6.5 PRC in Tikka T3X lite or Bergara B14 Extreme Hunter

Quote:

---

Originally Posted by Kelton

I see three inches would be more than long enough wouldnt it?

---

That's what she said :XD: should be plenty, I haven't measured the jump or anything.

Quote:

---

Originally Posted by Rated M for Magnum

It's like a WSM mag I think but it looks they made a specific mag for it, even says 6.5 PRC on the side.

Attachment 214559

That's a 147 ELD-M seated out to 3 inches.

Attachment 214560

And here's a 7mm rem mag case in it.

Attachment 214561

---

Yeah they have done. A medium action length for the short mags. If you ended up needing more space you can just get a long action mag and a long action bolt stop.

Quote:

---

Originally Posted by Rated M for Magnum

Update time, had the rifle threaded and shortened to 20 inches, suppressor fitted, looks great, points well, balances nicely, very happy with all that.

Needed zeroing again with all the changes so I got out for a bit of 100 yards target, chronicgraph action and validation today.

Now I have been told that the Norma Bondstrike ammo was slow, now brace yourself, through a 20 inch barrel they are going an average of 2520fps. Yes that's right, 2520 said the chroni, I thought surely they're not that slow :wtfsmilie:

They are that slow. All good though, factory ammo and all that. What I can say is they are accurate and consistent which is good. Running the numbers through strelok I've still got 1000 foot pounds at 600 yards at 1777fps. They handled the wind very well, it was gisty and swirling to probably 15mph and I hit the clump of dirt I was aiming at at 620 yards twice so really can't complain there.

---

I chronod some Norma and hornady 143 out of my new 22 inch suppressed custom today. The Norma were doing 2700 on the button. Shot well enough printing between 3/4 of an inch and an inch. Very consistent though ex over 5 rounds was 7fps. Pretty impressive.

The hornady chronod much faster at around 2830. Tighter groups in my gun printing 1/2 to 3/4 moa but a larger es of around 30.

If it prints close enough to either berger 140 vld hunters or hornady 147 eld m in hand load development ill probably use it for an up close load.

I see the 143 Norma projectiles are available but at a very stonch price, heard good terminal reviews on them @2950

Its weird that the Norma ammo is so pedestrian - Ive been shooting Norma 130 gn 6.5x284 target ammo and it honks, over 3100fps from a 24". You'd think that they'd be similar given they are ballistically ide tical . . .

Quite a big difference between the two bullet weights there @Tentman even in published load data.


Nosler list their 130 weight bullets doing 3200 fps out of the PRC with H1000 (2217) and down at 3030fps with a 140 weight bullet. That's from a 26 inch barrel mind you.

With my first lot of reloads I'm back up to 2770fps with the 147 ELD-M, plenty of bang flop out a long way. I think there is also an advantage of running a custom barrel in your case, excited to see what you end up running in yours.