Thread: 6.5 06

Turns out to all be very interesting.
So made a call to run with the 6.5 06 and some new dies arrived a couple of days ago. I was surprised how little gets trimmed off the .270 cases to form 6.5 06, and obviously the die reforms the neck to 6.5mm rather than .270in.
Which reminds me, better bump all that .270 gear I'm flicking on.
Now just have to find some load data using 143gr ELD X and 2209 or 2213.............any ideas??

Originally Posted by Bos

Turns out to all be very interesting.
So made a call to run with the 6.5 06 and some new dies arrived a couple of days ago. I was surprised how little gets trimmed off the .270 cases to form 6.5 06, and obviously the die reforms the neck to 6.5mm rather than .270in.
Which reminds me, better bump all that .270 gear I'm flicking on.
Now just have to find some load data using 143gr ELD X and 2209 or 2213.............any ideas??

how long is your barrel 2213 might be to slow, you can use 25/06 or 270 brass

22 Inch barrel and with a compact suppressor it effectively gives me 24 inchs
Anyone got any starting load weights??

woohoo...bingo...got the good stuff in adi manual nov 2004
6.5/06 24" barrel
142 grn projectile....AR2213sc START 45GRNS 2559FPS 50,000PSI
MAXIMUM load 50.3 grns AR2213sc 2795FPS 62,900 PSI
shit thats hot????
so thats projectile tiny bit lighter
so
160grn projectile46grn start 50grn max AR2213sc
129grnprojectlie 47grn start 51 grn max AR2213sc
120grn projectile 48grn start 52.5grns max AR2213sc

you should be able to suss it from there?????

Originally Posted by Micky Duck

woohoo...bingo...got the good stuff in adi manual nov 2004
6.5/06 24" barrel
142 grn projectile....AR2213sc START 45GRNS 2559FPS 50,000PSI
MAXIMUM load 50.3 grns AR2213sc 2795FPS 62,900 PSI
shit thats hot????
so thats projectile tiny bit lighter
so
160grn projectile46grn start 50grn max AR2213sc
129grnprojectlie 47grn start 51 grn max AR2213sc
120grn projectile 48grn start 52.5grns max AR2213sc

you should be able to suss it from there?????

Just out of interest, my 2013 copy says exactly the same.

2217 loads there too...much fuller case
142 grn projectile AR2217 49grns start 2555fps 49800psi maximum 55.0C 2816fps 63,300psi so hot hot hot
hope that enough to get you going bud.

Originally Posted by Bos

22 Inch barrel and with a compact suppressor it effectively gives me 24 inchs
Anyone got any starting load weights??

you should get away with 2213sc, but compare the load density and muzzle velocity 2209 might be more economical. 2208 start around 41.5 - 42gr 2213sc start around 44gr.

Originally Posted by mucko

you should get away with 2213sc, but compare the load density and muzzle velocity 2209 might be more economical. 2209 start around 41.5 - 42gr 2213sc start around 44gr.Attachment 150123

should of said 2209 not 2208. the shorter the barrel the faster the powder.