Printable View
@Hunter_killer i bought it off a guy second hand never fired, iv put the rail and scope and mount on it i really like the stock only used the gun twice going to sight it in tomorrow with new scope ,ill get my ecat soon and save up for next sika show. Dont know how you didnt buy one i would've. :D
Is this a stock trigger and 1:9 twist barrel? yes
Yeah I know right, CCard was burning a hole in my pocket! After conference with a mate who can build them, who said he would buy it..(which didn't help) but put a few things in perspective for me, and the wife (just off the back of our wedding) - although keen on the idea, helped me cool the jets a bit...I somehow convinced myself to put it off until xmas/next year. TBH, I wanted/needed to buy a range finder (vortex 1500 @ $800) otherwise I probably still would of done it lol. :/Quote:
Originally Posted by Lux
And yeah the 1:9 with stock trigger. They guy would of chucked in $175 polymer sights, an extra mag and an AR tool at $2k as well. Luckily I can still get 10% off through the company and I'm sure they will honer their deal later on if I don't find/build a better one. (Depending on import/exchange rate)
decided to re-dress my 300blk and 9mm and add different optics
300blk, dressed in black hogue, accessorised with Aero mount and Primary Arms 1-4x
9mm, dressed in OD magpul, accessorised with UTG riser and bushnell TRS-25
Attachment 56942
Attachment 56943
going off how the hand guard is attached its a gen 1 .... all gen 1 clamp on the side like yours , later gen 2 and on tighten up at the bottomQuote:
Originally Posted by rogers.270
I sometimes wonder what the practical point of a 9mm ar is when you have a 300blk, I also own both and font the only advantage the 9mm is is not having to make cases and slightly less fussy reloadingQuote:
Originally Posted by Glycerine
Cheaper to shoot
Barely, my cast 300 rounds cost hardly any more than my cast 9mm rounds.Quote:
Originally Posted by Beavis
there probably isn't one, I only built it.. because I can & why not, and most importantly I wanted one. :thumbsup:Quote:
Originally Posted by res
Can't fault that logic at all! I love mine but struggle to justify why
If i looked at all my guns and tried to justify each one, beyond "I wanted it" I probably only have reason for two
That may be so, but if you shoot factory not so much.Quote:
Originally Posted by res
I really like the look of the Rfile Length A2.I find the open sights excellent.Is the factory clamshell handgard that much of the impairment to accuracy?Quote:
Originally Posted by SJD
Welcome to the forum!
AR's got a Christmas clean...
Attachment 61382
Just for fun I measured some of the rifles in this thread by overlaying them in a CAD program against a dimensionally accurate AR15 model. Giving me the ability to measure maximum overall length with a moderate to high degree of accuracy. Some just squeak over 762mm and others should probably never have their butt-stocks collapsed. A picture on the internet may not be proof of illegal activity, but remember if you have an MSSA endorsement, the Police can pop in for a visit unannounced at any reasonable time with their measuring tapes :pacman:
For some time police mesured E cats with stock extended, and the post dates of those pictures you talk of fit inside that timeframe.Quote:
Originally Posted by Recoil
As to e cat measured length, the polices opinion as to how one should be measured seems to be in flux and inconsistent with both how the law is written and with common sense , so much so that FOUNZ paid probably the most knowledgeable lawyer in NZ on arms law to write his legal opinion down so that it could be distributed, you can download a copy http://founz.co.nz/documents/CCF08122016_3.pdf and intill law is re written (not something the police do) or case law clarifies things (I think @gundoc was involved in such a case a number of years back) it's all a bit up in the air with each party's ideas seeming to hold as much legal weight as each other.
As of Friday I know of a shooter who was denied a import permit for a fixed stock for his rifle as police didn't deem his reason for import to be correct , his reason for import was that under the polices new opinion as to how to measure e cat firearms he could no longer have as folding stock on it-the rifle in question was only imported a few month back.
This makes me personally feel that either the old way as per Joe Greens letter or the FOUNZ document way is a defendable to have a firearm if you already had it in such a configuration
So in other words for the shooter you know, police denied it because they possibly have realized how much of a headache things might be for all E endorsed that fall in to this??Quote:
Originally Posted by res
Possibly, it really would open up a big bag of worms for them.Quote:
Originally Posted by Sasquatch
Eg as you don't need a fal for a pcp pistol but you do for a rifle and if they insist that a folding stock turns said rifle into a pistol then it undoes what police see as a very useful bit of law. And that just one of many cans of worms.
