Thread: .22 is misfiring - empty shells are stuck in gun and crushed - any ideas?

Hi everyone

My partner has a Marlin 795 - .22 semi-automatic that he's owned for 2 years and never had a problem with it.

Lately it has started misfiring. The bullet will fire but the empty case gets stuck in the gun and is very bent on one side.

He uses the gun regularly and cleans it when required.


Any ideas of what may be causing this to happen?


Thanks in advance

got a pic of extracted case

Broken extractor.

Sent from my SM-G935F using Tapatalk

Originally Posted by R93

Broken extractor.

Sent from my SM-G935F using Tapatalk

Or a peined chamber from dry firing.

Can you post a picture of the chamber and the extracted empty case.

The good news is both issues are easily fixed

Cheers
Pete

welcolme to the forum you and your partner will find a lot of info here

The 795 has pretty chunky extractor claw so I doubt it would break easily, but it does nestle in a very close fitting groove in the the bolt. You should be able to move it reasonably freely with a fingernail.

Thanks for your quick replies!

And thanks for the welcome Northdude


Here are some pictures - hopefully they show enough detail.

No expert as are some here - but I have a question.
The case looks like it's too long for the chamber.
Is he using 22WMR ammo by mistake?
Has the box been kept?
That will help in this identification.
Might be a possible reason for the extraction difficulties.
The case looks like it's jamming in the rifling and being mashed about when loaded by the action.
My 2c worth.

Originally Posted by WallyR

No expert as are some here - but I have a question.
The case looks like it's too long for the chamber.
Is he using 22WMR ammo by mistake?
Has the box been kept?
That will help in this identification.
Might be a possible reason for the extraction difficulties.
The case looks like it's jamming in the rifling and being mashed about when loaded by the action.
My 2c worth.

22 mag won't go into battery

Originally Posted by WallyR

No expert as are some here - but I have a question.
The case looks like it's too long for the chamber.
Is he using 22WMR ammo by mistake?
Has the box been kept?
That will help in this identification.
Might be a possible reason for the extraction difficulties.
The case looks like it's jamming in the rifling and being mashed about when loaded by the action.
My 2c worth.

Either that or its not recoiling far enough to eject and the empty is being reloaded at a angle as the bolt trys to go back into battery. Happens in my 10/22 running subs if its not cleaned every 200 rounds.

Originally Posted by Marty Henry

Either that or its not recoiling far enough to eject and the empty is being reloaded at a angle as the bolt trys to go back into battery. Happens in my 10/22 running subs if its not cleaned every 200 rounds.

That is what it looks like from the photo.

Originally Posted by Marty Henry

Either that or its not recoiling far enough to eject and the empty is being reloaded at a angle as the bolt trys to go back into battery. Happens in my 10/22 running subs if its not cleaned every 200 rounds.

Had same issue with my 10/22....

Originally Posted by WallyR

No expert as are some here - but I have a question.
The case looks like it's too long for the chamber.
Is he using 22WMR ammo by mistake?
Has the box been kept?
That will help in this identification.
Might be a possible reason for the extraction difficulties.
The case looks like it's jamming in the rifling and being mashed about when loaded by the action.
My 2c worth.

He's currently using Sub-Sonic - 22 LR HP - 1050 FPS - 40 grain

And before that he used Stinger - 22 LR - 1640 FPS - 32 grain

Originally Posted by sapphire

He's currently using Sub-Sonic - 22 LR HP - 1050 FPS - 40 grain

And before that he used Stinger - 22 LR - 1640 FPS - 32 grain

Has he tried the Stinger again?
Also does the bolt latch in the open/back position after the last round in the mag is fired?

Originally Posted by zimmer

Has he tried the Stinger again?
Also does the bolt latch in the open/back position after the last round in the mag is fired?

He's dropped it off to the gunsmith so I'll guess we'll find out what the issue was. Will share on here once I know.

For now he's gone and bought a new gun lol males...