Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 16 to 22 of 22
Like Tree25Likes

Thread: Barrel chop

  1. #16
    Member
    Join Date
    Dec 2011
    Location
    Southern Alps
    Posts
    4,601
    From 24"to 18" barrel, my 308 165gr dropped about 300ft/s=50ft/s=1". 18inch drop at 300yds from 100ydszero.
    Name:  20230706_100514.jpg
Views: 127
Size:  41.3 KB
    Cold bore 2 shot group 300yds,18in drop in nor-west win left to right.No crony,drop is what it is to work out velocity.

  2. #17
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    3,070
    Greetings again @yogi,
    From my records 44 grains of AR2208 with the 150 grain Hornady in a Winchester case chronographed 2,560 fps in a 20" barrel. This would work out to 2,610 fps with your 45 grain load. Your load is 2 grains under max which is more limited by case capacity than pressure and you may struggle to get the full charge in your case but if you can 47 grains of AR2208 should give you about 2,710 fps or perhaps a little more. It seems that once the pressure drops below a certain point velocity drops at a faster rate. Your loads are only giving around 45,000 CUP or a little more where a full pressure load would develop between 50,000 and 52,000 CUP. Your Sierra Game King projectiles should be a good match for the Nosler BT used in the Hodgdon/ ADI data. I assume that the 159 grain is a typo. If you wanted to go to a different powder I would recommend AR2206H 45 grains of that should give 2,720 fps in your rifle and it will fit in the case better. 45.5 grains is book max. Work up using your chronograph though and expect around 80 fps loss below 24" data as you approach max loads. Or just go hunting with what you have, your choice.
    Regards Grandpamac.
    PS. My Chronograph is an Oehler 35P with a 4 foot screen spacing and has proved reliable for me.

  3. #18
    Member
    Join Date
    Dec 2011
    Location
    Southern Alps
    Posts
    4,601
    Quote Originally Posted by andyanimal31 View Post
    My 308 at 16.5 inches doing 2540 with 168 eldm.
    It still flattens deer at 600 so don't over think it.

    Sent from my SM-A226B using Tapatalk
    Hi,you must reload for that velocity from a 16inch barrel.

  4. #19
    Member
    Join Date
    Jun 2014
    Location
    CNI
    Posts
    5,908
    @yogi. Ar2206h is a faster burn rate powder than 2208 and so a bit bettet suited to yr shorter bbl than 2208. The mv gain is likely to only about 120fps though. 2206h takes less space than 2208 so at around 45- 45.5 grains there should be no need for compression. Cheers mate.
    Summer grass
    Of stalwart warriors splendid dreams
    the aftermath.

    Matsuo Basho.

  5. #20
    Member andyanimal31's Avatar
    Join Date
    Dec 2011
    Location
    Makakahi road Raetihi
    Posts
    3,680
    Quote Originally Posted by Trout View Post
    Hi,you must reload for that velocity from a 16inch barrel.
    Yep, 2208 in lapua brass.
    Can't remember how much but can look it up if ya interested

    Sent from my SM-A226B using Tapatalk
    Trout likes this.
    My favorite sentences i like to hear are - I suppose so. and Send It!

  6. #21
    Member Fatberg's Avatar
    Join Date
    Aug 2021
    Location
    Auckland
    Posts
    349
    The barrel on my 308 is 14.6". After the barrel chop it definitely became fussier with ammo. After trial and error I found that it groups Fiocchi the best for some reason - could be that these are slightly less hot rounds? When I tested it on a chrono it was averaging 2500fps. At 200m I can can shoot about a 3-4" 5 shot group with it off a bipod and bag rest with a 9x scope. With some proper load development, maybe trying a faster burning powder etc, maybe that could be improved. For me it's just a bush gun anyway so being minute of deer at 200m is more than accurate enough.
    Trout likes this.

  7. #22
    Member yogi's Avatar
    Join Date
    Jul 2012
    Location
    Oamaru
    Posts
    252
    Thanks alot for the input. Certainly food for thought

    A couple of typos on the load.
    150gn sierra not 159
    46 grains 2208

 

 

Similar Threads

  1. Chop chop
    By FRST in forum Projects and Home Builds
    Replies: 3
    Last Post: 13-06-2019, 08:28 PM
  2. Do you really need a long barrel? Chop it or not?
    By tikka in forum Firearms, Optics and Accessories
    Replies: 30
    Last Post: 31-01-2017, 08:56 PM
  3. Chop a .243 ?
    By oneipete in forum Firearms, Optics and Accessories
    Replies: 11
    Last Post: 08-08-2016, 06:01 PM
  4. To chop or not to chop
    By Philipo in forum Firearms, Optics and Accessories
    Replies: 22
    Last Post: 12-03-2012, 07:43 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!