Thread: 20 moa on sako

Originally Posted by buzzman

With my swaro s5 I need to run a 20moa base wats the best way to do it will the Burris inserts fit in optilocks cheers

Oh oh, looks like you gunna need a new scope - anyone got a spare nightforce

I use them on a few rifles a couple of F class rifles put a 20 thou off set in both and you have heaps of elevation depending on scope brand you may not be able to get a 100 metre zero, they are also good for correcting
miss alignment in the mounting holes in the receiver Remingtons are known for it,

This is the best i can do at the moment, havent a real close up I can find
Optilock bases and low rings 4.5x14x40 leupy 30mm scope

Waitaki Rail and PM11

I'll see if I can find a better rail pic.

Originally Posted by jakewire

This is the best i can do at the moment, havent a real close up I can find
Optilock bases and low rings 4.5x14x40 leupy 30mm scope
Attachment 39318
.

Some xtra-lo optilock 30 mm rings would lower that Leupold nicely, I imported mine from EuroOptic.

B

Originally Posted by shift14

Some xtra-lo optilock 30 mm rings would lower that Leupold nicely, I imported mine from EuroOptic.

B

I'd suggest contacting beretta NZ they are very helpful


Sent from my iPad using Tapatalk

I may have given the wrong impression chaps
thats a before and after.
same rifle different scope set up.

Was just put in to show the waitaki enguineering part and the difference from what i had
And the alternatives .

Originally Posted by BRADS

I'd suggest contacting beretta NZ they are very helpful


Sent from my iPad using Tapatalk

@BRADS i think you posted in wrong section - jokes are in Off Topic

Originally Posted by wsm junkie

@BRADS i think you posted in wrong section - jokes are in Off Topic

No I was being serious
Look what they sent to put a 52mm objective vx6 on my gun.
20moa above the barrel!

Ba ha ha ha ha habha ha ga ha ga ha ha ha ha ha ha.
Oh sorry...that had to put a tear in your nighty

Originally Posted by veitnamcam

Ba ha ha ha ha habha ha ga ha ga ha ha ha ha ha ha.
Oh sorry...that had to put a tear in your nighty

I just smiled mate, and thought I could put massive scope caps on


Sent from my iPad using Tapatalk

Carry handle????

Originally Posted by jakewire

I may have given the wrong impression chaps
thats a before and after.
same rifle different scope set up.

Was just put in to show the waitaki enguineering part and the difference from what i had
And the alternatives .

Roger that

Originally Posted by BRADS

No I was being serious
Look what they sent to put a 52mm objective vx6 on my gun.
20moa above the barrel!
Attachment 39334

Tragic.

B

Originally Posted by BRADS

No I was being serious
Look what they sent to put a 52mm objective vx6 on my gun.
20moa above the barrel!
Attachment 39334

You might be interested in one of these

Originally Posted by buzzman

With my swaro s5 I need to run a 20moa base wats the best way to do it will the Burris inserts fit in optilocks cheers

What is the model of you Sako ? A7, TRG or what