223 supressor

I have purchased a 223 off a forum member for a mate and he wants it supressed
So looking at the dpt overbarrel 24-6mm or the Gunworks spartan 223
the DPT is 50 dollars dearer.
Any opinions on what is best

Also the barrel thread is by gunworks at 1/2x20 will both of these supressors just screw straight on or is it more complicated that that ?
Thanks,

You specify the thread you want when you buy the suppressor.
I have both Gunworks and DPT.
Both good, but the DPT's better IMHO. :thumbsup:

Also have alook at MAE cans as well , very well made SS cans .

+1 DPT, and you can buy more baffles if you want to make it quieter. V light in weight too.

I'm also in the market for a can for my AR, and so far the response to my enquiries has be been heavily in favour of a DPT. Had a play with one the other day and the extra baffle setup is very neat.

Thanks for the replies
If i go DPT Will the supressor screw straight on without anything extra?

Sure will.
Buy a 'thread protector' for when you don't have the suppressor mounted.
$10 on Trademe.

Hang about. If its a DPT over-barrel, doesn't it need the back bush sized?

Have a thread protector thanks frog
Yes Tahr , thats exactly what I'm talking baout
Is there anything else needed than to just screw it on
thanks.

I think I'll give Dpt a ring

The MAE Compact is fantastic, I have one on my 22-250, no bushing required and does a superb job, come in a bead blasted finish or black...

This is mine...

Attachment 46239

Quote:

---

Originally Posted by jakewire

Have a thread protector thanks frog
Yes Tahr , thats exactly what I'm talking baout
Is there anything else needed than to just screw it on
thanks.

I think I'll give Dpt a ring

---

Yeah ask Darren how far back from the shoulder his can sits then measure you're barrel diameter so he can size the bush without the rifle easy as have done it with his cans before

Cheers Camo will do that.

if you go DPT , I would do 2 things , one order a SS baffle , and two get a smith to put a SS thread insert into the back end of the can .

thanks.

The back bushing on the DPT doesn't really do anything, I used my DPT for about a year without it

Quote:

---

Originally Posted by ChrisF

if you go DPT , I would do 2 things , one order a SS baffle , and two get a smith to put a SS thread insert into the back end of the can .

---

Then you might as well order a Sonic 45, if you can find one. Basically a DPT with stainless inserts in the baffle

All done
fitted, sorted
Thanks.