AR Thread

[cambo]

Are the NEA milspec so bits are interchangeable with other brands?

[foxhound]

Unsure of that cambo you could ask ken at nzar15, or someone else on here will know.
NEA have a range of uppers and a 300blk in the pipeline

[NZShoota]

Be warned sometimes one upper is not enough



From top

High Standard upper and parts kit, CMMG .22 16" Barrel, Magpul Carbine MOE guards
High Standard upper and parts kit, DPMS .223 1:9 16" Barrel KAC RAS, Trijicon TA01NSN
High Standard Upper and parts kit, S&J Hardware .223 1:7 14.5" Barrel, YHM Midlength FF Rail, JP Adj gas block, HRE Suppressor
High Standard Upper and parts kit, Trueflight .223 1:8 Ultramatch 18" Barrel, DD FF Rail, Badger Ordinance gas block, OPS Inc Brake, Leupold Mk4 2.8-8x32
Factory Colt SP1 Upper .223 1:12 20" Govt profile barrel
DPMS A2 upper and parts kit, Accuracy Speaks .223 1:8 Match barrel and FF handguard
Factory Bushmaster Upper, .223 1:9 20" HBar, KAC M5 RAS, Trijicon TA31RCO-A4
Factory CMMG .22LR 20" Govt Upper, KAC M5 RAS, Trijicon TA31F

[Kscott]

Be warned sometimes one upper is not enough

Attachment 4211

From top

High Standard upper and parts kit, CMMG .22 16" Barrel, Magpul Carbine MOE guards
High Standard upper and parts kit, DPMS .223 1:9 16" Barrel KAC RAS, Trijicon TA01NSN
High Standard Upper and parts kit, S&J Hardware .223 1:7 14.5" Barrel, YHM Midlength FF Rail, JP Adj gas block, HRE Suppressor
High Standard Upper and parts kit, Trueflight .223 1:8 Ultramatch 18" Barrel, DD FF Rail, Badger Ordinance gas block, OPS Inc Brake, Leupold Mk4 2.8-8x32
Factory Colt SP1 Upper .223 1:12 20" Govt profile barrel
DPMS A2 upper and parts kit, Accuracy Speaks .223 1:8 Match barrel and FF handguard
Factory Bushmaster Upper, .223 1:9 20" HBar, KAC M5 RAS, Trijicon TA31RCO-A4
Factory CMMG .22LR 20" Govt Upper, KAC M5 RAS, Trijicon TA31F

Outstanding !!!!!

How do you find the CMMG unit ?

[NZShoota]

How do you find the CMMG unit ?

Very good. Way better than a drop in conversion kit. So far put about 600 rounds through the 16" and a couple hundred through the 20" with no malfuntions and thats just running standard velocity and some winchester subsonics with a standard milspec trigger. Accuracy is also a lot better than the conversion kits. The 20" is used as a cheap practise set up for service rifle hence the same configuration as my Bushmaster upper.

[faregame]

Does this mean you can say to the misses "yeah I only have 1 rifle"??

Be warned sometimes one upper is not enough

Attachment 4211

From top

High Standard upper and parts kit, CMMG .22 16" Barrel, Magpul Carbine MOE guards
High Standard upper and parts kit, DPMS .223 1:9 16" Barrel KAC RAS, Trijicon TA01NSN
High Standard Upper and parts kit, S&J Hardware .223 1:7 14.5" Barrel, YHM Midlength FF Rail, JP Adj gas block, HRE Suppressor
High Standard Upper and parts kit, Trueflight .223 1:8 Ultramatch 18" Barrel, DD FF Rail, Badger Ordinance gas block, OPS Inc Brake, Leupold Mk4 2.8-8x32
Factory Colt SP1 Upper .223 1:12 20" Govt profile barrel
DPMS A2 upper and parts kit, Accuracy Speaks .223 1:8 Match barrel and FF handguard
Factory Bushmaster Upper, .223 1:9 20" HBar, KAC M5 RAS, Trijicon TA31RCO-A4
Factory CMMG .22LR 20" Govt Upper, KAC M5 RAS, Trijicon TA31F

[cambo]

Does this mean you can say to the misses "yeah I only have 1 rifle"??

I like the way you think FG

[faregame]

yeah - keep em guessing - all black too

What lower, trigger do you use NZshoota?

[NZShoota]

What lower, trigger do you use NZshoota?

I've got Colt, Double Star, Bushmaster and DPMS lowers. As for triggers, Giessle two stage, Colt, DPMS, and Jard

[Digit]

Are the NEA milspec so bits are interchangeable with other brands?

Yes. The photo at the top of the thread shows various bits from Magpul, Samson and Ergo together. We sell a lot of separate uppers and lowers to customers for their own builds too. The NEA rail does need to be removed before swapping some uppers and lowers though - just 4 screws.

[mcche171]

Hi

Was wondering if anybody knew where i would be able to get a 10-12" barrell for my bushmaster. Looking at starting a new upper build project with a small lightweight rifle in mind. Have looked at the states but no way in hell can i get anything i want out. Any help or advice would be appreciated.

cheers

[steven]

target-shooting-23-12-2014-stag-mod4.pdf

The Barnaul stringed vertically, suggesting the projectiles are OK? but the powder charge is off? Tula shot all over the place. Both the Belmont ammo shot fine, ADI SMK shot very well but $2 a go v 55cents for the Belmont. Limitations is my eye sight I think, best I could shoot at was 50yds, I need to fit a scope.

[PERRISCICABA]

Attachment 32736

The Barnaul stringed vertically, suggesting the projectiles are OK? but the powder charge is off? Tula shot all over the place. Both the Belmont ammo shot fine, ADI SMK shot very well but $2 a go v 55cents for the Belmont. Limitations is my eye sight I think, best I could shoot at was 50yds, I need to fit a scope.

Hi everyone, hello there @steven,
So, I used American Eagle to break in my Stag model 6 and since I swap for Hornady 55gr sp brass cases and the accuracy at 100mts is as follow.
There are 3 shooters in the photo, first from left me, a friend and then my partner. My group is a 10 shots and the Middle is 5 and right(my partner) 3.





I think it is an option.
Cheers
Mac