Thread: Blaser barrel pillar issues

Well it's going to gunworks on Monday but wondering if any of you have experienced similar.

Bought a r93, one of the threaded pillars that usually stay in barrel was stuck in stock, barrel still tightened up fine etc

Got the pillar out after taking ththe chasis apart, put some lock tight on it and threaded back into barrel so both pillars stayed on barrel as they should

Have just got another barrel and went to put it on, sure enough when I did it the pillar on original barrel stayed in stock... have just taken it all apart and the threads don't look flash where it screws into barrel, see photo.

Thoughts on what to do?