6.5 cal addicts

6.5 PRC ..... made in China ?:ORLY:

Quote:

---

Originally Posted by Kiwi Greg

Not necessarily, I asked the same question & was told the metal is hard & kinda "flaky" (which makes it a bitch to ream) this means bits can possibly flake off the lands & bore.

---

Does it mean that it might not do a good job on the chamber or will damage tools?

Quote:

---

Originally Posted by blair993

Does it mean that it might not do a good job on the chamber or will damage tools?

---

Both, rings in the chamber are common

Quote:

---

Originally Posted by muzr257

6.5x55AI 147 ELDM out of a 28inch criterion 3048fps - by changing the seating depth from 85 thou to 15 thou I get 3085fps. And this isn't at max pressure.
RL23 is the powder im using. 3000fps was the goal and im past that from the start really.

---

@muzr257 I think I need pics and more info on said firearm...... :)

I’m at 2790 with 140 amaxs with the Swede and it is a real tight group, consistent and I can actually hit what I want to. The issue is, I only have a few hundred amaxs left.... and I have a itch for something new......

Quote:

---

Originally Posted by Beaker

@muzr257 I think I need pics and more info on said firearm...... :)

I’m at 2790 with 140 amaxs with the Swede and it is a real tight group, consistent and I can actually hit what I want to. The issue is, I only have a few hundred amaxs left.... and I have a itch for something new......

---

Its too shiny for cameras even with no flash on its like its got built in anti paparazzi filters on it.