Thread: 7mm mag to a 6.5prc?

Originally Posted by Yesmate

loading like for like re powders,projectiles the prc will have it all day over the .260 or creed.different calibre different Load ingredients is not a comparison.Rl26 is not readily available,18"PRCs doing a shade over 2900 with 156 is talked about on some other sites weather you believe that or not, is far superior to what a creed or .260 will do.
What does your 18" .260 do with a 147or 156?

Reloading speeds are equivalent to talking about appendage size. Everyone is up for a boast until an accurate measuring device comes out.

Hornady have said that some people claim 6.5 CM loads that they have not been able to replicate, unless using the 6.5 PRC.

Either someone has a broken chrono or...

Don't get why abusing your equipement to dangerous pressures is some sort of boast?

Originally Posted by caberslash

Reloading speeds are equivalent to talking about appendage size. Everyone is up for a boast until an accurate measuring device comes out.

Hornady have said that some people claim 6.5 CM loads that they have not been able to replicate, unless using the 6.5 PRC.

Either someone has a broken chrono or...

Don't get why abusing your equipement to dangerous pressures is some sort of boast?

agree 100%.wouldnt believe any thing to be fair, not that people are lying but as you said differences in cronos,its like car dynos they all read/calibrated different.hornady claims are wildly over rated on there precision hunter lines in prc.if you can get just above box speeds with hand loads your going good as I heard they got those speeds with rl26 or the equvilent powder they used to use.

Originally Posted by caberslash

Reloading speeds are equivalent to talking about appendage size. Everyone is up for a boast until an accurate measuring device comes out.

Hornady have said that some people claim 6.5 CM loads that they have not been able to replicate, unless using the 6.5 PRC.

Either someone has a broken chrono or...

Don't get why abusing your equipement to dangerous pressures is some sort of boast?

I also don't get the obsession with chopping barrels. It reminds me of the performance car scene with people lowering their cars. Surely if you don't chop a barrel you use less powder to achieve the same speeds.
My 22" Creedmoor with over barrel suppressor is a pain in the supplejack, but I'm betting losing 4" would give me marginally less annoyance for decreased performance.
I'll put up with a bit more supplejack tangling and a few more grams to carry to retain performance.

Sent from my SM-G973U using Tapatalk

Originally Posted by Eat Meater

I also don't get the obsession with chopping barrels. It reminds me of the performance car scene with people lowering their cars. Surely if you don't chop a barrel you use less powder to achieve the same speeds.
My 22" Creedmoor with over barrel suppressor is a pain in the supplejack, but I'm betting losing 4" would give me marginally less annoyance for decreased performance.
I'll put up with a bit more supplejack tangling and a few more grams to carry to retain performance.

Sent from my SM-G973U using Tapatalk

Or use bullets that work across speed ranges.

PRS has shown that shooting good (higher BC) bullets between 2650-2900 fps is more than adequate, and they run 24-26"+ barrels with little to no taper in order to maximise rifle weight and optimise balance point.

It's quite easy to make a decision on rifle performance, based on the bullet(s) that you want to use. Determine minimum speed for expansion, your acceptable degree of wind-drift uncertainty, and the potential limits of your rifle and bullet combo are revealed. Brian Litz's TOPGUN theory of accuracy has also proven that rifle weight is a determining factor in 'accuracy' when shooting under field conditions. With the same bullet and cartridge, a 28lb rifle with out-shoot and 18lb one which will in turn out shoot an 8lb one.

Don't get the guys who need MAGNUM (whether in the cartridge name or not) for shooting deer within 300 meters or less. The humble 243 will out-perform many of them with dilligent bullet choice.

A 16" rifle is very useful though, just need to know the limits of the setup. I enjoy shooting deer and seeing them tip over in rapid fashion, not going to look for them in the dark. My 7RM with 180 ELDM will confidently tip over any wild animal where I am, issue is lugging it about and putting it into position vs. the handy 7mm08 or 243. Do you really need a 600m+ capable rifle for bush-hunting?