The 16" 270

I have been talking for a while now about doing a short 270, more for my own interest than anything else. I picked up a Sauer 100 classic that was on special a week or two back and took it straight to gunworks to get the chop and a suppressor fitted, you should have seen the looks I got when I told them what I wanted done! I wanted to keep overall length shorter than the rifle would be without any suppressor or chop so Robbie said he would build a suppressor for it based on their 41mm diameter 9 inch long model, but add an inch to give an overall length of 10 inches, 5 inches back, and 5 inches forward of the muzzle once it was cut to 16" he also decided to use a stainless blast baffle inside the suppressor to cope with any abuse.
The rifle was originally a 22" barrel so overall length now with the suppressor is still an inch shorter than that.
I got the rifle home yesterday and wasted no time getting some load development rounds ready to go, I based a lot of what I was doing from advice on American forums from guys shooting the 15 inch Thomson Contender pistols in 270win, I went with reloader 17 powder and 110 grain Sierra Pro Hunters, these projectiles are excellent killers in every other caliber I have used them in (7mm08 and 260rem) so I thought I can't go too far wrong if I can get them moving quick enough.
I found it a bit tricky shooting for accuracy at 100 yds with a 6x scope but found a happy spot at 58grains of reloader 17 and have just put it through the chrono and came up with 3060fps, I punched this information into strelok and confirmed I was getting the correct drop at 400 yards so can be confident the velocity is correct.
Happy with how it's turned out and should be a handy little rifle

Specs are

Sauer 100 classic 270 win
Shortened barrel to 16" and threaded
Gunworks 41mm suppressor with stainless internals, 5" forward, 5" back
Talley lightweights
Kahles Helia S 1.5-6x42
110gr Sierra Prohunter, 58grs R17, 3060fps

Attachment 90780
Attachment 90781
Attachment 90782

#27GANG

That's cool man, classic lines and scope big fan. Keen to see what performance is like on game. Will follow with interest.

Flames will hit the deer before the pill :D

#27BBQ

A mate uses the 110gr Pro Hunters in his 270 & swears by them. He's shot a shit load of deer with them so no BS.


Sent from my SM-A530F using Tapatalk

Quote:

---

Originally Posted by berg243

need a pic shooting at night with no suppressor .should have a decent muzzle flash. :thumbsup:

---

After shelling out for a custom suppressor I don't imagine Ryan would be shooting this without a suppressor !

However, to your point and as noted by @Gibo - in the absence of a suppressor he could fire a shot and then run up and club the intended target to death with that fine piece of wood !

awesome rifle and sounds like you have got the load to do the bizo.......now to see what you can do with a 150 for bush work????or swap the cup n core for a barnes of same weight and leave all else the same?????

Quote:

---

Originally Posted by Micky Duck

awesome rifle and sounds like you have got the load to do the bizo.......now to see what you can do with a 150 for bush work????or swap the cup n core for a barnes of same weight and leave all else the same?????

---

I put a few of my 150gr Gameking loads (loaded for sako 75) through it and it shot them really accurate, didn't chrono though, I think the 110 will be a good allrounder and do Bush to 400yds no worries with good shot placement, it still has 1000ftlb at 450

hot shit mate...go the mighty poohseventy

I reckon 110gr in .270, turns them into a great laser, I've gone that route after getting 2x.270's on a trade, one of which just fits like a custom, and groups incredibly well .(no suppressor). I was going to 6.5-it, but cant destroy something that works so well. With a fixed 6x scope, and my self-imposed limit of 250-ish metres, I find under 3k works for me...and f/all recoil, (think .243-)..for me, 110gr ph's, has been like re-inventing the .270

fark yeah !

Noice

Quote:

---

Originally Posted by Gibo

Flames will hit the deer before the pill :D

---

Great pig gun. Drop it and singe it in one operation.

I won’t lie I absolutely hate 270 myself
But that my friend is a nice rifle I like the wood that’s stunning
And 3060fps is Surpriseing thought you would be less than that with such a short barrel
I thought you would probably be getting more 270/08 velocitys as quite a bit of that 58gn powder change would be burned in the air after it left the barrel surely
Seems a nice handy kit

Quote:

---

Originally Posted by rambo-6mmrem

I won’t lie I absolutely hate 270 myself
But that my friend is a nice rifle I like the wood that’s stunning
And 3060fps is Surpriseing thought you would be less than that with such a short barrel
I thought you would probably be getting more 270/08 velocitys as quite a bit of that 58gn powder change would be burned in the air after it left the barrel surely
Seems a nice handy kit

---

Surprisingly I thought that the suppressor would be black as anything after just a few rounds but looking in it with a torch it's not, R17 seems a strange powder being on the slow burning end of the spectrum but it works well in short barrels in a lot of calibers, guess I will have to give it the old night time test with no suppressor to really see what's getting burnt outside the barrel

Quote:

---

Originally Posted by Ryan_Songhurst

Surprisingly I thought that the suppressor would be black as anything after just a few rounds but looking in it with a torch it's not, R17 seems a strange powder being on the slow burning end of the spectrum but it works well in short barrels in a lot of calibers, guess I will have to give it the old night time test with no suppressor to really see what's getting burnt outside the barrel

---

take a picture?

Quickload says that with that barrel length and load (but not tuned for COL and case capacity) that you are burning a bit over 98% of the powder. That's not too bad, lots of fairly popular loads are round the 95%