Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

ZeroPak Darkness


User Tag List

Results 961 to 975 of 1022
Like Tree268Likes

Thread: AR Thread

Threaded View

cambo AR Thread 02-11-2012, 03:09 PM
compound Buy it in bits. I was just... 02-11-2012, 06:13 PM
cambo What did you get compound?... 02-11-2012, 06:23 PM
compound DPMS lower with RRA trigger... 02-11-2012, 06:34 PM
cambo Great cheers compound. All... 02-11-2012, 07:03 PM
mikee So Far Brownells, Have 3 x... 02-11-2012, 07:15 PM
cambo How did you get on getting... 02-11-2012, 08:51 PM
mikee Easy, Get your import permit... 02-11-2012, 09:27 PM
NZShoota FIRST Check with Brownells... 03-11-2012, 06:37 AM
mikee Good point, I check with... 03-11-2012, 09:25 AM
foxhound Purchased my first AR in sep... 03-11-2012, 12:40 PM
cambo Are the NEA milspec so bits... 03-11-2012, 01:38 PM
foxhound Unsure of that cambo you... 03-11-2012, 01:57 PM
NZShoota Be warned sometimes one upper... 04-11-2012, 09:31 AM
Kscott Outstanding !!!!! How do... 04-11-2012, 10:37 AM
NZShoota Very good. Way better than a... 04-11-2012, 02:32 PM
faregame Does this mean you can say to... 04-11-2012, 02:37 PM
Digit Yes. The photo at the top of... 04-11-2012, 09:23 AM
mcche171 Hi Was wondering if... 12-06-2013, 01:23 AM
steven AR15 ammo tests 05-01-2015, 01:58 PM
PERRISCICABA Hi everyone, hello there... 05-01-2015, 08:21 PM
cambo I think someone might have... 04-11-2012, 09:41 AM
NZShoota I'm starting to get over it :D 04-11-2012, 02:25 PM
Spanners Wheres the 9mm, 45, BLK,... 04-11-2012, 06:46 PM
NZShoota Sold the 9mm a few years... 05-11-2012, 03:13 PM
Kscott To save you the trouble, I'll... 05-11-2012, 03:31 PM
muzr257 Cambo Cambo Cambo - I tried... 08-11-2012, 09:35 PM
cambo HAHA She's not keen on me... 11-11-2012, 12:10 PM
Happy Can you tell me if I buy AR15... 17-11-2012, 03:42 PM
Beavis It depends on the suppressor... 17-11-2012, 03:48 PM
Bill999 from what Iv seen fitting a... 17-11-2012, 06:43 PM
gimp the gas buster doesn't do... 17-11-2012, 06:55 PM
Bill999 maby for a really over gassed... 17-11-2012, 07:22 PM
gimp Yeah I've got a PRI gasbuster... 17-11-2012, 07:26 PM
Bill999 you probably also gain 1/2 a... 17-11-2012, 07:34 PM
mumabear who sells adjustable gas... 18-11-2012, 10:55 AM
Beavis Brownells 18-11-2012, 11:15 AM
gimp They're also all out of... 18-11-2012, 12:18 PM
Beavis AR-15 ADJUSTABLE LOW-PROFILE... 18-11-2012, 12:55 PM
gimp Aw fuck they were out like a... 18-11-2012, 01:32 PM
Beavis The new sight has had... 18-11-2012, 01:37 PM
Beavis *site 18-11-2012, 01:40 PM
gimp Man railed gas blocks are... 18-11-2012, 01:41 PM
40bung Re: AR Thread 18-11-2012, 01:46 PM
gimp grubscrews work fine on the... 18-11-2012, 01:48 PM
Happy Accuracy wise which barrell... 19-11-2012, 01:33 PM
FletchNZ In theory, the 18" will be... 19-11-2012, 02:01 PM
gimp Heavy barrels are awful, the... 19-11-2012, 02:16 PM
Happy Thanks so 18" 1.8 twist... 19-11-2012, 03:00 PM
FletchNZ As Gimp said try to avoid... 19-11-2012, 03:40 PM
gimp Stainless is arguably more... 19-11-2012, 03:40 PM
Beavis Heavier barrels are more... 19-11-2012, 04:51 PM
compound My pick is match stainless,... 19-11-2012, 10:20 PM
40bung Re: AR Thread 19-11-2012, 10:34 PM
Happy Bell and Carlson thumbhole... 21-11-2012, 11:13 AM
Happy Change of plan found one... 21-11-2012, 02:23 PM
FletchNZ Collapsible stocks are E cat... 21-11-2012, 12:24 PM
RimfireNZ Last time I spoke with the... 21-11-2012, 12:34 PM
Bill999 operating the safety with a... 21-11-2012, 01:46 PM
Happy GUNWORKS MAXIMUS SUPPRESSOR ... 21-11-2012, 03:09 PM
Mistral Nice, can you let us know how... 21-11-2012, 06:39 PM
Happy Will do it was good to be... 21-11-2012, 08:15 PM
Bill999 It was an accident I swear :D... 21-11-2012, 03:19 PM
Happy Someone hide from from my... 21-11-2012, 03:34 PM
Beavis Good shit enjoy 21-11-2012, 05:43 PM
cambo Nice!! 21-11-2012, 06:01 PM
gimp that is a giant suppressor 21-11-2012, 10:41 PM
Happy Always get told that Ive I... 22-11-2012, 08:03 AM
tui_man2 Re: AR Thread 21-11-2012, 10:47 PM
gimp It's a comment. He wasn't... 21-11-2012, 10:51 PM
Spanners Whats your input to a thread... 21-11-2012, 11:43 PM
tui_man2 Re: AR Thread 22-11-2012, 10:12 AM
gimp http://i58.photobucket.com/alb... 23-11-2012, 09:55 PM
JonP Hey Gimp, Would you mind... 24-11-2012, 04:01 AM
gimp 14.5" M4 contour 1:7"... 24-11-2012, 11:56 PM
NZHTR Any one no much about the... 24-11-2012, 08:58 AM
keen fella This one has me very tempted... 24-11-2012, 10:02 AM
cambo :D You want to join the haha... 24-11-2012, 10:25 AM
keen fella By the sounds that you have... 24-11-2012, 12:53 PM
cambo Wont have 1 for this roo... 24-11-2012, 02:22 PM
turner nz i'm in the same boat... 24-11-2012, 11:10 AM
Beavis Na too much hassle. This is a... 24-11-2012, 12:16 PM
faregame Off topic A bit - but what... 24-11-2012, 01:58 PM
Happy What scopes is everyone using... 24-11-2012, 01:01 PM
Bill999 I run a 2.5-8x32 vx3. works... 26-11-2012, 09:18 AM
turner nz Re: AR Thread 24-11-2012, 01:28 PM
Beavis Yes they are good quality.... 24-11-2012, 01:31 PM
Beavis This is how I have my M4 set... 24-11-2012, 01:29 PM
Vapour Re: AR Thread 24-11-2012, 01:47 PM
Beavis He'd probably attach the grip... 24-11-2012, 02:00 PM
gimp Does anyone know of any... 25-11-2012, 12:01 AM
Spanners I have some that are 20rd in... 25-11-2012, 12:09 AM
mikee I do, I have 5 of 7rn... 25-11-2012, 09:21 AM
gimp Got a photo? Do they engage... 25-11-2012, 02:37 PM
JonP Looks good Gimp, Do you... 25-11-2012, 03:51 PM
gimp Just imported them myself. 25-11-2012, 07:32 PM
Spanners They have a chopped lump of... 25-11-2012, 04:14 PM
mikee Yes and Yes, so far. Brought... 25-11-2012, 04:29 PM
gimp That'd make them E, wouldn't... 25-11-2012, 12:13 AM
Spanners Its a shitty grey area as 7rd... 25-11-2012, 12:18 AM
gimp Yes, it's a stupid point of... 25-11-2012, 12:20 AM
turner nz is it still easy enough to... 25-11-2012, 02:24 PM
Happy 4875 04-12-2012, 08:07 AM
faregame missing a drink holder 04-12-2012, 09:19 AM
Rushy Oh come on Happy, you don't... 04-12-2012, 09:57 AM
Toby 4959 06-12-2012, 02:46 PM
Toby Needs more cow bell 04-12-2012, 10:16 AM
Happy Does any one have or seen one... 06-12-2012, 10:59 AM
Beavis At $800 a piece he can fuck... 06-12-2012, 02:38 PM
Happy Umm didnt ask what they cost... 06-12-2012, 02:56 PM
Beavis No. You could probably rig up... 06-12-2012, 04:58 PM
FletchNZ +1 to that, its looks a bit... 06-12-2012, 03:38 PM
Happy Fletch thanks but life's like... 06-12-2012, 09:02 PM
FletchNZ Happy its sound like you need... 07-12-2012, 07:14 AM
Toby It looks pretty good but... 06-12-2012, 02:43 PM
Happy Good thing it was free I ll... 06-12-2012, 07:09 PM
Digit For the price of that stock... 06-12-2012, 07:52 PM
Happy I paid nothing so does that... 06-12-2012, 08:50 PM
MassiveAttack You don't sound that happy... 06-12-2012, 11:52 PM
Beavis $250 would be a fair price... 06-12-2012, 08:25 PM
Happy 250 Stug wants 500 for T3... 06-12-2012, 08:55 PM
Beavis Lol he qouted me $800 at the... 07-12-2012, 07:13 AM
Happy Both you two above show us a... 06-12-2012, 08:59 PM
Beavis Cool story 07-12-2012, 07:18 AM
foxhound Would save the cash for a E... 07-12-2012, 07:31 AM
gimp It looks like shit, carbon... 06-12-2012, 11:18 PM
Happy If you love it then by all... 07-12-2012, 08:23 AM
