Thread: Blaser Q's & A's

Originally Posted by R93

I am no use to you Happy as I do not own a factory barrel anymore.

Good to see your obliging as far as Maca is concerned.😆

If you have to be gay to own a blaser, I wanna be the daddy😆

Reminds me of a joke

New guy on jail sharing a cell with a big bald scared scary looking weapon pf a man. He says " your gonna be hete somr time do you want to br the mommy or the daddy? "
Thinking quickly he says " daddy"

"Righto" says his cell mate . "Get over here and suck mommas cock "

Now I am conflicted😊

Originally Posted by R93

Now I am conflicted

You'd rather be the hammer than the nail

Originally Posted by kiwijames

My 7-08 is cut to 18.5" (or was it 19?). Standard profile barrels in M cal are same/same IIRC, just different hole through the guts. Still accurate as hell, lost about 150fps from factory. Way better shorter.

Thanks that's the answer.. If it was a Tikka it d be 12" and who cares but two at once I need to do the right thing if possible.

Originally Posted by Happy

Thanks that's the answer.. If it was a Tikka it d be 12" and who cares but two at once I need to do the right thing if possible.

The right thing to do considering the blaser is so short anyhow is probably to leave factory length.


Sent from my iPhone using Tapatalk

Doesn't a blaser barrel cost like $1500? Why not just buy a $15 bush for the suppressor and have them at whatever length you want . Seems pointless to cut two perfectly good barrels down just so you can save the 10 seconds it takes to change the rear bush??? I would cut the 308 as short as possible and leave a bit of length in the 6.5.
But on saying that if it was me I wouldn't have those two calibres.

My ideal blaser set up would be a r93 with carbon stock.
7mm rem mag
Cut down 308 with a dpt modular
Full length 223 with dot modular.

I think I just talked myself into a lot of money....

Originally Posted by PerazziSC3

Why not just buy a $15 bush for the suppressor and have them at whatever length you want . Seems pointless to cut two perfectly good barrels down just so you can save the 10 seconds it takes to change the rear bush??? I would cut the 308 as short as possible and leave a bit of length in the 6.5.

What he said, I'd leave the 6.5 at factory length.

Originally Posted by PerazziSC3

Doesn't a blaser barrel cost like $1500? Why not just buy a $15 bush for the suppressor and have them at whatever length you want . Seems pointless to cut two perfectly good barrels down just so you can save the 10 seconds it takes to change the rear bush??? I would cut the 308 as short as possible and leave a bit of length in the 6.5.
But on saying that if it was me I wouldn't have those two calibres.

My ideal blaser set up would be a r93 with carbon stock.
7mm rem mag
Cut down 308 with a dpt modular
Full length 223 with dot modular.

I think I just talked myself into a lot of money....

7mm Rem Mag or 300 Win Mag ?? Which would be better long range ?

Or 300 blaser mag

Originally Posted by outdoorlad

What he said, I'd leave the 6.5 at factory length.

Cheers Think Ill just lose a little on both to lose the front sight screw holes and no don't want to change bushes on suppressors
I do that on other guns and its ok but not this time... DPT Over Barrel on the way ...

Originally Posted by Happy

7mm Rem Mag or 300 Win Mag ?? Which would be better long range ?

Similar I reckon. I like the sound a rem mag with the Amax or even 180 Berger.

If I was hunting moose or bears then 300win mag all the way!

338LM, burning money anyway so all in!

So we decided this fatty needed some liposuction



@shift14

before and after?

Forgot to take a before haha. But here's a comparison between the machined blaser and the eBay one.