Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Ammo Direct DPT


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 27
Like Tree14Likes

Thread: Anyone have a hardys carbon barrel on their rifle? After info on break in procedure

  1. #1
    Member
    Join Date
    Jul 2019
    Location
    Tauranga
    Posts
    538

    Anyone have a hardys carbon barrel on their rifle? After info on break in procedure

    Hey guys, just after some info on the barrel break in procedure. Hardys gave me a booklet on how to break the barrel in but it seems pretty extensive.. after every shot they say to run about 30 patches through the things with about 3 different products... if you do this Over the break in process you’ll be there for days cleaning and using 100’s of patches? It’s not a comp rifle it’s just a 308 bush pig pretty much... 16.5” barrel, obviously I want it to shoot straight but can I just use like g96 and a few patches between each shot?

  2. #2
    Member
    Join Date
    Jul 2012
    Location
    Invervegas
    Posts
    5,210
    The gunsmith who fitted my Hardy barrel (not a carbon one to be fair) told me to "go shoot it".
    mikee likes this.

  3. #3
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,763
    My Hardy 300saum barrel (not carbon) shot great without any mucking around and after maybe 500 shots still does. Never coppers. I just gave it a real good scrub after the first few shots and that was it really apart from a Hoppes scrub every now and again. I do put a clean bore snake through it after each hunt.

  4. #4
    Member
    Join Date
    Oct 2013
    Location
    Ohaaki,Taupo
    Posts
    687
    As Tahr suggested I had a Carbon one cleaned 1,3,5 shots with carbon and copper removed then full clean maybe every 50. Never store wet use a pull through or dry patch.
    Moa Hunter likes this.

  5. #5
    Member
    Join Date
    Jul 2019
    Location
    Tauranga
    Posts
    538
    Quote Originally Posted by ariki View Post
    As Tahr suggested I had a Carbon one cleaned 1,3,5 shots with carbon and copper removed then full clean maybe every 50. Never store wet use a pull through or dry patch.
    Would you recommend using a copper and carbon remover specifically or will g96 work?

  6. #6
    Member outdoorlad's Avatar
    Join Date
    Dec 2011
    Location
    Christchurch
    Posts
    3,010
    My barrel copper fouls quiet badly and takes a lot to clean it out. I’m using KG products.

    Name:  3BD46CD3-B2EA-40FF-84CF-BCF02DF0B8E7.jpeg
Views: 708
Size:  25.6 KB
    7mmsaum and Moa Hunter like this.
    Shut up, get out & start pushing!

  7. #7
    Member Marty Henry's Avatar
    Join Date
    Oct 2014
    Location
    Tararua
    Posts
    7,088
    My thought is if it requires the process you describe it can't really be very good.
    Howa, savage, tikka, just go for it. Also I think more rifle barrels are ruined by over cleaning than anything else.

  8. #8
    Member
    Join Date
    Oct 2013
    Location
    Ohaaki,Taupo
    Posts
    687
    Talked to a sniper instructor from army and his exact words 6-8,000 rounds in 308 copper or carbon maybe every 500 rounds and by Christ he can shoot. So are we prematurely eating barrels out for the sake of barrel manufacturing??
    Steve123 likes this.

  9. #9
    Banned
    Join Date
    Mar 2015
    Location
    North Canterbury
    Posts
    5,462
    Look up 'Mark and Sam After work' on Barrel Break in. The definitive answer

  10. #10
    Member
    Join Date
    Jul 2012
    Location
    Invervegas
    Posts
    5,210
    Quote Originally Posted by ariki View Post
    Talked to a sniper instructor from army and his exact words 6-8,000 rounds in 308 copper or carbon maybe every 500 rounds and by Christ he can shoot. So are we prematurely eating barrels out for the sake of barrel manufacturing??
    Was talking at the range this arvo with a guy who still shoots TR with a sling, and is dammed good at it, gives the F Class boys a run for their money (even considering how the targets are scored differently).

    He shoots 308 exclusively, using two rifles with regular turns about. This allows him to verify any accuracy fall off. He has a barrel up to 12,000 rounds, although he usually has been changing them about 5000.

  11. #11
    Member
    Join Date
    May 2020
    Location
    Taupo
    Posts
    133
    Barrel running in is a load of shit. Go shoot it. I have had several custom barrels for both target shooting and hunting. I have a Hardy carbon fibre barrel. When he gave me the booklet I gave it back. Custom barrels are hand lapped in their finishing process, just shoot them. Years ago I did a lot of research into this subject....short answer again....just shoot it.
    Steve123 and dannyb like this.
    there are only two things guns fear
    rust and politicians

  12. #12
    Member
    Join Date
    May 2020
    Location
    Taupo
    Posts
    133
    always
    there are only two things guns fear
    rust and politicians

  13. #13
    Member
    Join Date
    May 2020
    Location
    Taupo
    Posts
    133
    My 7 rem mag used to do that. I lapped the barrel with bore paste....problem solved
    Moa Hunter likes this.
    there are only two things guns fear
    rust and politicians

  14. #14
    Member
    Join Date
    May 2020
    Location
    Taupo
    Posts
    133
    308/3006 calibre give one of the longest barrel life for a rifle. Barrel life depends on calibre, loads and how you look after them.
    there are only two things guns fear
    rust and politicians

  15. #15
    Member outdoorlad's Avatar
    Join Date
    Dec 2011
    Location
    Christchurch
    Posts
    3,010
    Quote Originally Posted by Taupohunter View Post
    My 7 rem mag used to do that. I lapped the barrel with bore paste....problem solved
    @Taupohunter I’ve lapped it twice with bore paste so far, full clean every 15-20rounds.
    Shut up, get out & start pushing!

 

 

Similar Threads

  1. Hardys Carbon fiber Bipod - Any thoughts?
    By Larskramer in forum Firearms, Optics and Accessories
    Replies: 35
    Last Post: 07-11-2019, 11:28 AM
  2. Air rifle hunting - Break Barrel or Under-lever??
    By Tentman in forum Varminting and Small Game Hunting
    Replies: 16
    Last Post: 02-07-2019, 10:12 PM
  3. Tikka bolt shroud & muzzle break info
    By Stefanhope in forum Firearms, Optics and Accessories
    Replies: 2
    Last Post: 09-12-2018, 11:42 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!