Hey guys question about the above who can give me the OAL of
A loaded 162 amax to suit a t3 superpig setup etc
Cheers
Printable View
Hey guys question about the above who can give me the OAL of
A loaded 162 amax to suit a t3 superpig setup etc
Cheers
Are you working up a load??Quote:
Originally Posted by camo wsm
Sent from my E5823 using Tapatalk
No just thinking of a new project and seeing what bits are neededQuote:
Originally Posted by HNTMAD
Oh ok, so how does OAL of a loaded cartridge come into it??
Sent from my E5823 using Tapatalk
Mag lengthQuote:
Originally Posted by HNTMAD
Maybe he's trying to see if it will fit in a proper gun rather than a T3[emoji13]
Sent from my iPhone using Tapatalk
He talking T3 so shouldn't be an issue?? Maybe I am missing something??
Sent from my E5823 using Tapatalk
Has anyone done one on a short action rem? Extended mag box or not?Quote:
Originally Posted by BRADS
some one was selling one last year on this forum or the other one based off Rem mountain rifle, they should be able to comment.
Greg Duley did a 25/284 on a short action. Case length will be the same, but loaded round length will be longer for 284 I imagine.
I think the longest you will get a Rem 700 SA magazine is 3.150" You can't get a mag box that long though, you will need to cut and weld a long action one to get that length. Greg Duley talks about in his 7mm Fatmax article in the dec 2012/jan 2013 issue 32
Craigc has. PM him.Quote:
Originally Posted by camo wsm
I had a 6.5x284 with wyatt extended mag and bottom milled out. Still wasn't long enough. Even for single feeding it would hit the top of the action on extraction
Sent from my SAMSUNG-SM-G870A using Tapatalk
Bugger might have to reconsider my plan :D
You know a saum will throw a 162 amax at 3080fps with 68g of 2217Quote:
Originally Posted by camo wsm
And fit the little mag box :)
MMMMM Titanium Saum :thumbsup:Quote:
Originally Posted by 7mmsaum
That's what I've been telling him[emoji13]
Sent from my iPhone using Tapatalk
Got my T3 284 OAL with 162 Amax at 77mm Chamber measured 77.4 mm 316 reamer
My tikka .284 has oal of 80 mm use the L mag and bolt stop
Yep, easy as. Call Scott Trail at SSRNZ.Quote:
Originally Posted by camo wsm
Does the double stack rem mag feed the 284 alright mate? Robbie Tiffen told me a couple of years ago that id struggle to get it too when i was looking at doing a 700 284. Im picking it works fine with a bit of tweaking.Quote:
Originally Posted by craigc
The 284 can be loaded to fit into a short action, but you end up losing case capacity and the ability to seat close to lands which may limit your accuracy potential.
Life would be easier if you can just use a long action.