Advice / Ideas on upgrading a Ruger 10/22

Having problems with a Ruger 10-22 I own so I've decided to give it some love and get some upgrades.

It shoots CCI subs accurately, not as accurate as my CZ452 but it shoots accurately enough however it keeps jamming with subs especially CCI so i'm wondering if there's a minor alteration that can be done, someone has suggested taking 2.5 turns off the recoil spring?

I'd like to put on a new stock as the plastic fantastic which is already on it doesn't give me enough comb check so I'd like to here from guys who have either a Hogue or a Magpul X-22 stock they have on their rifles.

Barrels... I might be persuaded to upgrade the barrel but not wanting to go bull barrel as I want to keep this as a light hunting rifle.

Trigger... The trigger is quite heavy... any modifications that can be done to lighten it or possible replacement?

As for optics, I was running it with a Bushnell red dot but recently replaced it with a Vector Optics 1-5 scope which has been awesome.

https://i.ibb.co/f436Msr/IMG-6283.jpg

https://i.ibb.co/nL11Ytt/IMG-6284.jpg

https://i.ibb.co/vJkR5Vz/IMG-6286.jpg

https://i.ibb.co/jZjRzdt/IMG-6285.jpg

go get a trigger job done, makes a world of difference

I have recently gone diwn the ruger path too, I have the full over barrel suppressed version, it shoots cci subs very well, I scored a mdt chassis for it on trademe for dirt cheep so I'll throw it in that when it arrives, as far as jamming, they do need to be kept clean as the build up a lot of gunk in the action and mag, I clean mine with crc longlife and it goes good.
You can polish the inside of the reciever and the bolt, before you go about cutting springs etc and foing anything irreversible.
Apparently you can also polish bits on the trigger to help make the trigger crisper.
I'll see if I can find the youtube vid I saw on it.
Don't give up on the cci subs they do shoot and cycle well.

This guy waffles on a bit and the camera work is average but some good tips
https://youtu.be/vOIuTh38Bls

the marlin upgrade is a money well spent :thumbsup:

I second the polishing. I have a Webley and Scott X22, direct copy of 10/22. Polished the bolt and a bit of the inside of the receiver. As has been started, it does need to be cleaned due to the amount of gunk that builds up. I put the volquartsen drop in hammer kit in mine, along with the trigger tune up springs. No creep at all on the trigger and it breaks like glass

Try the ruger BX trigger a very good upgrade

Talk to @gundoc

He sorted mine. :-)

Check out the 10/22 thread on this forum, lots of good ideas on there.

Trigger job is #1 priority... and the hogue stock is so much nicer than the standard stock.

Quote:

---

Originally Posted by planenutz

Check out the 10/22 thread on this forum, lots of good ideas on there.

Trigger job is #1 priority... and the hogue stock is so much nicer than the standard stock.

---

Got a link ? Tried searching 10/22 and for some reason it came up no matches ?

Kidd Kidd and more Kidd till you’re happy with it
www.coolguyguns.com

@dannyb

https://www.nzhuntingandshooting.co....cations-31974/

:)

Do the stock change. I gave up on my plastic 10/22 for this reason. Shot like arse. The wood stocked ones I have used shot acceptably. They are a true hack around carbine, accuracy is not the primary selling point.

Best upgrade for accuracy I have seen on a 10/22 is put >20,000 rounds through it. The really old ones seem to shoot very well.

polymer buffer is worth the effort. stops steel on steel hitting

+1 on trigger

if you want to go down the kidd path just buy a kidd no point buying a Toyota and trying to make it a rolls Royce id just shoot it and see if the potential is there then id do trigger and sights after all its just a knock around rabbit gun not a f class rig so reliability and accuracy is what you want it doesn't need blingy shit all over it

Quote:

---

Originally Posted by gonetropo

polymer buffer is worth the effort. stops steel on steel hitting

---

yup. Richard Wilhelm told me years ago it saved your scope.

Quote:

---

Originally Posted by northdude

if you want to go down the kidd path just buy a kidd no point buying a Toyota and trying to make it a rolls Royce id just shoot it and see if the potential is there then id do trigger and sights after all its just a knock around rabbit gun not a f class rig so reliability and accuracy is what you want it doesn't need blingy shit all over it

---

Coming from a guy thats owned a kid rifle I disagree
All you really need is the barrel and trigger which is about $1000 worth
A full kid is arround $1800 probably more now and not including a stock
So including a
$400 ish for a 2nd hand ruger if you don’t already have one
It’s only costing 1400 imo you are not getting much advantage from the kidd working parts imo

Age had a ruger with kidd barrel and trigger
I had a full kidd rifle he was at no disadvantage to me
His worked just aswell and just as accurate

Quote:

---

Originally Posted by rambo-6mmrem

Coming from a guy thats owned a kid rifle I disagree
All you really need is the barrel and trigger which is about $1000 worth
A full kid is arround $1800 probably more now and not including a stock
So including a
$400 ish for a 2nd hand ruger if you don’t already have one
It’s only costing 1400 imo you are not getting much advantage from the kidd working parts imo

Age had a ruger with kidd barrel and trigger
I had a full kidd rifle he was at no disadvantage to me
His worked just aswell and just as accurate

---

After reading some of gundocs info I would suggest you don't even need that, apparently a trigger job, permanently fitting the barrel and a bit of polishing the bolt and reciever will have it shooting extremely well.
Don't get me wrong I'm a slut for customisation and have some asthetic enhancements planned for mine but I won't be buying any fancy barrels or recievers etc till I've tried the above.
If it will shoot half inch @50yds I'll be bloody stoked, infact it msy well be close to that now with nothing done. I haven't tested it on paper due to time constraints but a standing group on a fence post @40yards 10 sjots as fadt as I could pull the trigger produced a fist sized group with almost no effort.
Can't wait to see what it will do with a few tweaks.
Love my man lego

My R55 shot 1/4" at 50m consistently. I miss it but it was too much of a unicorn to ever be a practical rifle.

Curious to know how good the 10/22 shoots with all these mods?

Quote:

---

Originally Posted by rambo-6mmrem

Coming from a guy thats owned a kid rifle I disagree
All you really need is the barrel and trigger which is about $1000 worth
A full kid is arround $1800 probably more now and not including a stock
So including a
$400 ish for a 2nd hand ruger if you don’t already have one
It’s only costing 1400 imo you are not getting much advantage from the kidd working parts imo

Age had a ruger with kidd barrel and trigger
I had a full kidd rifle he was at no disadvantage to me
His worked just aswell and just as accurate

---

I bet you can get an accurate semi for half those prices you've quotedor under without having to do anything to it to get it to shoot well for rabbits I know mine cost well under that

If you keep the 1022 I'd go with what gundocs advice is

my gundoc built ruger 10/22 years back was 11mm 3 shot groups at 50m.
unfortunately i had to sell it to pay some urgent bills, but was a hell of a machine.
my slightly doctored 10/22 at present will shoot 18-20mm at 50m which is good enough for what i use it for.

TINCANBANDIT's Gunsmithing: Ruger 10/22 Cheap Tricks
some handy little tricks on here especially for the bolt. Doesn't mention anything about trimming springs

Quote:

---

Originally Posted by northdude

I bet you can get an accurate semi for half those prices you've quotedor under without having to do anything to it to get it to shoot well for rabbits I know mine cost well under that

---

Mate cant agree more I got my uncles rifle for him
When he 1st got his fal
That’s a factory 10-22 with a trigger job
And as others have said 1/2 inch at 50m is easily doable

But I think you’re confusing accurate with fuckkkkkkken accurate with a kidd you’re talking 1/4 inch at 50

You can modify a factory 10/22 trigger all you want but you won’t get it anywhere near a kidd trigger
I had my 2 stage kidd pulling at a crisp 6oz

And a 10/22 barrel isn’t going to out do a lothar walther match barrel which is what a kidd barrel is he gets them as blanks and doses all theMachining to them in the us

So yes you are perfectly correct you can accurize a 10/22 and get it pretty darn good but
You’re dreaming if you think it’s going to do anywhere near what a kidd can

Comes down to do you need fuckkkkkkken acccurate or will just accurate do
For the average shooter/hunter 1/2 inch at 50 is more than enough

But if you have the cash and you want something Special kidd is by far the way to to go

exactly but if your comparing apples with apples ……………………………..base ruger price with no mods vs anything else in the same price bracket the ruger isn't the head and shoulders above the rest ive got a basic ruger its accurate just. ive had a rem597 that was more accurate but not reliable out of the box but a few tweaks without dropping 1000 bucks on it it was a good rifle and I know they aren't a very good semi I also had a stirling semi that basic old thing could easily out shoot both of them no jams whatever ammo you wanted to feed it also had one of those Canadian Winchesters with the die cast mag forget what they are called that old thing was just as accurate as the rem and ruger havnt owned a marlin but Ive seen them in action and they would be my choise for a new modern semi my current one is a walther but that's in the next price bracket up its the most accurate one ive shot behind the stirling of all things so in the same price bracket with no mods what are we talking