Has anybody got or had an 85 Finnlight in 7mm mag that they can tell me about.
Cheers.
Printable View
Has anybody got or had an 85 Finnlight in 7mm mag that they can tell me about.
Cheers.
What ya doin'?
Had a swap offer for my winchester 308 today, I have to front some cash but not as much as you would think, so would like to know about anybodies experience with one.
It's a little to much gun for him I suspect.
I would go for it just to re sell it, the problem with a finnlight magnum is that they are only 22" barrels and the 7mm rem mag is one of those calibres like the 25-06 that need 24" barrels to attain maximum performance,ideally for a rem mag 24-26". also as you've pointed out it being too much gun for the guy especially so being the calibre/model configuiration that it is. I have one question that needs answering before i give my suggestion as to what to do, do you own a 223 at the moment?
Finlight= shorter fluted barrel 24"3/8 in 7mm mag
85= integral dovetails eg one less thing to move/come loose
IMHO a nice shaped stock that is a good compromise between prone and offhand.
3 lug bolt head make of it what you will.
Semi controlled round feed
4 shot mag in 7mm mag
Nup dont got one but would like one. mines a hunter in .308win
Oh and an actual recoil pad that works unlike the tika
Fixed your comment for you. :DQuote:
Originally Posted by Rock river arms hunter
But you are right, it seems the calibre is too much for him. My .270 75 Finnlight has the even shorter 20 7/8" barrel and with hot loads kicks like a mule and isn't a quiet beast blast wise.
I'm not so sure about the 22" barrel. my 6.5 Finn is longer than that from the bolt face to the crown and the Sako web site give 7mm barrel length at 24 and 3/8ths'
And No I do not own a 223, will a 22 250 do.
Basically I was just asking if people thought the Finn was a good enough platform for the 7mm mag before I pushed him a little,I know he likes my Winchester as he's offered to buy it before.
There is an offer on the table and he is thinking about it.
For me, the recoil isn't a worry, but wondered if perhaps anyone had had any problems with that caliber in that rifle re accuracy etc.
cheers.
Sakos dont have problems re accuracy in any caliber. (if properly cared for of course)Quote:
Originally Posted by jakewire
Yip, your more than likely dead right Vietnamcam.
Will just wait and see if I've offered him enough ontop.
Ask 7mmSAUM I'm pretty sure has one, and Im pretty sure he shoots it without a brake or suppressor so it may be a perceived problem the other guy has. Andrew sounds pretty happy with his. I believe his is the newer ST version. If you have a use for a bigger gun (and not one for the 308) then it does sound sensible. As much as I dislike Sako's I doubt it would not be an above average shooter.
Very nice rifles.
Great to have just touch loads all fit in the magazine, even 180 bergers. So easy to carry and shoot, they fit me like a glove, just like the hunter stocks on the 75's.
I have shot plenty of Sika with it now, had a bit of fun smacking half MOA rocks in zero wind at 1120yrds again last weekend.
I have also shot it from one skidder site to another in Te Awahonunui in what I thought was zero wind at 1200yrds, and was very pleased to keep 8 shots out of ten under MOA.
No problem doing under MOA groups at that range, with the right ammo.
These are all old pics now
85 ST (soft touch)
http://i254.photobucket.com/albums/h...m/DSCF2675.jpg
http://i254.photobucket.com/albums/h...m/DSCF2592.jpg
http://i254.photobucket.com/albums/h...m/DSCF2048.jpg
http://i254.photobucket.com/albums/h...m/DSCF2059.jpg
http://i254.photobucket.com/albums/h...m/DSCF2235.jpg
Model 75 7mm08, great when reamed to saum:thumbsup:
http://i254.photobucket.com/albums/h...m/DSCF2076.jpg
http://i254.photobucket.com/albums/h...m/DSCF2289.jpg
http://i254.photobucket.com/albums/h...m/DSCF2595.jpg
Thanks guys,
I bought the Winchester because it was in the shop at the same time I was, and surprisingly it shoots well and has a nice walnut stock, however I run a 6.5x55 so caliber wise it's redundant.
I'll give him a couple of days to mull over my cash then maybe push abit.
I don't know about needing 24" in a Rem Mag, in the one I loaded for we got 3100+ fps with the 162 amax without any problem, I felt it did slightly better then the SAUM in a 22" barrel and do you need any more speed than what we got? most dont shoot further than the energy at that speed :PQuote:
Originally Posted by Rock river arms hunter
and that rifle was only 6.5ld all up and the recoil was shootable..... be nicer to shoot with a brake though;)
Ok not needing but of Critical importance then..... unless its a 308 or 223/556 or any other calibre that was orginally designed for shorter barrels then thats fine but a rem mag most definetly does, ring up most gunsmiths and they will tell you that. I'd rather take a rem mag over a 308 for about the same amount of recoil any dayQuote:
Originally Posted by leathel
KiwiGreg should have the brake you want !Quote:
Originally Posted by leathel
That 22 inch rem mag sounds like the ideal NZ hunting rifle, actually anything pushing a 7mm A-Max at 2900fps+ is ideal.:thumbsup:
Ebay.com had a set of Redding 6.5 Rem Mag dies going cheap......
YOU'RE NOT GETTING THE MOST OUT OF YOUR CALIBRE WITHOUT A 30 INCH BARREL BECAUSE YOU COULD GET EVER SO SLIGHTLY MORE VELOCITY WHICH GIVES YOU A REAL, OBSERVABLE DIFFERENCE IN THE REAL WORLD, HONEST.Quote:
Originally Posted by Tussock
(I'll stick with lighter and shorter and deal with losing that 34 feet per second.)
Gimp what your phone number, trying to get ahold of you.
And a 7mm Remington Magnum in a short barrel is a .280 with lots of muzzle blast and a nasty kick.