FletchNZ I don't know anyone who has... 07-12-2012, 08:38 AM
Happy Thank you I see a guy selling... 07-12-2012, 08:52 AM
gimp Yeah just remove grip, drop... 07-12-2012, 08:58 AM
Bill999 Whoa this got serious all of... 07-12-2012, 12:07 PM
Happy Yep...Ask a question get a... 07-12-2012, 12:26 PM
Bill999 Good to hear mate see if you... 07-12-2012, 01:23 PM
Spanners AR Thread 07-12-2012, 12:35 PM
Happy Nah every ones opinions OK... 07-12-2012, 12:58 PM
Savage1 Just a theory. Maybe the... 07-12-2012, 01:45 PM
Happy Off topic a bit sorry but ... 07-12-2012, 01:57 PM
Beavis AR15 would be the most common... 07-12-2012, 02:47 PM
Ryan I would like to own (in no... 07-12-2012, 05:00 PM
Bill999 Im sick of the "If" "Buts"... 07-12-2012, 02:00 PM
Happy Seen this National Shooters... 07-12-2012, 02:23 PM
FletchNZ I really recommend joining... 07-12-2012, 02:29 PM
Happy Just had a looksee round the... 07-12-2012, 03:34 PM
scaggly If you fit the stock to your... 07-12-2012, 03:45 PM
cambo With what is happening in the... 22-12-2012, 05:13 PM
turner nz yup i think i bought my CMMG... 22-12-2012, 05:36 PM
turner nz i'm thinking off ditching my... 25-12-2012, 03:23 PM
Ruger If you've got money to burn,... 25-12-2012, 04:49 PM
Spanners I can do those barrels for... 25-12-2012, 06:22 PM
turner nz ah i didn't realize it was... 25-12-2012, 06:47 PM
Spanners They are from the factory... 25-12-2012, 06:53 PM
Bill999 will the 10.5s keep the gun... 25-12-2012, 07:10 PM
turner nz sweet no worries also do you... 25-12-2012, 07:36 PM
Spanners No front sights - stopped... 25-12-2012, 07:50 PM
Ruger If you end up buying another... 25-12-2012, 07:50 PM
turner nz gutted just checked CMMG site... 25-12-2012, 10:04 PM
Spanners Comes down to what stock you... 25-12-2012, 07:47 PM
gimp that's very heavy 26-12-2012, 06:32 PM
turner nz hmmm well heres the link... 26-12-2012, 07:05 PM
gimp It's a retarded barrel but... 26-12-2012, 07:23 PM
Ruger Bull barrels are .936 at the... 26-12-2012, 07:49 PM
turner nz just used the digital... 26-12-2012, 07:45 PM
Spanners As I said "Completely... 26-12-2012, 08:20 PM
turner nz you got first dibs ruger but... 26-12-2012, 08:11 PM
turner nz spanners can you supply a gas... 26-12-2012, 08:23 PM
Spanners Havnt got any at the mo -... 26-12-2012, 08:33 PM
Digit I think we have the Troy .75... 27-12-2012, 06:30 PM
turner nz very unprofessional, personal... 28-12-2012, 09:41 AM
300winmag Spanners answered all of... 28-12-2012, 12:06 PM
scaggly A bull barrel is heavy, but... 28-12-2012, 01:38 PM
turner nz i didn't say he didn't answer... 28-12-2012, 07:16 PM
mikee I had my original RRA 20 inch... 28-12-2012, 08:01 PM
cambo What scopes/sights do you... 07-02-2013, 09:45 PM
Happy Burriss AR332 for daylight... 07-02-2013, 10:01 PM
cambo Anyone used a Mueller MX1... 07-02-2013, 10:12 PM
Spanners May as well use open sights... 07-02-2013, 11:10 PM
turner nz currently in the same boat... 07-02-2013, 09:49 PM
cambo You have quick release mounts... 07-02-2013, 10:09 PM
Happy Yes.. 08-02-2013, 08:05 AM
Bill999 scope choice depends on... 08-02-2013, 08:53 AM
Bill999 iv never got the idea of... 08-02-2013, 08:54 AM
Happy Ha ha we know you re jokin... 08-02-2013, 12:34 PM
gimp I like being able to remove... 09-02-2013, 11:06 PM
Happy Tussock have you tried... 08-02-2013, 08:13 PM
Beavis They are in my opinion the... 08-02-2013, 08:54 PM
Spudattack Tactical AR | Trade Me... 09-02-2013, 11:04 PM
turner nz Re: AR Thread 10-02-2013, 12:51 PM
gimp Troy. Yeah they work great.... 10-02-2013, 04:11 PM
foxhound ref the troy micro sights,I... 10-02-2013, 05:04 PM
turner nz Re: AR Thread 10-02-2013, 01:52 PM
compound If the gas block is pinned... 10-02-2013, 02:53 PM
turner nz Re: AR Thread 10-02-2013, 03:24 PM
Happy Only win with loctite apply... 10-02-2013, 09:23 PM
compound Last thing you want is the... 10-02-2013, 03:46 PM
turner nz troy battle sights ? dang... 10-02-2013, 04:25 PM
gimp I think I want it instead but... 10-02-2013, 04:45 PM
Scouser Hey, gimp, ive got the NEA... 11-02-2013, 03:06 PM
gimp I think it only needs 1 slot... 10-02-2013, 05:13 PM
foxhound The scope is a leupold vx 1... 10-02-2013, 05:18 PM
foxhound just looked up specs eye... 10-02-2013, 05:31 PM
gimp A2 looooong stock? 10-02-2013, 06:38 PM
foxhound Correct, NEA 15, im happy... 10-02-2013, 06:43 PM
Bill999 of corse you can get away... 11-02-2013, 03:18 PM
Bill999 have you run a bead of hitemp... 11-02-2013, 04:44 PM
cambo Found the link to your... 16-02-2013, 09:38 PM
Bill999 Honestly It is worth the... 18-02-2013, 07:37 AM
Grue http://farm5.staticflickr.com/... 12-02-2013, 01:35 AM
gimp I use the forward assist to... 12-02-2013, 02:06 AM
Grue Last i heard they were... 12-02-2013, 03:10 AM
turner nz picked up a Daniel defense... 13-02-2013, 10:34 AM
Bill999 what did you end up paying? ... 13-02-2013, 10:44 AM
turner nz 560 with gas block, everyone... 13-02-2013, 10:55 AM
madjon_ And the hair could take a... 13-02-2013, 12:06 PM
dogmatix Okay, so I should leave my A2... 13-02-2013, 12:31 PM
Bill999 Im guessing you dont own a... 13-02-2013, 04:32 PM
Bill999 I must need more practice... 13-02-2013, 09:28 PM
40bung Re: AR Thread 13-02-2013, 11:02 PM
turner nz what scope mounts do you guys... 14-02-2013, 07:16 PM
Bill999 RRA cantilever, yup happy.... 14-02-2013, 07:24 PM
turner nz nice thanks bill, yeah i'm... 15-02-2013, 12:08 PM
cambo What slings are best to use... 16-02-2013, 07:30 PM
gimp I like an easily adjustable... 17-02-2013, 12:55 AM
cambo Cheers Gimp. 17-02-2013, 09:20 AM
Beavis V-TAC QUICK ADJUST SLING |... 17-02-2013, 11:34 AM
cambo Found a post on ar15.com on... 17-02-2013, 11:52 AM
Beavis I've got the padded sling.... 17-02-2013, 11:54 AM
cambo Are these sling snap type... 17-02-2013, 04:26 PM
gimp They're known as Hk hooks or... 17-02-2013, 05:04 PM
Spanners I have a bunch of slings with... 17-02-2013, 05:32 PM
Digit We have Promag 1 point and 2... 17-02-2013, 05:40 PM
cambo More info please Digit..... ;) 19-02-2013, 09:54 PM
muzr257 you will need the gas buster... 17-02-2013, 06:45 PM
cambo I have the perfect stuff to... 19-02-2013, 08:24 PM
keen fella Might let you practice on... 19-02-2013, 08:32 PM
cambo I was hoping to use yours as... 19-02-2013, 09:00 PM
cambo Done the gas buster mod to... 25-02-2013, 07:38 PM
cambo Cheers for that Muzr......I'm... 17-02-2013, 07:25 PM
Beavis I don't like the H&K hooks... 17-02-2013, 08:23 PM
cambo Cheers for that Beavis. Those... 17-02-2013, 09:31 PM
Happy Quick question 30 round mags... 18-02-2013, 09:35 PM
mikee I believe if you have an A... 18-02-2013, 09:42 PM
Happy Thank you going thru the... 18-02-2013, 09:45 PM
Bill999 its also illegal to have that... 19-02-2013, 11:00 AM
mikee That is 100% correct, They... 19-02-2013, 11:45 AM
Happy So if I have this right :... 19-02-2013, 12:52 PM
dogmatix Not quite, you can't change... 19-02-2013, 01:20 PM
Spanners Not quite... depends on who... 19-02-2013, 01:23 PM
steven Actually any semi-auto A cat... 12-04-2013, 01:25 PM
dogmatix I stand corrected. 19-02-2013, 01:28 PM
Spanners My AO wont do it, but I know... 19-02-2013, 01:38 PM
Bill999 i have been told it is just a... 19-02-2013, 06:49 PM
foxhound Going to be interesting... 19-02-2013, 08:07 PM
mikee I asked this question many... 19-02-2013, 08:55 PM
Spanners 'Policy' of handins I'm... 19-02-2013, 08:35 PM
