Looking at getting a Mountain Tactical trigger spring for my new rifle and wondering if they are any good. Already use a Yo Dave and they are a lot better than the standard factory spring but haven’t seen any for sale in a while.
Printable View
Looking at getting a Mountain Tactical trigger spring for my new rifle and wondering if they are any good. Already use a Yo Dave and they are a lot better than the standard factory spring but haven’t seen any for sale in a while.
Also used Yo Dave trigger springs Brno 2 & CZ 457 both with excellent results.
I have more tikka yodave springs due to arrive. should be next week all going well.
I find the springs from this pen cheap and very effective you get enough for 8 triggers for $3.50 .
I just done another CZ 457 and it came up at a very crisp 11 oz very consistent no slam fire no bump fire the spring is perfect diameter replacement for the original
Attachment 203915
I've used the larger spring from a BIC lighter. Fitted well in the trigger mechanism and produced a consistent, lighter trigger pull.
Just make sure you put this end in the trigger and the properly Factory finished off end of the spring goes towards your weight adjustment screw .
Attachment 203935
and I I must say that for a trigger that I did not hone the sear surfaces while it's not as good as my Jewel triggers but the average person would not pick them so crisp and clean.
c z really kicked a goal on these triggers they've gone from the worst trigger in a Rimfire to the best even better than my anschutz 1517DHB .
Just fitted a trigger spring from Gunsmoke in Oz for a Ruger this afternoon. Does what it says on the packet. Package got openned by Customs, but that may have been because it had a bipod in it as well.
Has anyone fitted a aftermarket spring to their howa 1500 or weatherby vanguard.
I am currently looking at aftermarket triggers and springs...
Yes, I've fitted a spring set from HVHA in aussie to my 1500 mini .223. Pretty easier to do if you're vaguely mechanical. Makes a huge improvement. I haven't measured before/after pull weight but I've got mine set at what I would consider 'sorted target rifle trigger'.Quote:
Originally Posted by Jusepy
I've got another set in transit for a friend's 1500.
Definitely worth the 29 aussie bucks.
edit: I've got the HACT trigger
https://highvelocityhuntingaustralia.com.au/
Yea recently installed a 1.5lb spring kit from this place. Arrived in about a week which is awesome.
They don’t come with spare e clips like the gunbloke ones so be careful with assembly.
They come in a range of weights. The 1.5lb I got feels a little heavier than advertised. I reckon if I got the 2lb spring I would have been pissed that I didn’t just stick with the factory one.
Quote:
Originally Posted by SPEARONZ
Did you need an import permit for the spring?
Na
I think you'll find that the pen springs are not extra special 'gunsmith approved' springs which cost 10x more.Quote:
Originally Posted by deye223
They might look the same, test the same and even come from the same factory and have the same SKU but they are definately not the same :ORLY:
I just run triggertech and Elftman, job done lol