The police would probably prefer the way they were doing it over Nick Taylor's legal opinion of the way it should be.
Long story short, while I personally wouldn't create a firearm that could be affected by all this right now, I'm not rushing to change the ones I have that could be until there is more certainty.
Attachment 61451
CJA, fitted with bushmaster barrel, muzzle brake, harris bipod, atn x-sght II, also have the bushnell AR scope and a burris CQ scope that all clip on and off as needed. also a gunworks can.
Is that a ak brake?Quote:
Originally Posted by gonetropo
sure is (threaded for AR though)Quote:
Originally Posted by res
The CMMG .22LR upper and Spikes lower with Katipo stock.
Came 2nd hand with 15 round mag and MAE can.
Yes, the hand guard isn't level with the receiver, but not fussed, as it will wear a scope, not irons.
Attachment 61760
The Katipo stocks are pretty decent units for what you need to do for A cat.
http://i.imgur.com/DAcuKOE.jpg
Older Family Photo
http://i.imgur.com/HQZXpaD.jpg
http://i.imgur.com/9lFjD4a.jpg
http://i.imgur.com/XstqVIk.jpg
http://i.imgur.com/H9stezC.jpg
http://i.imgur.com/utgIrvJ.jpg
http://i.imgur.com/9ia5xQW.jpg
Then just for shits and giggles...
http://i.imgur.com/zBs2ZPK.jpg
Daewoo K2
http://i.imgur.com/A61FqxM.jpg
Serbian M90NP
http://i.imgur.com/ZUgRtI0.jpg
MSAR XM17-E4
They all run off AR mags.
;)
Its been far to long since someone added a AR pic,
so heres my latest... something a bit old school... Colt 723 clone,
built with a Colt C7 upper, and Aero Lower,
Attachment 71541
BeautifalQuote:
Originally Posted by Glycerine
Goddamn I love those BCM riflesQuote:
Originally Posted by 300_BLK
Attachment 71548
A bit of a work in progress here. Still need some Irons. The shitty light is getting replaced by a Surefire (on it's way). Need a better mount for the T1. Thinking of trying a magnifier.
@300_BLK how do you rate the Sig Bravo ACOG & where did you source it? Is it priced similarly to the Trijicons?
30 BRX upper
http://i1004.photobucket.com/albums/...psbtx3aqdi.jpg
338 BRX upper
http://i1004.photobucket.com/albums/...psaq3pfhgv.jpg
450 BM super upper
http://i1004.photobucket.com/albums/...psigczyluf.jpg
A little heavy with 20" barrels, but barrel length equals horsepower :)
what range was that shot at is that a good group for an ar maybe I'm expecting to much from mineQuote:
Originally Posted by 300_BLK
Hey @Sasquatch just reviewing it now for NZ Guns. Better FoV and eye relief than an ACOG. Awesome illumination and the BDC on the horseshoe dot is on out to 400m. Similar price too, maybe slightly cheaper. Hit up SR Marston's & Co in CHCH they are the agents.Quote:
Originally Posted by Sasquatch
@northdude It was a competition shoot at the end of a carbine class I attended. 3-100m for that target.
Do they import Sig rifles too?Quote:
Originally Posted by 300_BLK
The 338BRX is on the board :)
http://i1004.photobucket.com/albums/...pss7pk6c04.jpg
Might have to take the 450BM next
They have a 556 and 762 coming in @Macca.Quote:
Originally Posted by Macca
Very hard to get hold of in the past...
I'M NOT THE RIGHT MACCA!Quote:
Originally Posted by 300_BLK
I've been getting so many mentions instead of the other macca that you probably meant to tag haha
Attachment 71774
Aero precision Upper and lower
AIM NiB 9310 MPI Bolt Carrier Group
Mega Arms 14.5" barrel
Seeking precision adjustable gas block
Oceania Defence Samson Suppressor
Mid West Industries Gen 3 SS M Lock 9.25"
Aero Precision Mount
Leupold VX5HD 2-10x50 with firedot
Katipo Stock
2x Magpul mags