Gillie Not mine, but my partner... 19-02-2013, 08:08 PM
foxhound Remember doing jungle lane in... 19-02-2013, 08:12 PM
turner nz so i got my new Daniel... 20-02-2013, 09:06 AM
gimp Nice. I'm getting one once... 20-02-2013, 01:34 PM
compound When Obama's term finishes?... 20-02-2013, 07:12 PM
gimp The current panic sparked by... 20-02-2013, 07:26 PM
Grue +1 Had everything in cart on... 20-02-2013, 07:37 PM
dogmatix Same here. :yuush: 20-02-2013, 07:43 PM
Beavis I got an Aero Precision... 20-02-2013, 09:00 PM
mikee Well I have now got... 20-02-2013, 09:30 PM
dogmatix Does anyone put gaffer tape... 22-02-2013, 07:56 PM
compound Yes I did but only because it... 22-02-2013, 09:29 PM
Grue Same... to protect the brass,... 22-02-2013, 10:00 PM
keen fella Don't think I need it yet... 25-02-2013, 07:47 PM
Bill999 Ill just casually slot this... 26-02-2013, 12:26 PM
cambo Got to try out my toy this... 05-03-2013, 09:48 PM
Dan I did that with the one my... 10-03-2013, 04:58 PM
dogmatix I use the Schmeisser mags,... 10-03-2013, 06:25 PM
cambo Has anyone had experience... 31-03-2013, 03:25 PM
gimp Knockoff 31-03-2013, 04:09 PM
cambo Yeah that's what I thought. ... 31-03-2013, 05:11 PM
gimp Weighed my AR 3.88kg ... 03-04-2013, 10:02 AM
Bill999 yet yesterday you were saying... 03-04-2013, 10:23 AM
gimp I don't know what you mean? 03-04-2013, 10:51 AM
Happy Was waiting to see how long... 03-04-2013, 11:08 AM
Bill999 that was allmost like magic 03-04-2013, 11:03 AM
gimp No-one advertises their... 03-04-2013, 11:21 AM
turner nz how about knock off mag... 04-04-2013, 11:10 AM
gimp Yeah probably fine Get the... 04-04-2013, 11:11 AM
turner nz yeah just realized how to... 04-04-2013, 11:13 AM
turner nz wholesale 10pcs/lot MAGPUL... 04-04-2013, 11:14 AM
gimp Because those only fit PMAGs.... 04-04-2013, 11:41 AM
turner nz oh right...... OK thrid time... 04-04-2013, 12:00 PM
Digit FWIW we do a pack of 3... 04-04-2013, 01:12 PM
Bill999 is there anywhere in NZ I can... 04-04-2013, 04:36 PM
scaggly Billet Upper Receiver... 04-04-2013, 07:05 PM
Digit Weve sold out on the NEAs. 04-04-2013, 07:22 PM
NBA Hi All, Im in the market... 04-04-2013, 08:48 PM
Beavis Brownells sells DPMS uppers,... 04-04-2013, 08:56 PM
Towely Rock river make a really nice... 05-04-2013, 08:37 AM
Bill999 i did look at what digit had,... 04-04-2013, 10:21 PM
turner nz Bet they ain't cheap... 05-04-2013, 08:40 AM
Beavis RRA had to start making their... 05-04-2013, 08:41 AM
Towely That was early on in the... 05-04-2013, 08:56 AM
NZShoota The factory steel mag (FN FAL... 08-04-2013, 07:32 AM
Beavis I haven't followed the issue... 05-04-2013, 09:40 AM
turner nz can you import AR magazines... 05-04-2013, 11:58 AM
Glu I herd there are some DPMS... 05-04-2013, 12:16 PM
dogmatix If you mean AR15 mags, good... 05-04-2013, 05:59 PM
Spanners My guy in Texas wants to buy... 05-04-2013, 07:52 PM
300winmag Imagine having a couple of... 05-04-2013, 08:52 PM
gimp He lives near a lot of people... 05-04-2013, 08:59 PM
turner nz Israel makes ar mags too,... 06-04-2013, 07:51 PM
Happy Quick question : BVAC.223... 10-04-2013, 03:47 PM
dogmatix Its good stuff, mainly LC 09... 10-04-2013, 03:51 PM
Bill999 pick up the brass too, lake... 10-04-2013, 04:12 PM
Happy Roger and Roger. I saw that... 10-04-2013, 04:22 PM
Bill999 I think thats just to cover... 10-04-2013, 05:09 PM
Happy I have two quick release... 10-04-2013, 09:24 PM
veitnamcam Thought these things were... 10-04-2013, 10:56 PM
mikee They are generally very... 10-04-2013, 11:22 PM
Happy Like the others say. Use it,... 11-04-2013, 09:05 AM
dogmatix Mine has only misfed once,... 11-04-2013, 08:11 AM
Scouser Same, buy a 'good one' and... 11-04-2013, 08:36 AM
Grue Started getting jams one day... 11-04-2013, 09:36 AM
veitnamcam So its like buy a Sako and... 11-04-2013, 10:06 AM
Happy OOppsy wrong question now the... 11-04-2013, 10:29 AM
mikee You are welcome to have a try... 11-04-2013, 10:44 AM
gimp When you say "military style"... 11-04-2013, 10:50 AM
veitnamcam Cheers Mike, will have to do... 11-04-2013, 11:13 AM
mikee No worries, I have 2 already... 11-04-2013, 01:36 PM
Beavis Most will do what you want... 11-04-2013, 11:16 AM
gimp Awful mags are common in NZ... 11-04-2013, 11:23 AM
Beavis It would be nice if we could... 11-04-2013, 01:19 PM
gimp I think the 10 round ones are... 11-04-2013, 02:27 PM
veitnamcam Hmm need to sort somewhere... 11-04-2013, 02:24 PM
Spanners The biggest issue with ARs is... 11-04-2013, 10:34 PM
Haydendev id be interested in having a... 13-04-2013, 11:39 AM
ian21 Bolt action AR15 Does... 14-04-2013, 05:26 PM
Grue MidwestPX.com... 12-04-2013, 03:07 AM
steven Out of curiosity, anyone... 12-04-2013, 01:39 PM
bas It used to be possible, lots... 12-04-2013, 09:02 PM
30calterry been offerd a new ish... 14-04-2013, 08:47 PM
Beavis I'd probably offer $1700 if... 14-04-2013, 10:48 PM
30calterry thanks , after playn with... 14-04-2013, 11:25 PM
hanse So my 14.5" NEA, when I put... 25-04-2013, 01:04 PM
Vapour I used mine with Waitaki can... 25-04-2013, 03:05 PM
gimp It'll have a rifle buffer... 25-04-2013, 01:27 PM
foxhound Advice sort on a leupold mark... 25-04-2013, 01:39 PM
hanse Thanks, hopefully gas in the... 25-04-2013, 03:29 PM
Spanners Handguard like this?... 25-04-2013, 03:31 PM
hanse Hi there, judging by your... 25-04-2013, 04:23 PM
Spanners Yeah it's just a off the... 25-04-2013, 04:25 PM
hanse What sort of price for a... 25-04-2013, 05:33 PM
Spanners Only have rifle and carbine ... 25-04-2013, 05:36 PM
hanse well hopefully the custom one... 25-04-2013, 05:42 PM
Spanners Post up some pics when done ... 25-04-2013, 05:45 PM
6MMBR Can anyone advise if the... 28-04-2013, 02:31 AM
gimp Won't be able to work the... 28-04-2013, 02:42 AM
Bernie Just a question , I gave my... 28-04-2013, 11:32 AM
Beavis I go after heaps, like... 28-04-2013, 11:48 AM
Beavis I'm not really anal about... 28-04-2013, 11:49 AM
Bernie Yeah I should have aimed at... 28-04-2013, 11:56 AM
hanse Does anybody have an... 28-04-2013, 08:56 PM
Vapour I recently ordered a PRI adj... 29-04-2013, 11:27 AM
mikee $150 off tarde me is a... 28-04-2013, 08:59 PM
Spanners Clean it when the accuracy... 28-04-2013, 09:06 PM
hanse Thanks Mikee, haha yeah I... 28-04-2013, 09:10 PM
gimp Get a H2 buffer E:... 28-04-2013, 09:12 PM
hanse So you cant get a heavier... 28-04-2013, 10:43 PM
Beavis Rub some chassis grease on... 28-04-2013, 09:19 PM
Spanners DIY poormans adj gas block -... 28-04-2013, 09:22 PM
steven This is sort of funny if it... 28-04-2013, 10:23 PM
Nibblet That was one of the better... 29-04-2013, 12:50 PM
Spanners I was sick in my mouth a... 28-04-2013, 10:31 PM
Spanners Yes you can. Speaking of... 28-04-2013, 10:48 PM
Col.Whiplash Got me a new NEA. The trigger... 16-05-2013, 08:18 PM
Spanners You got a good one then :D... 16-05-2013, 08:20 PM
scaggly You could try some of the... 16-05-2013, 09:08 PM
Spanners JP yellow make the pull... 16-05-2013, 09:12 PM
scaggly I still have one of the very... 16-05-2013, 09:38 PM
Beavis It would be nice if the... 16-05-2013, 10:53 PM
Spanners AR Thread 17-05-2013, 12:38 AM
Col.Whiplash Thanks chaps for the... 17-05-2013, 07:51 AM
mikee Get the JP trigger and try it... 17-05-2013, 08:46 AM
dogmatix Brownells seem to be sold out... 17-05-2013, 09:01 AM
