Thread: 6.5 options??

Originally Posted by leathel

80mm OAL is a lot for a short action..mmm My 6.5x6mmRemAI is 79mm maybee I could use a short action to build a lighter one

In my old Mauser action it gets the 140 going over 3K with a 25" tube without to much issue...Be nice to do it in a modern action ... Need to sorce some better brass first...Norma do cases, Must find some

its a squeeze at 82mm you have to mill the front an rear a fair bit an to get the bullet to unload if unfirerd is a pain have to pull it back then push it forward again an there not much left of the bolt stop but it can go that long.

doing a 7mm wsm at moment that will have long throat for the 180gr so will post photos of the build where is milled etc

Originally Posted by tui_man2

its a squeeze at 82mm you have to mill the front an rear a fair bit an to get the bullet to unload if unfirerd is a pain have to pull it back then push it forward again an there not much left of the bolt stop but it can go that long.

doing a 7mm wsm at moment that will have long throat for the 180gr so will post photos of the build where is milled etc

Look forward to the thread... Be a while before I am ready. Got to finish other gear first