Thread: Best rim fire suppressor

Originally Posted by gundoc

That was one of mine. I made thousands of them from the 1970's until I retired in2012. I made two distinct models, the first having a rolled groove in the 7/8" tube to support the machined baffle chambers. They were marketed direct from me (WCG, Woods Custom Guns) and also by Winchester. The second model had three rolled baffles and a spring in a 28mm tube, sold direct from me and also Gun City. The first model was equal to the Parker Hale suppressor, but the second model was even better and was the quietest .22 muzzle can you could get. Firing in an open area gave nothing but the sound of the firing pin.

@gundoc just the straight tube. Done well with the rolling as I'd have guessed they were machined although that would've been a waste of material. Spring at the fore-end to take the shock up like a shock absorber.
If I was a bit lax at cleaning I sometimes had to, in a controlled manner of course, fire a round though it partially disassembled to get the last chamber out. It was an alloy jobbie and I was worried about garking the crap out of it and the tube.
As posted very happy with it and it would be nice to compare to my recently built ones. a bit longer as mine were mid over barrel ones, but a lot lighter as mine were all steel not alloy like the other one.
If I'd built a spare one id sent it to phillipo free as. Only cost him a beer next time he's down with ryan 270.
Ill have to have a count up-there might be one but as said a little heavy

Originally Posted by mudgripz

Greg Maniatis gunsmith in Chch makes some good ones - remember range testing them few years back. Can disassemble them and wash baffles. Nice little units and weren't too dear.

Greg 0274879611

I have one of these, quite slim and works really well.

Originally Posted by gundoc

That was one of mine. I made thousands of them from the 1970's until I retired in2012. I made two distinct models, the first having a rolled groove in the 7/8" tube to support the machined baffle chambers. They were marketed direct from me (WCG, Woods Custom Guns) and also by Winchester. The second model had three rolled baffles and a spring in a 28mm tube, sold direct from me and also Gun City. The first model was equal to the Parker Hale suppressor, but the second model was even better and was the quietest .22 muzzle can you could get. Firing in an open area gave nothing but the sound of the firing pin.

Think I have one of your second model on my Marlin semi.

Originally Posted by gundoc

That was one of mine. I made thousands of them from the 1970's until I retired in2012. I made two distinct models, the first having a rolled groove in the 7/8" tube to support the machined baffle chambers. They were marketed direct from me (WCG, Woods Custom Guns) and also by Winchester. The second model had three rolled baffles and a spring in a 28mm tube, sold direct from me and also Gun City. The first model was equal to the Parker Hale suppressor, but the second model was even better and was the quietest .22 muzzle can you could get. Firing in an open area gave nothing but the sound of the firing pin.

Rod is this you? Hope you are well. This man needs no introduction. Best in the business especially when he has free rein to tell his stuff in High places. LOL.

Originally Posted by TeRei

Rod is this you? Hope you are well. This man needs no introduction. Best in the business especially when he has free rein to tell his stuff in High places. LOL.

Tis me, but who dat say who dat?

Originally Posted by gundoc

Tis me, but who dat say who dat?

The useless huas in suits who need help from the worlds best expert.

Q. Do you challenge what Mr Woods has said about the discharge of the firearm.

A. [Crown expert] Aah no. I did not consider that. Mr Woods conclusions are certainly valid.

The ASE rimfire can is the best I reckon, it is the only rimfire suppressor that will suppress the first shot from my ruger mk2 pistol, all others will have a first round crack as the oxygen is burnt up.

Is that the aluminium ECO model?
Are they easy to open up for cleaning?

Originally Posted by Gun nut

The ASE rimfire can is the best I reckon, it is the only rimfire suppressor that will suppress the first shot from my ruger mk2 pistol, all others will have a first round crack as the oxygen is burnt up.

Hi, I would believe you have our DUAL rimfire suppressor? That is pretty much the quietest .22 suppressor in pistol use that is available.

Our new ECO model is pretty good, on rifle barrels it is equal to the DUAL, but loses several dB on the pistol.

Best Regards!

Tuukka Jokinen
Ase Utra sound suppressors

Originally Posted by Tuukka

Hi, I would believe you have our DUAL rimfire suppressor? That is pretty much the quietest .22 suppressor in pistol use that is available.

Our new ECO model is pretty good, on rifle barrels it is equal to the DUAL, but loses several dB on the pistol.

Best Regards!

Tuukka Jokinen
Ase Utra sound suppressors

Are both the ECO and Dual models easy to dissemble for cleaning?
How often do you recommend they are cleaned when shooting 22lr?

Originally Posted by Beetroot

Are both the ECO and Dual models easy to dissemble for cleaning?
How often do you recommend they are cleaned when shooting 22lr?

Hi, the ECO is much simpler in design with only three parts.

However we do recommend taking both models apart after a few hundred rounds. Also as people know, some rimfire ammunition produce more fouling than others.


Best Regards!

Tuukka

Originally Posted by Tuukka

Hi, the ECO is much simpler in design with only three parts.

However we do recommend taking both models apart after a few hundred rounds. Also as people know, some rimfire ammunition produce more fouling than others.


Best Regards!

Tuukka

@Tuukka
How are they disassembled? A threaded end cap that contains the inner parts?
What products do you recommend to clean the internals with?

Originally Posted by Tuukka

Hi, I would believe you have our DUAL rimfire suppressor? That is pretty much the quietest .22 suppressor in pistol use that is available.

Our new ECO model is pretty good, on rifle barrels it is equal to the DUAL, but loses several dB on the pistol.

Best Regards!

Tuukka Jokinen
Ase Utra sound suppressors

Yeah mate, I have the DUAL rimfire, best quality rimfire suppressor on the market, a little pricey but anyone who says another 22lr suppressor is more effective probably hasn't tried it. Its biggest downside is it's on the weighty side for a rimfire can.

Cheers for the intel boys, food for thought

Originally Posted by Philipo

Cheers for the intel boys, food for thought

No prob. Oil filter will be waiting for you at `The bay`

Tried quite a few on my rimfires. Always gone back to Gunworks. The best, simple