Digit We have Patriot Ordinance... 17-05-2013, 09:12 AM
veitnamcam I know nothing about lots of... 17-05-2013, 07:11 PM
Nibblet Time and pressure my friend,... 17-05-2013, 07:29 PM
cambo Anyone used any Barnaul ammo... 19-05-2013, 02:44 PM
Beavis 3-4MOA+ 19-05-2013, 03:02 PM
Beavis Functions 100% but shoots... 19-05-2013, 03:02 PM
cambo Cheers Beavis. I'll try some... 19-05-2013, 03:08 PM
dogmatix Cambo, you might be better... 19-05-2013, 04:50 PM
cambo I would if I could dogmatix.... 19-05-2013, 05:15 PM
muzr257 Barnaul voids any and all... 20-05-2013, 09:01 AM
dogmatix I'm sure it was the same with... 20-05-2013, 04:15 PM
cambo Cheers Muzr :thumbsup: I... 20-05-2013, 06:33 PM
gimp Wolf is an importer. They... 20-05-2013, 06:38 PM
cambo I'm needing to get some rails... 04-06-2013, 02:07 PM
Nibblet Longer barrel cut down? 12-06-2013, 05:25 AM
Beavis What is ur current set up? If... 12-06-2013, 07:54 AM
Digit We will have 10.5 barrels... 12-06-2013, 07:54 AM
Bill999 I chopped a 16 inch daniel... 12-06-2013, 08:46 AM
mcche171 Thanks for replays. Current... 12-06-2013, 08:17 PM
Bill999 my barrel is chrome lined... 12-06-2013, 08:27 PM
mcche171 Good to hear thanks. Means i... 12-06-2013, 08:49 PM
Bill999 gas systems are either mid or... 12-06-2013, 08:31 PM
Spanners Or in the barrel nut, pistol,... 12-06-2013, 11:32 PM
Beavis I think it will be more of an... 12-06-2013, 08:31 PM
mcche171 Ok Ill look into the gas... 12-06-2013, 08:50 PM
Bill999 factor in that you will most... 12-06-2013, 10:53 PM
gimp and intermediate 12-06-2013, 11:35 PM
cambo Anyone use an AFG on their... 29-06-2013, 07:13 PM
gimp Meh. Neither. 29-06-2013, 07:55 PM
Bill999 A mate uses the magpul afg... 30-06-2013, 12:46 PM
Beavis Run an AFG on my 6940. The... 30-06-2013, 04:35 PM
cambo Anyone got some spare ladder... 08-07-2013, 10:32 PM
cambo Anyone use 1 of these? AR... 26-07-2013, 09:28 PM
gimp You don't actually need any... 26-07-2013, 09:30 PM
cambo Has other handy bits on it... 26-07-2013, 09:42 PM
gimp I have the multitasker one,... 26-07-2013, 09:46 PM
skeet72 for all you ar nuts, what do... 30-07-2013, 02:42 PM
Beavis Over priced, gay colour. Buy... 30-07-2013, 03:32 PM
skeet72 $2150 for an remington... 30-07-2013, 05:56 PM
skeet72 i take it your one of those... 31-07-2013, 09:14 AM
Happy 30CALTerry has used one. Its... 31-07-2013, 05:05 PM
skeet72 there is a fwd assist mod... 31-07-2013, 05:43 PM
Spanners IMO the fwd assist vent is a... 31-07-2013, 05:50 PM
Beavis Bushmaster isnt the yard... 30-07-2013, 06:22 PM
cambo I have 1 ;) Nice rifle. I... 30-07-2013, 07:14 PM
Bill999 Haha fighting opinion with... 31-07-2013, 10:25 AM
Nibblet Not sure I would say camo is... 31-07-2013, 10:49 AM
FletchNZ Colour is all up to you... 31-07-2013, 10:59 AM
Digit A good read on AR scopes by... 31-07-2013, 11:03 AM
Bill999 colour of the barrel isnt... 31-07-2013, 12:38 PM
skeet72 this may be tru but if left... 31-07-2013, 04:57 PM
40bung Need to get yourself a jp... 31-07-2013, 04:36 PM
Spanners I have wood, green, black,... 31-07-2013, 05:49 PM
Bill999 Better to do the poor mans... 31-07-2013, 05:53 PM
Spanners Fill the end of gas tube with... 31-07-2013, 05:55 PM
cambo Needed an accu-wedge in the... 11-08-2013, 01:49 PM
Gerbs Ya'll suck! Now I want an... 17-08-2013, 11:47 AM
Rushy Welcome aboard Gerbs. You... 17-08-2013, 12:42 PM
cambo Thinking of a... 21-09-2013, 08:09 PM
mikee My mate uses this 14513 I... 21-09-2013, 08:34 PM
Kiwi Greg I did a quick "test" the... 22-09-2013, 11:42 AM
gimp You have the reciprocating... 22-09-2013, 12:10 PM
Towely I use a brake on my 3 gun... 22-09-2013, 12:37 PM
Beavis I'm using one of the new NEA... 22-09-2013, 08:52 PM
Spanners I've got JP, STI, and some I... 22-09-2013, 11:39 PM
cambo Saw an AR with 1 of these... 23-09-2013, 07:01 PM
muzr257 18 rounds on the v drill in... 24-09-2013, 12:25 PM
cambo Seeing it in action made me... 24-09-2013, 07:07 PM
vulcan Hi all, I'm new to this... 10-10-2013, 12:25 AM
Rushy Welcome aboard Vulcan. As I... 10-10-2013, 06:44 AM
vulcan I meant E endorsement...... 10-10-2013, 09:10 AM
Towely E cat features currently are,... 10-10-2013, 02:05 PM
vulcan Only A2 style pistol grip is... 11-10-2013, 02:57 AM
Scouser Vulcan....its really best to... 11-10-2013, 11:37 AM
Ruger1022 Hi This is all good... 28-10-2013, 04:46 PM
Digit ...plus collapseable stock.... 10-10-2013, 02:09 PM
Towely Collapsable stock, i knew i... 10-10-2013, 02:14 PM
mcche171 The Gun shitty one is... 28-10-2013, 05:02 PM
Ruger1022 Thanks for that I was liking... 28-10-2013, 06:13 PM
Towely If you are looking at... 28-10-2013, 07:05 PM
bas I recently bought a SR-556VT.... 28-10-2013, 07:51 PM
foxhound Spear AR Mags, Just received... 05-11-2013, 02:45 PM
PerazziSC3 whats the weight of stock... 28-10-2013, 05:10 PM
mcche171 NEA's website has 6lb 10oz... 28-10-2013, 05:30 PM
Towely The rugers are heavy as fuck... 28-10-2013, 07:00 PM
cambo Here's a pic of it all... 22-01-2014, 07:02 AM
dogmatix I do recommend some rail hand... 22-01-2014, 09:20 AM
cambo Already fitted before pics... 22-01-2014, 06:35 PM
JayColli That's one sexy R15 Cambo!... 22-01-2014, 10:39 AM
cambo More likely to get it black... 22-01-2014, 06:36 PM
seano Very nice rifle Cambo ...I... 22-01-2014, 11:14 AM
Gunzrrr Hi guys ... I want to keep my... 22-01-2014, 06:48 PM
NZShoota Bell and Carlson's make... 23-01-2014, 09:19 PM
cambo Spear Mags Stock Spear Mags... 22-01-2014, 06:56 PM
specweapon I'm going to be buying an AR... 30-01-2014, 08:49 PM
Bernie Don't know if you can get a... 30-01-2014, 09:50 PM
specweapon Yeah i'm not looking for... 30-01-2014, 10:56 PM
FletchNZ One of my 14.5" ARs weighs... 31-01-2014, 07:08 AM
gimp that's pretty light, is that... 31-01-2014, 07:18 AM
FletchNZ No mag and no suppressor, and... 31-01-2014, 08:27 AM
specweapon Yeah I was pretty tempted by... 31-01-2014, 12:35 PM
Shamus To swap over a AR15 that has... 09-06-2014, 10:50 PM
Towely Couple of ways to do it. You... 09-06-2014, 11:47 PM
Shamus Cheers just making sure I... 10-06-2014, 08:29 AM
Banana You're better off using a... 10-06-2014, 10:10 AM
redbang Howdy all :), some noobie... 12-06-2014, 04:34 PM
Koshogi No. For people who like to... 12-06-2014, 05:39 PM
Beavis Vertical grip makes the rifle... 12-06-2014, 06:49 PM
cambo Welcome to the "Dark Side" RB... 13-06-2014, 07:02 PM
redbang Heeeeelp, I'm trapped in here... 13-06-2014, 07:19 PM
EK9132 Some good input Koshogi! QD... 12-06-2014, 10:15 PM
hanse Saw a joker flogging a... 12-06-2014, 10:35 PM
P38 Fu*k Me :O_O: Is that what... 13-06-2014, 06:38 PM
Koshogi I like QD scope mounts. It... 12-06-2014, 10:56 PM
Towely I change out my acogs and... 13-06-2014, 12:14 AM
Koshogi Excellent advice. 13-06-2014, 11:17 AM
P38 Towley Something like this... 13-06-2014, 06:43 PM
mikee What no fluffy dice?? 13-06-2014, 08:38 PM
P38 Mikee Fluffy dice are not... 13-06-2014, 08:49 PM
Banana http://i1278.photobucket.com/a... 14-06-2014, 07:59 PM
Rushy Excellent photograph. 14-06-2014, 08:03 PM
Banana Thanks Rushy. Here's another... 14-06-2014, 09:21 PM
redbang What sort of neck tension are... 15-06-2014, 08:27 PM
res I crimp for all semi auto... 15-06-2014, 08:30 PM
cambo I don't bother crimping. My... 15-06-2014, 08:38 PM
specweapon I crimp as I like to seat my... 15-06-2014, 08:46 PM
