AR Photo Only Thread

[Nick-D]

@Kscott still playing around with it as I have decided to be a cheapskate and see if I can get some coated 220 lead numbers to shoot. This was 208 aMax's over about 9.5gr lil gun. Seemed to shoot pretty well and was super quiet. Didn't chrony though

[Nibblet]

I put a 3lb timney mine and after about 1k rounds started getting doubling. Took it back to the gunsmith and he said you need to clean this thing by flushing the trigger out with solvent. Carbon build up on the trigger sear had dropped the trigger weight to a measured 2.5lb which coupled with holding the gun loosely (i was shooting prone of a bipod uphill at rabbits) lead to the doubling. The amount of carbon blowing back into the action is much much worse on a suppressed ar and this is why the standard milspec trigger is six pounds.

Do you have an adjustable gas block though?

Still get dirty but nowhere near as bad

[rogers.270]

What gen is that NEA?

How can i tell?

[MassiveAttack]

Do you have an adjustable gas block though?

Still get dirty but nowhere near as bad

Yes, got one.

[Lux]

Hi all just put this together in the last month core 15 cost me 1900 all up happy with my first ar, sika show was awsome not for the pocket tho haha cheers.

[Lux]

Sorry dumb upside down photo.

[res]

Sorry dumb upside down photo.

[Hunter_killer]

Hi all just put this together in the last month core 15 cost me 1900 all up happy with my first ar, sika show was awsome not for the pocket tho haha

Was so close to buying one of those 3T Stag ARs at the show for 2k with a couple of extras...
Glad I waited (against everything in me saying "just buy it") have the same stock as you (and cylinder) sitting at home, which will save some money when I decide to build one through my mate. How do you find the stock ergonomic wise? Hear they are a bitch to fit.

Is this a stock trigger and 1:9 twist barrel?

[SJD]

Hi.New to this site. Here's a couple of my ARs. Top one is Bushmaster lower, aero upper, high standard 1/7 barrel with original phrobis m9 bayonet. Bottom one is Aero upper and lower, DPMS 1/9 barrel and trijicon TA31 with rmr.

[dogmatix]

Nice one, welcome to the forum @SJD.

[Lux]

@Hunter_killer i bought it off a guy second hand never fired, iv put the rail and scope and mount on it i really like the stock only used the gun twice going to sight it in tomorrow with new scope ,ill get my ecat soon and save up for next sika show. Dont know how you didnt buy one i would've.
Is this a stock trigger and 1:9 twist barrel? yes

[Hunter_killer]

@Hunter_killer i bought it off a guy second hand never fired, iv put the rail and scope and mount on it i really like the stock only used the gun twice going to sight it in tomorrow with new scope ,ill get my ecat soon and save up for next sika show. Dont know how you didnt buy one i would've.
Is this a stock trigger and 1:9 twist barrel? yes

Yeah I know right, CCard was burning a hole in my pocket! After conference with a mate who can build them, who said he would buy it..(which didn't help) but put a few things in perspective for me, and the wife (just off the back of our wedding) - although keen on the idea, helped me cool the jets a bit...I somehow convinced myself to put it off until xmas/next year. TBH, I wanted/needed to buy a range finder (vortex 1500 @ $800) otherwise I probably still would of done it lol. :/

And yeah the 1:9 with stock trigger. They guy would of chucked in $175 polymer sights, an extra mag and an AR tool at $2k as well. Luckily I can still get 10% off through the company and I'm sure they will honer their deal later on if I don't find/build a better one. (Depending on import/exchange rate)

[Glycerine]

decided to re-dress my 300blk and 9mm and add different optics

300blk, dressed in black hogue, accessorised with Aero mount and Primary Arms 1-4x

9mm, dressed in OD magpul, accessorised with UTG riser and bushnell TRS-25

[stumpy]

How can i tell?

going off how the hand guard is attached its a gen 1 .... all gen 1 clamp on the side like yours , later gen 2 and on tighten up at the bottom

[res]

decided to re-dress my 300blk and 9mm and add different optics

300blk, dressed in black hogue, accessorised with Aero mount and Primary Arms 1-4x

9mm, dressed in OD magpul, accessorised with UTG riser and bushnell TRS-25

Attachment 56942

Attachment 56943

I sometimes wonder what the practical point of a 9mm ar is when you have a 300blk, I also own both and font the only advantage the 9mm is is not having to make cases and slightly less fussy reloading