Attachment 219766Attachment 219767
Greetings to you all,
It never ceases to amaze me how those of us, of a certain age, can get such a kick of faffing about with old rifles. The subject rifles are chambered for a cartridge on which the sun was setting at the end of the century before last. This fills us with joy as does returning the rifles to their former glory and maybe even taking them for a hunt. Well done @akaroa1 you have been blessed. The word has obviously got out in the nice old rifle fraternity that a nice home can be found in your safe.
Regards Grandpamac.
My gunsmithing mentor Mr Vulcan barrels has just visited expressly to view this wonderful pair of rifles
So I now have made the promise to get the sights on the latest one sorted and have them both ready to be shot together ASAP and for us to share a very special whisky afterward
I have suppressed three consecutive serial numbers tikka t3x in 308 last week , imagine how hard it going to be to re unite them in 140 years from now .
There would be so many thousands of them on the nz market!
Soldered a brass blade into what was left of the original Ballard front sight base
Attachment 220555
And drifted in a BSA rear sight that fitted the original dovetail
Attachment 220556
Fired the first two shots at 50m with the rear sight elevator 1/3 up
Pretty happy with that
Attachment 220557
Took the sight elevator out and fired 3 more shots
Attachment 220558
Didn't shift the impact much but my guess it's zeroed for 100m maybe now
Have loaded 25 rounds and will shoot them both together some time soon
shock horror,is that an adjustable nut fcuker I spy on your bench?????
thought you would be a full on spanners shadow hung on wall or in foam lined draw sort of a fella......tis ok for mere heathens like myself to use such a lowly instrament but for it to be seen in your presence raises all sorts of questions about the state of the world!!!
and where is the forewood??? it might possibly lower impact with barrel harmonics??
taller front =lower rear.....maybe your new blade could be tad low for ideal.....
they are really nice congratsQuote:
Originally Posted by Waynesworld
@Micky Duck it lost its fore end and sights some time in the last 140 yearsQuote:
Originally Posted by Micky Duck
I don't think barrel harmonics are a big deal with 7/8th inch parralel octagonal barrels
The sights were just to see if it could fling bullets reasonably close together
Now that I know it can, I will make some decent sights for it that will be more suited to dawn and dusk
A #4 Ballard is a hunting rifle
Well, FMDrunk
I wonder how many came in a crate ex factoryQuote:
Originally Posted by akaroa1
There's a pretty good chance there's a number adjacent to these still in NZQuote:
Originally Posted by johnd
That they are now together and both fully functional at 140 years old is pretty exciting
The more recently acquired one is mechanically in better condition, but rougher on the exterior.
So will be a very good shooter once I find a vintage tang sight for it
The second Ballard that was minus sights and a fore end now has a new fore end which is a nice match with the original butt stock
Attachment 222451
Attachment 222447
A new old globe front sight.
Actually a Winchester sight but often used in the Ballard in the day according to the Ballard Bible
Attachment 222448
A rear sight dovetail blank made from a broken front sight
Attachment 222449
A Lyman tang sight with the correct hole spacing and staff angle.
But needs a better staff and aperture.
This staff is for a boys rifle and boys eyes!
Attachment 222450
I still need to get a permit to import for a reproduction hard rubber butt plate from USA.
Only $35us but what a butt pain to get one
Revisiting this old friend to get it hunting ready
Made a pass through sizer to get the bullets to the perfect size for the fired cases and no resizing with BP loads
Tapped and fitted a Parker Hale sight eye cup
Attachment 240424
Been doing some testing with grease cookies and wads to be able to shoot multiple shots without BP fouling being a problem.
Seem to have it pretty well sorted.
First few shots at 60m were low.
Wound the staff up two turns and fired last 4 shots.
Attachment 240425
So cleaned my 8 in use cases to reload this evening.
Get another 50 from Gunworks and load some of those and this rifle can go for a wander
