially at closer ranges. The 940 depending on conditions is good on my older version Pard out to about 250m maybe 300m. both the built in Pard IR and my external torch a VCSEL laser and not LED which also makes a big difference.

Got it mounted up but need a 0moa pick rail to make every thing line up.
It's unreal during the day when I zeroed it and really easy to do it as well.
The ballistic data system worked well and every thing is quite intuitive.
I took it out last night and shot a couple of hares but not a test to be fair.
The pard thermal hand held is out the gate good and performing as well or better than a couple of high end ones we compared to.
Will let ya know when I have sorted the rail.

Sent from my SM-A226B using Tapatalk

The pulsar axion xm30f is another $500. Anyone used both ? Don’t know a lot about these but have mates that have the pulsar versions . Which seem good . Are there extra functions on the pulsar or better quality ? How do they rate against the others including the pard ?

The pulsar xm30f is their entry level low resolution model and would be a step backwards. Also has no LRF. The next step up on the Pards for not much more is the Sytong XS models.

I got the Pard TA32-25 a few weeks ago. Was a toss-up between that and the Sytong. I read on here that the Sytong may have better optics, but I chose the Pard not only because it was $500 cheaper but equally because it has a slim profile with the LRF built into the main body rather than bulging out the side as the Sytong does.
I've had it out twice hunting rabbits, and not disappointed, can easily pick them up at 400+ metres. Also both times found hedgehogs and rats out in the paddocks too, that I'd never seen with a spotlight or NV, which highlights the extra capability. Not that I'm into shooting hedgehogs, rats maybe...

The first time I used it I rushed out from the car to see what I could see, hoping not to be underwhelmed after outlaying $2200.... Immediately picked up a couple of rabbits right from the fence, a couple of paddocks away. Pretty fuzzy but still obviously rabbits, and easily discernable from the horses . So I was pretty happy. Went after them and a few others, all good. Then about half an hour later with another couple of bunnies in view, I was fumbling around with the buttons trying to get the video going, and suddenly everything went crystal clear and sharp as! Turned out I unwittingly had the digital zoom way up, and I'd just dropped it back to 1x (2.6x optical)! So my happiness level went from completely satisfied, to pretty darn impressed.

Only negative I had was that the diopter adjustment on the eyepiece is easily adjusted and would get turned in and out while going in and out of my bino pouch, every now and then I'd become aware of it being not as sharp as it could be, but easily fixed.
I've since designed a 3D-printed mounting system for my backpack shoulder strap like youtubers have for their SLR's, which is mint. Allows the thermal to be deployed or stowed one-handed, so long as you have a dextrous enough pinky finger to hit the on switch. (Beats me why they didn't put it under your index finger but no big deal.) Might post that at some point in case anyone's interested.

Originally Posted by stickman

I got the Pard TA32-25 a few weeks ago. Was a toss-up between that and the Sytong. I read on here that the Sytong may have better optics, but I chose the Pard not only because it was $500 cheaper but equally because it has a slim profile with the LRF built into the main body rather than bulging out the side as the Sytong does.
I've had it out twice hunting rabbits, and not disappointed, can easily pick them up at 400+ metres. Also both times found hedgehogs and rats out in the paddocks too, that I'd never seen with a spotlight or NV, which highlights the extra capability. Not that I'm into shooting hedgehogs, rats maybe...

The first time I used it I rushed out from the car to see what I could see, hoping not to be underwhelmed after outlaying $2200.... Immediately picked up a couple of rabbits right from the fence, a couple of paddocks away. Pretty fuzzy but still obviously rabbits, and easily discernable from the horses . So I was pretty happy. Went after them and a few others, all good. Then about half an hour later with another couple of bunnies in view, I was fumbling around with the buttons trying to get the video going, and suddenly everything went crystal clear and sharp as! Turned out I unwittingly had the digital zoom way up, and I'd just dropped it back to 1x (2.6x optical)! So my happiness level went from completely satisfied, to pretty darn impressed.

Only negative I had was that the diopter adjustment on the eyepiece is easily adjusted and would get turned in and out while going in and out of my bino pouch, every now and then I'd become aware of it being not as sharp as it could be, but easily fixed.
I've since designed a 3D-printed mounting system for my backpack shoulder strap like youtubers have for their SLR's, which is mint. Allows the thermal to be deployed or stowed one-handed, so long as you have a dextrous enough pinky finger to hit the on switch. (Beats me why they didn't put it under your index finger but no big deal.) Might post that at some point in case anyone's interested.

You made a great choice as I really rate my pards as I have the same thermal as you and just setting up the new 4k NV scope this week.
Bang for buck and serviced local with modern leading technology with the enclosed ballistics app with the NV scope.
I got the 950 light so keen to see how that goes.
Just sorted the zero moa rail so now mounted and ready for testing!

Sent from my SM-A226B using Tapatalk

Originally Posted by stickman

I got the Pard TA32-25 a few weeks ago. Was a toss-up between that and the Sytong. I read on here that the Sytong may have better optics, but I chose the Pard not only because it was $500 cheaper but equally because it has a slim profile with the LRF built into the main body rather than bulging out the side as the Sytong does.
I've had it out twice hunting rabbits, and not disappointed, can easily pick them up at 400+ metres. Also both times found hedgehogs and rats out in the paddocks too, that I'd never seen with a spotlight or NV, which highlights the extra capability. Not that I'm into shooting hedgehogs, rats maybe...

The first time I used it I rushed out from the car to see what I could see, hoping not to be underwhelmed after outlaying $2200.... Immediately picked up a couple of rabbits right from the fence, a couple of paddocks away. Pretty fuzzy but still obviously rabbits, and easily discernable from the horses . So I was pretty happy. Went after them and a few others, all good. Then about half an hour later with another couple of bunnies in view, I was fumbling around with the buttons trying to get the video going, and suddenly everything went crystal clear and sharp as! Turned out I unwittingly had the digital zoom way up, and I'd just dropped it back to 1x (2.6x optical)! So my happiness level went from completely satisfied, to pretty darn impressed.

Only negative I had was that the diopter adjustment on the eyepiece is easily adjusted and would get turned in and out while going in and out of my bino pouch, every now and then I'd become aware of it being not as sharp as it could be, but easily fixed.
I've since designed a 3D-printed mounting system for my backpack shoulder strap like youtubers have for their SLR's, which is mint. Allows the thermal to be deployed or stowed one-handed, so long as you have a dextrous enough pinky finger to hit the on switch. (Beats me why they didn't put it under your index finger but no big deal.) Might post that at some point in case anyone's interested.

Keen to see your 3d printed mounting system!