Thread: Barrel paint

I love super etch as a coating, like MCCPRO I also use it at work & have used on rifles before

The trick like all "etch coatings" is to apply many light coats, it dries quick so can get it done over a reasonable short time, Wattyl SE black has a great finish & levels out well, even a novice can get good results.

It's not super hard like a 2pack so won't last forever but is easy to recoat / blend & if needed can be easily removed with Methylated Sprits

Originally Posted by Philipo

I love super etch as a coating, like MCCPRO I also use it at work & have used on rifles before

The trick like all "etch coatings" is to apply many light coats, it dries quick so can get it done over a reasonable short time, Wattyl SE black has a great finish & levels out well, even a novice can get good results.

It's not super hard like a 2pack so won't last forever but is easy to recoat / blend & if needed can be easily removed with Methylated Sprits

That's why I rate Duracote over the Cerakote systems. Yes Cerakote is technically a "more durable" system but it's not easily applied by the diy user, and once it's damaged it requires a full strip to reapply to spec.. Duracote can be re applied after a simple feather, keying and degreasing.

No practical coating is going to be more durable than firearms grade metal so use what works for you and make it as minimal maintenance as possible, IMO.

I'm going to give this super etch stuff a go as it's easier than setting up the spray guns and all the associated cleaning.