dogmatix I don't crimp. Use normal... 15-06-2014, 08:47 PM
dogmatix Anybody brought in a complete... 17-06-2014, 12:55 PM
Beavis Don't buy DPMS. I got an... 17-06-2014, 05:56 PM
furstimer Pmed you to learn about the... 17-06-2014, 06:52 PM
Towely Care to explain why he... 17-06-2014, 06:18 PM
Beavis I use DPMS small parts but... 17-06-2014, 06:41 PM
gimp Because there are people who... 17-06-2014, 11:31 PM
dogmatix But Brownells don't have a... 17-06-2014, 06:30 PM
Vapour Have a look at the govt 20"... 17-06-2014, 07:02 PM
Koshogi I would ask Rainer Arms to... 17-06-2014, 07:32 PM
Banana Better to ask Brownells if... 17-06-2014, 08:32 PM
Towely Shit, i must have the only 3... 17-06-2014, 08:32 PM
scaggly Much as I like to joke about... 17-06-2014, 11:11 PM
Herbmiester I have been using and... 17-06-2014, 11:22 PM
redbang Which breed has been busting... 18-06-2014, 10:25 AM
Beavis Well done 17-06-2014, 08:47 PM
Danny AR Thread 17-06-2014, 10:34 PM
Bill999 only one Iv seen has been NEA, 18-06-2014, 11:55 AM
Towely I had an Nea break one as... 18-06-2014, 02:32 PM
Rushy What was the cause? After... 18-06-2014, 02:36 PM
scaggly Digit might be able to chime... 18-06-2014, 03:11 PM
Rushy Thanks Scaggly. 18-06-2014, 03:42 PM
Beavis A friend had a bolt lug fail... 18-06-2014, 06:08 PM
redbang The NEA's have MPI and HPT in... 19-06-2014, 02:26 PM
gimp They always claimed "HP and... 19-06-2014, 10:52 PM
scaggly I was under the impression... 20-06-2014, 09:09 AM
gimp It picks up the bolts with... 20-06-2014, 11:13 AM
steven All colt bolts as far as I... 26-11-2014, 12:10 PM
EK9132 Anyone running the Oceania... 19-06-2014, 11:13 PM
res Is the barrel nut done up... 19-06-2014, 11:19 PM
EK9132 Barrel nut was swapped by a... 20-06-2014, 04:50 PM
Spanners MPI only picks up external... 20-06-2014, 11:27 AM
gimp It prevents that failure in... 20-06-2014, 12:06 PM
redbang Interesting stuff. At the... 20-06-2014, 12:27 PM
Rushy Yep that is interesting. I... 20-06-2014, 12:30 PM
scaggly I was under the impression... 20-06-2014, 12:39 PM
Rushy I never got the brass but... 20-06-2014, 01:07 PM
scaggly Out of curiosity (and having... 20-06-2014, 12:27 PM
Ryan Not an AR obviously but my AK... 20-06-2014, 02:34 PM
FletchNZ Yeah my DPMS AR 308 came... 20-06-2014, 02:43 PM
Bill999 is there anyway to remove a... 20-06-2014, 09:31 PM
Bill999 too late never mind......... 20-06-2014, 09:32 PM
Rushy Bugger! 20-06-2014, 09:40 PM
dogmatix Yes, but you need to do this... 20-06-2014, 09:40 PM
Spanners Dont do that.... thats... 20-06-2014, 09:43 PM
Bill999 sheared a few coils off the... 20-06-2014, 09:41 PM
Bill999 be good if it came with some... 20-06-2014, 10:42 PM
Shamus Ok so I got an AR and it has... 03-07-2014, 12:28 AM
res The market for this sort of... 03-07-2014, 01:16 AM
Shamus Yeah its not an ideal time... 03-07-2014, 09:50 AM
Moutere I can swap you a Hogue grip... 03-07-2014, 09:53 AM
Banana I've got a spare Ergo and A2... 03-07-2014, 10:00 AM
Daggers_187 Sent you a PM Shamus. 03-07-2014, 11:55 AM
Shamus Once I work out what I... 03-07-2014, 03:23 PM
Shamus Moutere and Banana I am... 03-07-2014, 08:38 PM
Moutere Good stuff. 03-07-2014, 08:55 PM
Koshogi 2659126592265932659426595 08-07-2014, 05:11 PM
gimp Rainier, neat. 08-07-2014, 06:20 PM
Boar Freak Hi, Have anyone used a... 12-07-2014, 03:46 PM
Simon Yep. I have one, the 18"... 12-07-2014, 06:00 PM
Boar Freak How heavy is it? 12-07-2014, 06:56 PM
Simon I have a burris AR-536 on it.... 12-07-2014, 09:54 PM
Nibblet Yeah I really like my R15 too. 12-07-2014, 10:16 PM
Trevs Pump Action AR's. No E-cat... 14-07-2014, 03:28 PM
Rushy That would look out of place... 14-07-2014, 04:41 PM
res So does my saiga 12 with... 14-07-2014, 04:49 PM
Sasquatch Gidday, have been reading... 25-11-2014, 06:25 PM
res The heavy buffer may help but... 25-11-2014, 06:51 PM
Sasquatch Hi thanks for the response... 25-11-2014, 07:05 PM
Rushy Welcome Saquatch 25-11-2014, 06:54 PM
40bung What length buffer tube you... 25-11-2014, 07:38 PM
Sasquatch Just had a look on their... 25-11-2014, 07:57 PM
40bung Ah, all good then man. 25-11-2014, 08:06 PM
Sasquatch If i had of said rifle... 25-11-2014, 08:15 PM
40bung Yeah it would have hah. Just... 25-11-2014, 08:20 PM
nzfubz My NEA is with Robbie... 25-11-2014, 08:21 PM
Beavis You could have a go at making... 25-11-2014, 08:35 PM
nzfubz Yeah just asked him to do it... 25-11-2014, 08:37 PM
Sasquatch nzfubz, I'll be interested to... 25-11-2014, 08:43 PM
Savage1 Any engineer could do it. ... 25-11-2014, 08:51 PM
Digit If the gun has a thumbhole... 25-11-2014, 08:56 PM
Sasquatch It the Spear Mags stock, so... 25-11-2014, 09:17 PM
Beavis Also a carbine buffer in said... 25-11-2014, 09:11 PM
Beavis You're SOL mate. Adjustable... 25-11-2014, 09:46 PM
anderset20 Adjustable gas blocks. Who... 25-11-2014, 09:51 PM
dogmatix Get it from Brownells. ... 25-11-2014, 10:30 PM
Gerbs Order 2 low profile ones. I'd... 25-11-2014, 10:34 PM
Banana The T2 buffer is lighter than... 25-11-2014, 11:09 PM
res Most adjustable gas blocks... 25-11-2014, 11:50 PM
steven I am pretty sure if it goes... 26-11-2014, 07:12 AM
res While you are right,most gas... 26-11-2014, 01:49 PM
grunzter res, would you recommend an... 26-11-2014, 08:56 PM
res I personally like the very... 26-11-2014, 09:06 PM
res http://tapatalk.imageshack.com... 26-11-2014, 09:10 PM
Konev will that one fit in a... 26-11-2014, 09:26 PM
grunzter Thanks Res, its already in my... 26-11-2014, 09:37 PM
res I don't know for sure, but I... 26-11-2014, 10:34 PM
Simon This is a good video on the... 26-11-2014, 09:37 PM
308 That was a bloody good vid I... 26-11-2014, 10:11 PM
P38 My first AR15 ............... 29-11-2014, 11:32 AM
Konev spring was shipped a week... 29-11-2014, 07:15 PM
steven P38, what is the rear stock? 29-11-2014, 08:14 PM
Shamus It is an AIL stock - NZ made.... 29-11-2014, 08:55 PM
P38 Steven One of these. ... 29-11-2014, 09:33 PM
steven USPS? 29-11-2014, 08:06 PM
Konev yup 29-11-2014, 08:19 PM
steven Then from what I have heard... 29-11-2014, 08:25 PM
Trevs Here's an easy lubrication... 30-11-2014, 03:45 PM
P38 Trevs Bloody awesome mate.... 30-11-2014, 04:23 PM
mikee Get yourself the dvd "Gas gun... 30-11-2014, 06:50 PM
steven Hi Guys looking for a good... 01-12-2014, 08:06 PM
Shamus Herbmiester has got some nice... 01-12-2014, 08:26 PM
steven P38 thought so, its on my... 01-12-2014, 07:58 PM
Beavis If it is only for service... 01-12-2014, 08:35 PM
steven Brownells is a probable... 01-12-2014, 08:56 PM
anderset20 Just about to order an... 03-12-2014, 10:53 AM
PERRISCICABA So, here is my "Santa... 09-12-2014, 11:06 PM
steven The write ups on stag have... 10-12-2014, 10:16 AM
steven If its <$100 I'd allow 2... 03-12-2014, 11:06 AM
anderset20 What are the shipping costs... 03-12-2014, 01:58 PM
anderset20 Yeah I'm after an adjustable... 03-12-2014, 11:08 AM
steven Hmm thoughts on "slapping" a... 03-12-2014, 01:10 PM
steven . 03-12-2014, 01:25 PM
Daggers_187 Make sure the feed ramp cuts... 03-12-2014, 01:36 PM
Banana It'll be fine. A carbine... 03-12-2014, 01:49 PM
Banana $16.25 via Parcel Post... 03-12-2014, 02:08 PM
steven Looking at my Brownells... 03-12-2014, 02:15 PM
anderset20 http://tapatalk.imageshack.com... 05-12-2014, 11:40 AM
P38 Nice :thumbsup: Cheers... 05-12-2014, 05:31 PM
