About to suppress my new Tikka T3 223. 535 mm barrel(21") what can I cut it down to with probs?
Printable View
About to suppress my new Tikka T3 223. 535 mm barrel(21") what can I cut it down to with probs?
What ever length you like Mate, just remember the more you cut off the slower it goes & the less the suppressor will like it :)Quote:
Originally Posted by Maca49
18" seems sensible for shorter work. It will bring it back to the same OAL with a 3 baffle DPT.
If your planning on using it for real long distance bunny smashing I would leave as is.
18" /300 metres , light projectiles, 1:8 barrel ok?
300 is a big call Would like to see that . Don't chop at all .
I have the same question for around 300 meters. But using 75 grain amaxQuote:
Originally Posted by Maca49
Sent from my SM-G900F using Tapatalk
18'll be heaps
Unless your hunting bunnies in the bush I'd leave it full length
You gotta have hope, you told me these were great little rifles???Quote:
Originally Posted by Happy
Have a good read of this Maca. Decide if the 100-75 fps is worth it for you.
223 Remington/5.56 NATO, velocity versus barrel length: A man, his chop box and his friend’s rifle | Rifleshooter.com
Thanks TimQuote:
Originally Posted by Timmay
I had a 200 fps loss from a 20" to 16" AR15 barrels with the same load...to be fair two different uppers but enough for me to sell the 16" one.
well mines 12.5 but thats cause if Im likely to shoot longer than 150-200m Ill take another rifle
bear in mind what bullet you will run If its a 55grain soft point with a flat base 25grains of powder wont push it far enough to do anything spectacular beyond that anyway
yea they are fucken loud without a suppressor at that lenght
At that twist rate you'll find it probably shoots straighter w heavier pills. I use factory 63gr in mine, but the chap I bought mine from raved about the accuracy with 75gr pills. They didn't fit in the mag though.
My model 7 223 has an 18" tube. Had a play for fun at 400 yds the other day. 55gr SGK handloads did a 2" group on my gong. Could hardly hear the plate ring, but it'd still nail bunny's etc at that range with 350 ft lbs of energy. 17hmr at 150 yds only has 98 ft lbs and that flattens bunnies at 150.
Sent from my SM-G900I using Tapatalk
Thinking Ill lop 2" of from 21"- 19" did my HMR at that and it performed well, just need it a little shorten with an over barrel can. Thanks for the input!:cool:
My 1 in 8 18" does 300 on rabbits with 77smk. It was a 22"-losing 4" make the rifle handle better and it's hardly effected my real word bunny distance
Good decision. Can easily get caught up worrying about 50fps or so when at the end of the day its the difference between 3200 and 3150 :ORLY: