My JW-15 is 15”. Pretty sure 795 n HMR are 15” as well. Reading somewhere that number is a bit of a sweet spot.
Sent from my iPhone using Tapatalk
Not a silly suggestion, but the fore end is short and doing that would change the balance point.
What I have just done is to take the PN 12 pipe off and heat slipped a 150mm long piece of PN 10 Red Stripe PE pipe 50 mm over the el-cheapo suppressor leaving 100 mm pipe forward ( this is a very thin walled high density PE pipe. I then slipped a de-capped shotgun shell (with a few wraps of tape around it to centralise) into the PN 10 pipe. I had drilled the primer pocket out to match the suppressor hole. Taped the whole lot with some super strong Nopi tape. Result - much quieter 22 at no cost, point of zero and groups unaffected. All components plastic, so if something goes wrong it wont end in disaster.
I have a Chiappa Little Badger, it has a 16.5" barrel, with a DPT 3 baffle suppressor. I run CCI Subs and CCI Quiets through it.
With the Quiets all you hear is the click of the trigger then the impact. I have shot a few hares with them and they knocked them over solidly.
What kind of range are the Quiets accurate to?
Chopped my old JW15 down to 14" about 6 yrs ago,accurate little shooter with subs out to 70yds.
Ammo package should show info about barrel length in order to achieve the max velocity. Believe should be 20”
Bookmarks