Kscott I'm hoping Santa will be nice... 05-12-2014, 02:38 PM
anderset20 Really cheap actually bout... 05-12-2014, 02:52 PM
Konev just ordered an adjustable... 09-12-2014, 10:11 PM
anderset20 Be prepared to wait, they... 10-12-2014, 06:11 AM
Konev brownells showing instock for... 10-12-2014, 11:27 AM
anderset20 Yeah mine is too. Brownells... 10-12-2014, 11:40 AM
Banana When asked about the Seekins... 10-12-2014, 12:21 PM
res Very nice set up 09-12-2014, 11:40 PM
PERRISCICABA Hi steven, I got the rifle... 10-12-2014, 10:42 AM
steven So the order for the Colt M4... 12-12-2014, 12:21 PM
PERRISCICABA Awesome steven, I am sorry to... 12-12-2014, 12:49 PM
steven :oh noes: He sent the... 16-12-2014, 06:16 PM
ebf They were still busy early... 12-12-2014, 02:23 PM
steven Yeah I'm watching that site,... 10-12-2014, 10:57 AM
PERRISCICABA I Well, I just got it... 10-12-2014, 12:11 PM
anderset20 Wahoo!! Just got a seekins... 10-12-2014, 12:32 PM
steven Having seen some pictures of... 11-12-2014, 06:41 AM
steven Thanks, I'll see tomorrow... 12-12-2014, 04:03 PM
Kscott https://www.youtube.com/watch?... 13-12-2014, 03:17 PM
Beaker Thats pretty cool! Might... 13-12-2014, 09:05 PM
Konev Seekins precision gasblock... 17-12-2014, 07:17 AM
anderset20 What slings are you guys... 22-12-2014, 06:10 AM
2gnscib I use a Butler Creek neoprene... 22-12-2014, 07:08 PM
cambo I copied a design from off... 25-12-2014, 05:39 PM
anderset20 So what your saying is you... 25-12-2014, 05:47 PM
cambo Yup :) 25-12-2014, 09:07 PM
res The same old leather sling... 22-12-2014, 09:21 PM
anderset20 Yeah I use a neoprene but... 22-12-2014, 10:24 PM
Konev i have an eberlestock pack... 22-12-2014, 10:57 PM
res How do you find it? 23-12-2014, 01:15 AM
steven Stupid things not to do with... 25-12-2014, 02:55 PM
Beavis Did you try to pop the pivot... 25-12-2014, 02:59 PM
steven ah duh....that would have... 25-12-2014, 03:29 PM
Beavis All good. I was there once.... 25-12-2014, 04:00 PM
turner nz so finally shot my ar... 25-12-2014, 04:51 PM
anderset20 AR Thread 25-12-2014, 05:46 PM
res Replacing your trigger will... 25-12-2014, 05:05 PM
turner nz yeah mate i'm looking at this... 25-12-2014, 05:55 PM
res There are plenty of other... 25-12-2014, 06:33 PM
anderset20 AR Thread 25-12-2014, 06:36 PM
steven I find the trigger on my... 25-12-2014, 06:43 PM
anderset20 The trigger on my spikes is... 25-12-2014, 08:19 PM
turner nz brownells only have bloody... 25-12-2014, 09:38 PM
Beavis Yes totally do able 25-12-2014, 10:00 PM
anderset20 Does anyone have any clever... 26-12-2014, 10:14 AM
cambo What about something like... 26-12-2014, 03:27 PM
TeRei Get Santa to make a late... 26-12-2014, 11:23 AM
anderset20 They only work on the e-cat... 26-12-2014, 03:29 PM
Banana http://www.brownells.com/shoot... 26-12-2014, 04:02 PM
cambo They have them to suit all... 26-12-2014, 05:49 PM
Konev https://scontent-a-lax.xx.fbcd... 26-12-2014, 06:06 PM
PERRISCICABA Konev and friends/colleagues,... 27-12-2014, 07:59 AM
Beavis Must have got lost in the... 26-12-2014, 06:46 PM
Konev Its now back in Auckland. 26-12-2014, 07:38 PM
Beavis Brownells has just moved... 27-12-2014, 09:26 AM
PERRISCICABA Thank You for the info Beavis 27-12-2014, 10:14 AM
Konev takes about 5 days for order... 27-12-2014, 07:49 PM
PERRISCICABA So, my order from 18/12... 27-12-2014, 09:48 PM
Koshogi Just remember that this is... 27-12-2014, 10:11 PM
Dannz Does anyone know of an NZ... 28-12-2014, 07:30 PM
308 P Mag copy I think AR-15... 28-12-2014, 08:40 PM
Dannz Yeah, I've seen those and... 29-12-2014, 12:55 PM
res Some on tardeme right now 29-12-2014, 02:36 PM
Dannz Scored a 7-round PMAG,... 08-01-2015, 11:09 AM
Konev are 10 rounders still ecat? i... 29-12-2014, 03:58 PM
res Still e cat, but you can now... 29-12-2014, 04:07 PM
steven and if you buy a CMMG... 05-01-2015, 02:13 PM
nzteza Barnaul 55gr or 62gr 05-01-2015, 07:00 PM
steven Barnaul was, 223 Barnaul... 05-01-2015, 08:15 PM
steven dp. 05-01-2015, 08:15 PM
steven Yep I want to try that... 05-01-2015, 08:40 PM
steven 22LR CMMG conversion Stag... 06-01-2015, 10:34 AM
steven Belmont FMJ 55gr v 62gr FMJ... 06-01-2015, 10:38 AM
anderset20 Help please. Can't decide on... 06-01-2015, 05:18 PM
res Do you prefer one or two... 06-01-2015, 07:54 PM
anderset20 Never tried one to be honest.... 06-01-2015, 07:56 PM
steven Is ALG exportable? I thought... 06-01-2015, 08:42 PM
anderset20 Ken at NZAR15 has them in... 06-01-2015, 08:43 PM
anderset20 Well interestingly I tried to... 07-01-2015, 09:19 AM
res That sounds nice 07-01-2015, 02:30 PM
steven Hmm Ok brownells wont export... 07-01-2015, 03:19 PM
anderset20 Happy man with new scope... 07-01-2015, 06:36 PM
cambo I see you been in at Dix's. I... 07-01-2015, 07:07 PM
anderset20 Yep I rarely walk out of... 07-01-2015, 07:09 PM
anderset20 Yep I rarely walk out of... 07-01-2015, 07:15 PM
res Funny, the cops have refused... 08-01-2015, 02:03 PM
Dannz Thankfully no problems for me... 09-01-2015, 05:39 PM
Bernie 32844 had a go with a camo... 08-01-2015, 03:29 PM
Ryan Sorry Bernie but :sick: 08-01-2015, 03:37 PM
Bernie I know feel the same 08-01-2015, 03:38 PM
Bernie Just stripped tape off... 08-01-2015, 04:12 PM
steven my eyes.........oh god..... 09-01-2015, 08:05 PM
anderset20 For anyone that might find... 10-01-2015, 05:51 PM
PERRISCICABA anderset20, LOL! That... 11-01-2015, 08:16 AM
anderset20 Lol all yours mate. Was only... 11-01-2015, 10:22 AM
PERRISCICABA Cool, I finishing getting it,... 11-01-2015, 02:51 PM
redbang Anyone out there got Windham... 17-01-2015, 12:44 PM
foxhound Its good when it all comes... 11-01-2015, 08:36 AM
Bernie Yip I have Windham. Very... 17-01-2015, 12:55 PM
Youngllama Yep i also have a windham... 17-01-2015, 01:49 PM
turner nz these look to be well priced... 18-01-2015, 09:15 AM
steven S&W looks interesting... 18-01-2015, 10:46 AM
Gerbs Windham Weaponry Varmint... 18-01-2015, 11:50 AM
steven I got a stag because it was... 18-01-2015, 10:36 AM
dirtyhabit Are they in stock yet? 18-01-2015, 10:37 AM
steven Where/who did you get the... 18-01-2015, 11:35 PM
Gerbs Deadeye Dicks in Levin. Was... 19-01-2015, 11:11 PM
Dublin Just wondering if anyone has... 20-01-2015, 08:31 PM
res A mate has been thrashing one... 20-01-2015, 09:09 PM
anderset20 Anyone with the AIL a-cat or... 20-01-2015, 09:06 PM
steven How did you do it? 24-01-2015, 08:08 PM
anderset20 It's literally a $5 part from... 25-01-2015, 08:49 AM
steven I had terminal problems with... 26-01-2015, 05:51 PM
anderset20 Anyone running a Samson... 21-01-2015, 02:25 PM
Koshogi Yeah, I've got a 12.37,... 21-01-2015, 03:49 PM
anderset20 The Samson modifies off a... 24-01-2015, 04:36 PM
Koshogi Yes. Only $20. What don't... 24-01-2015, 07:04 PM
anderset20 It's ok I just would rather a... 25-01-2015, 08:47 AM
anderset20 To bring this back up, why... 27-02-2015, 09:42 AM
anderset20 Hmm ok good to know, I wasn't... 21-01-2015, 03:52 PM
Koshogi Easy to import. As long as... 21-01-2015, 04:03 PM
anderset20 Ok haven't done that before... 21-01-2015, 04:19 PM
Koshogi Only export for a rail. (... 21-01-2015, 04:25 PM
300CALMAN Hi Koshogi, interesting... 21-01-2015, 10:51 PM
Banana Brownells only charge $10 or... 22-01-2015, 07:28 AM
anderset20 And if brownells don't have... 24-01-2015, 12:22 PM
Koshogi Somethings you can't have. 24-01-2015, 02:44 PM
Banana Special order through... 24-01-2015, 12:29 PM
redbang Anybody have a carbon fiber... 26-01-2015, 07:23 PM
gimp falls apart 26-01-2015, 10:33 PM
anderset20 I held one. Felt like a toy.... 26-01-2015, 10:36 PM
gimp It's the density I'd... 26-01-2015, 10:39 PM
redbang I'm not being smart, merely... 27-01-2015, 05:47 AM
gimp all of the above really 27-01-2015, 07:56 AM
steven Lighter if that is useful to... 27-01-2015, 06:58 PM
redbang Anyone actually used one or... 28-01-2015, 06:12 AM
Trevs I have a carbon 15 and have... 28-01-2015, 07:53 AM
Jexla I run keymod on my AR's rail... 27-02-2015, 05:10 PM
anderset20 Yeah see I have a quad rail... 27-02-2015, 06:36 PM
Jexla I also use those brownells... 27-02-2015, 07:55 PM
steven 5 rnd? teflon? 03-03-2015, 09:42 AM
steven 556 cases to avoid, FNM... 03-03-2015, 09:44 AM
Jexla I took that comment back,... 03-03-2015, 05:39 PM
huntingkiwi Jexla what type of issues did... 03-03-2015, 10:07 PM
Jexla Failure to feeds, misfeeds. 04-03-2015, 09:15 PM
huntingkiwi I've had issues with four of... 27-02-2015, 08:06 PM
Jexla What issues? Failure to feed? 27-02-2015, 09:24 PM
huntingkiwi Yep that's it.. I was... 27-02-2015, 09:36 PM
Jexla I've only used mine a handful... 27-02-2015, 09:47 PM
anderset20 That bugger moment when your... 27-02-2015, 11:03 PM
dfmaisey FYI, the new SileNZ carbine... 03-03-2015, 07:51 AM
res Lol Murphy strikes again!... 28-02-2015, 12:23 AM
anderset20 Yeah pissed me off haha ... 28-02-2015, 08:54 AM
gimp I've been using a DPT can... 28-02-2015, 09:14 AM
specweapon Me too, just end up with... 04-03-2015, 08:35 AM
anderset20 Yeah i sorta wondered that.... 28-02-2015, 09:17 AM
anderset20 Has anyone cut down their AR... 28-02-2015, 10:56 PM
res You will still have 7" of... 28-02-2015, 11:37 PM
gimp what if he's got a middy (he... 28-02-2015, 11:42 PM
res From posts he has put up we... 01-03-2015, 02:15 AM
anderset20 That's what I'm after. Cheers... 01-03-2015, 07:14 AM
anderset20 Ok someone help me decide... 01-03-2015, 09:14 AM
PERRISCICABA I haven't shoot as much i... 03-03-2015, 04:25 PM
Banana 12.37 01-03-2015, 05:16 PM
anderset20 Keymod 12.37 is $60 more and... 01-03-2015, 05:39 PM
Banana Standard 12.37? 01-03-2015, 06:14 PM
anderset20 Just a case of what's in... 01-03-2015, 06:55 PM
Jexla So I used those Brownell mags... 02-03-2015, 09:42 PM
steven So you are the 3rd or 4th... 03-03-2015, 09:52 AM
Daggers_187 I have a midlength that's cut... 03-03-2015, 08:24 AM
anderset20 Mines getting cut down today... 03-03-2015, 08:28 AM
steven recommended small rifle... 03-03-2015, 09:54 AM
ubique Has anyone else had issues... 03-03-2015, 12:19 PM
dirtyhabit Yep Ive had to do a bit of... 03-03-2015, 04:20 PM
hanse Been wondering lately what... 07-03-2015, 11:39 AM
anderset20 AR Thread 18-03-2015, 07:46 PM
Banana Tried 3 of the Brownells 5... 14-04-2015, 06:58 PM
steven Brownells sent me 4... 15-04-2015, 04:58 PM
steven Looking for recommendations... 17-04-2015, 11:03 AM
Beavis Midwest Industries from... 17-04-2015, 12:56 PM
ubique + 1 the midwest is very... 17-04-2015, 01:14 PM
dogmatix I stayed away form the... 17-04-2015, 01:18 PM
Konev got the adjustable gas block... 17-04-2015, 11:42 PM
anderset20 http://images.tapatalk-cdn.com... 19-04-2015, 08:16 PM
StrikerNZ It's a nice range of hills... 19-04-2015, 08:45 PM
anderset20 Nailed the one I did see on... 19-04-2015, 08:50 PM
PERRISCICABA Hello everyone, hope the... 26-04-2015, 07:46 PM
steven Heavier buffers are for M4s... 27-04-2015, 12:53 PM
Banana They're for any AR with a... 27-04-2015, 07:41 PM
PERRISCICABA My options for heavy buffer... 26-04-2015, 07:59 PM
Banana A rifle buffer (that you... 26-04-2015, 08:37 PM
stumpy I hear my spring every shot... 27-04-2015, 11:34 AM
mikee no its not meant to be quiet,... 27-04-2015, 12:23 PM
Natatale Im looking at getting a... 27-04-2015, 12:53 PM
308 Pull ya spring out, get a... 27-04-2015, 01:26 PM
mikee or take off your muffs, you... 27-04-2015, 02:05 PM
dogmatix +1 First thing I did when... 14-05-2015, 01:07 AM
PERRISCICABA Guys, thank you heaps for all... 28-04-2015, 12:15 AM
cambo Here's a great way to sight... 13-05-2015, 07:38 PM
MassiveAttack Any opinions or... 22-05-2015, 04:43 PM
300CALMAN The one you have chosen is... 22-05-2015, 07:57 PM
Konev Can happily confirm that... 23-05-2015, 03:39 PM
steven Q, reading about the long... 23-05-2015, 09:10 AM
Koshogi Service Rifle shoot long... 23-05-2015, 06:24 PM
steven Not much past 100yds. Though... 28-05-2015, 01:19 PM
ebf Nope steven, you need to... 31-05-2015, 04:54 PM
steven Well if you want cheap... 23-05-2015, 09:16 AM
steven What are Good 7rnd Ar15 mags... 28-05-2015, 01:17 PM
steven Some load testing yesterday,... 30-05-2015, 05:17 PM
steven The proposed new (600yd?)... 31-05-2015, 04:56 PM
ebf Wainui plan is still ticking... 31-05-2015, 05:09 PM
steven Roger, I am in no hurry right... 31-05-2015, 05:15 PM
res The owner of the farm over... 31-05-2015, 07:42 PM
steven "Doc watsons is a fantastic... 02-06-2015, 01:34 PM
steven drool... M16 lower, US... 02-06-2015, 01:27 PM
res That's the place, I found... 02-06-2015, 01:58 PM
Dan Hey team, I'm thinking of... 07-06-2015, 11:32 AM
Beaker What town you in? Ie you can... 07-06-2015, 10:22 PM
Banana vise hammer standard pin... 07-06-2015, 08:12 PM
300CALMAN http://www.brownells.com/gunsm... 07-06-2015, 10:17 PM
Dan Cheers guys - simpler than I... 08-06-2015, 09:59 AM
Beaker No prob. 08-06-2015, 12:50 PM
Banana 60 round pmag :D ... 11-06-2015, 07:02 PM
300CALMAN A true "Banana" Mag! Would... 11-06-2015, 10:00 PM
R93 Anyone have a Sig 516? ... 11-06-2015, 07:21 PM
Beavis SIG 516 CQB - On-Target Ltd... 11-06-2015, 08:15 PM
R93 Was thinking of a patrol and... 11-06-2015, 08:23 PM
Beavis Sig Sauer 516 Patrol | Trade... 11-06-2015, 10:26 PM
R93 Already watching but rather... 11-06-2015, 10:45 PM
300CALMAN If only you could get SIG... 11-06-2015, 10:29 PM
Beavis I think Sig's been banned... 11-06-2015, 10:36 PM
R93 Yup they have been but will... 11-06-2015, 10:46 PM
steven Looking at buying a bare... 23-06-2015, 03:06 PM
steven Looking at buying a complete... 23-06-2015, 03:09 PM
slobster I don't know if this thread... 05-07-2015, 03:19 PM
grunzter AR threads never die! 05-07-2015, 03:52 PM
Beavis There are heaps of guys down... 05-07-2015, 09:23 PM
steven I would disagree here after a... 28-07-2015, 08:43 PM
Beavis Probably two parts on the... 28-07-2015, 09:30 PM
Spoon AYE 21-07-2015, 11:36 PM
Savage1 Just subscribe to it, or make... 22-07-2015, 12:07 AM
Savage1 $1399 for a brand spanking... 28-07-2015, 08:32 PM
gimp considering how awful the SL8... 28-07-2015, 08:35 PM
300CALMAN well done Digit a new record... 28-07-2015, 08:38 PM
steven Yeah that is an awesome price... 28-07-2015, 08:45 PM
Digit Wait to you see the 308s 28-07-2015, 08:55 PM
Savage1 What've you got coming?... 28-07-2015, 09:05 PM
Vapour How far away? 29-07-2015, 02:20 PM
mcche171 Christ digit. You had me sold... 28-07-2015, 10:40 PM
Spoon Don't piss around with an... 28-07-2015, 11:40 PM
mcche171 I told her I was willing to... 28-07-2015, 11:50 PM
Glu Told my wife I didn't believe... 29-07-2015, 09:21 AM
Tommy I've been telling my missus... 29-07-2015, 09:54 AM
Ryan Tommy and still no AR *sob*. 29-07-2015, 04:18 PM
steven I'd like to see this a sticky... 29-07-2015, 10:03 AM
dogmatix Good to hear Digit. I gave... 29-07-2015, 10:34 AM
steven Not Brownells but the State... 29-07-2015, 01:17 PM
steven reviews, lots on youtube, ... 29-07-2015, 03:04 PM
steven Digit 308w chamber or... 29-07-2015, 03:42 PM
mcche171 so dpms 308? Any model... 29-07-2015, 03:46 PM
Happy Does any one know if any... 14-08-2015, 05:55 PM
PERRISCICABA WOW!!! Happy, i love your... 14-08-2015, 06:10 PM
Happy Oooops has a Vortex PST 6x24... 14-08-2015, 06:26 PM
res Never heard of such a thing,... 14-08-2015, 10:40 PM
specweapon Very easy to tap a grub screw... 14-08-2015, 11:31 PM
Beavis ARMS make or made them.... 14-08-2015, 10:50 PM
res They still make them, I have... 14-08-2015, 11:05 PM
res Very true, and have done it... 15-08-2015, 12:06 AM
Koshogi Case? Just break it in... 15-08-2015, 01:38 AM
res That won't work for happy as... 15-08-2015, 12:25 PM
trav any one got a 12.5 ar15... 15-08-2015, 05:29 PM
PERRISCICABA As an AR thread, does anyone... 15-08-2015, 05:41 PM
Timmay Perfect thread to ask this... 15-08-2015, 07:14 PM
Beavis I can tell you with max .223... 15-08-2015, 10:50 PM
Timmay cheers mate, dropping it to... 16-08-2015, 12:14 PM
300_BLK Anyone got an A2 birdcage... 16-08-2015, 09:37 PM
MassiveAttack 50fps per inch is the general... 21-08-2015, 10:27 AM
Vapour For what type handguard or... 16-08-2015, 09:10 AM
PERRISCICABA GiDay Vapour, It is to fit a... 16-08-2015, 11:25 PM
Beaker Think i have one, chinese... 16-08-2015, 11:32 PM
PERRISCICABA Thank you a lot! Pm sent. 17-08-2015, 12:15 AM
anderset20 I know someone with a RRA... 15-08-2015, 07:16 PM
Beavis Standard barrel as in? 15-08-2015, 10:51 PM
anderset20 Just a 16/14.5 inch chrome... 15-08-2015, 11:22 PM
Beavis PM sent 16-08-2015, 12:40 AM
300CALMAN Anyone have a milspec carbine... 16-08-2015, 01:22 AM
steven Anderson BCG for $99.99USD, ... 21-08-2015, 10:23 AM
Banana A BCG is a restricted part,... 21-08-2015, 05:28 PM
steven Banana I emailed Brownells to... 24-08-2015, 09:40 AM
Banana It was Rainier Arms that told... 24-08-2015, 04:22 PM
Kurt I bought 2 from brownells in... 24-08-2015, 01:25 PM
Banana ......and Brownells are... 21-08-2015, 05:33 PM
300CALMAN come on how do you know?... 21-08-2015, 07:39 PM
huntingkiwi Banana does that include... 21-08-2015, 07:17 PM
Banana Shipped a box of pmags this... 21-08-2015, 07:56 PM
300CALMAN Cool looks like pmags are... 21-08-2015, 10:09 PM
steven Bugger cancelled it. 21-08-2015, 08:24 PM
300CALMAN yep barrels, uppers, lowers... 21-08-2015, 10:08 PM
300CALMAN Pity about the stocks, I was... 21-08-2015, 10:12 PM
Beavis BCG's don't or didn't if... 21-08-2015, 10:10 PM
anderset20 Ah dam would've jumped on the... 21-08-2015, 11:46 PM
anderset20 Are you putting an order in... 22-08-2015, 09:45 AM
300CALMAN Cant get too many anderset20... 22-08-2015, 12:12 PM
308 FWIW I picked up a hard case... 07-10-2015, 09:16 AM
anderset20 Anyone got a spare adjustable... 24-08-2015, 07:27 PM
Banana If you buy me one of these,... 24-08-2015, 08:40 PM
Guest so are the rangers a piece of... 01-10-2015, 06:45 AM
anderset20 I had one and yes it was... 01-10-2015, 06:48 AM
steven I think Rangers are... 01-10-2015, 07:47 AM
Guest That stock is one of the... 01-10-2015, 10:11 AM
Tommy I've handled one and it feels... 01-10-2015, 10:38 AM
Digit We have the Core15 in stock... 01-10-2015, 10:16 AM
cambo What gun bags are being used... 06-10-2015, 09:51 PM
Kscott Sigh... as I hang my head in... 06-10-2015, 09:55 PM
cambo Cheers. I'll check them out. 06-10-2015, 09:58 PM
cambo Not after really a hard case.... 08-10-2015, 06:59 PM
Simo Anyone brought a scope in... 13-10-2015, 09:34 PM
res I have bought about ten... 13-10-2015, 10:26 PM
Simo Hey RES thanks for that -... 14-10-2015, 01:54 PM
Beavis Brownells don't ship any... 14-10-2015, 02:06 PM
grunzter Simo, US350 x 1.5 FX x 1.15... 14-10-2015, 07:40 PM
Simo Organised one today after the... 14-10-2015, 11:30 PM
Simo Checked this out yesterday at... 16-10-2015, 11:04 AM
res Another option is the lucid... 16-10-2015, 02:04 PM
Simo Bought a Lucid P7 after a lot... 10-11-2015, 09:01 PM
res It would be cool if you could... 10-11-2015, 09:40 PM
Simo Had a shot a week ago with... 29-11-2015, 09:30 PM
Greenie I'm interested in this... 04-12-2015, 09:22 PM
grunzter My mate ANTMAN just bought... 16-10-2015, 06:22 PM
Simo Just bought a Lucid P7 4x -... 16-11-2015, 03:30 PM
steven What are ppls thoughts on... 07-11-2015, 10:53 AM
res 6 of one and half a dozen of... 07-11-2015, 04:54 PM
Beavis My HD7 died ages ago and is... 10-11-2015, 10:26 PM
res Not a warranty issue? Or to... 10-11-2015, 10:51 PM
Beavis Emailed the company owner, no... 13-11-2015, 06:18 PM
res Where did you buy it from?... 13-11-2015, 06:21 PM
furstimer Tacking onto the Lucid... 11-11-2015, 05:40 PM
mawzer308 Here is my AR, NEA 12.5... 13-11-2015, 01:17 PM
Beavis I bought it off webyshops but... 13-11-2015, 06:39 PM
Jimmynostars So, giving up smoking (again)... 22-11-2015, 08:02 PM
Glycerine under a hundy USD, simple as... 23-11-2015, 11:57 AM
steven I suggest you pick the... 23-11-2015, 01:21 PM
IngloriousFame mawzer308 do those NEA... 26-11-2015, 10:10 AM
mawzer308 Yes the NEA come threaded,... 27-11-2015, 06:24 PM
MassiveAttack I have an AR question. I... 26-11-2015, 04:07 PM
grunzter Does it lock the bolt back... 26-11-2015, 05:35 PM
MassiveAttack Yes bolt locks back on empty... 30-11-2015, 09:14 AM
Jimmynostars Great info so far... 26-11-2015, 06:03 PM
Jexla Try put an enhance magpul... 30-11-2015, 02:27 PM
MassiveAttack Any idea where I get one... 30-11-2015, 02:48 PM
Jexla https://nzar15.com/store/magaz... 04-12-2015, 09:49 PM
steven "Have I restricted the gas... 30-11-2015, 03:11 PM
steven 47744477434774547746Finally... 02-04-2016, 07:44 PM
Rushy Very nice. Did you make that... 03-04-2016, 06:41 AM
steven No its from the USA ironwood... 03-04-2016, 07:31 PM
res That's awesome Steven, very... 03-04-2016, 05:35 PM
res http://uploads.tapatalk-cdn.co... 03-04-2016, 05:38 PM
Tommy What's the optic? 03-04-2016, 06:21 PM
res Elcan Spector os 4x 03-04-2016, 06:23 PM
steven What I dont know yet is if it... 03-04-2016, 07:32 PM
Chur Bay 47834 47835 Got these... 03-04-2016, 09:01 PM
keen fella Are you going to have a new... 02-11-2012, 04:51 PM
cambo Ummmmmmm If I win lotto yes.... 02-11-2012, 06:20 PM
redbang Administrators, can we have... 21-07-2015, 07:58 PM
300CALMAN +1 AYE 21-07-2015, 11:47 PM
  1. #1
    Member cambo's Avatar
    Join Date
    Dec 2011
    Location
    Christchurch
    Posts
    2,174

    AR Thread

    Thought this might be a good idea to start a thread for others to post some pics, specs, build ups, experiences, recommendations etc that could give ideas for those AR newbies thinking of buying or building an AR.

    As a Newbie - I have absolutely no idea. (But I know someone that will help me, eh Muzr )
    Life is natures way of keeping meat fresh

 

 

Similar Threads

  1. what thread
    By madjon_ in forum Reloading and Ballistics
    Replies: 7
    Last Post: 04-10-2018, 08:27 AM
  2. Thread titles
    By veitnamcam in forum Questions, Comments, Suggestions, Testing.
    Replies: 4
    Last Post: 30-08-2012, 01:35 PM

Tags for this Thread

View Tag Cloud

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!