Blaser Q's & A's

Printable View

Show 40 post(s) from this thread on one page

14-04-2015, 08:10 PM
veitnamcam

What exacty is that scale reading? I cant work it out it appears to me to be 6.1.5grams? :wtfsmilie:
14-04-2015, 08:17 PM
BRADS

Quote:

Originally Posted by outdoorlad

Does he do R93 stocks?

Senator Stocks do.

Sent from my iPhone using Tapatalk
14-04-2015, 08:17 PM
Barefoot

I would say 6lb 1.5oz
14-04-2015, 08:23 PM
Barefoot

Quote:

Originally Posted by BRADS

Senator Stocks do.

Has Jason actually made one?
14-04-2015, 08:26 PM
BRADS

Blaser Q's & A's

Quote:

Originally Posted by Barefoot

Has Jason actually made one?

Yes I believe he has.

Sent from my iPhone using Tapatalk
14-04-2015, 08:48 PM
Dreamer

Quote:

Originally Posted by outdoorlad

Does he do R93 stocks?

Yeah mate he does.

Sent from my iPhone 6 using Tapatalk
14-04-2015, 09:16 PM
Fubar

Quote:

Originally Posted by 300winmag

Not me - but I did give Shift 14's a stroke last week and liked what I felt,

Mhmm
14-04-2015, 09:24 PM
6mm ackley

Sounds doggy :wtfsmilie:
14-04-2015, 09:31 PM
longrange308

glad i wasnt the only one thinking that
06-05-2015, 10:14 PM
Happy

Quick question @R93 @BRADS @gimp @anyone. I have 308 barrel plus 6.5 x55 want to use one suppressor for both so shorten both barrels to same length . Suppressor is DPT over barrel What would be the optimum length as both need to be identical??

Any help welcome

Cheers
06-05-2015, 10:22 PM
veitnamcam

Optimum length for a 308 would be around 40 inches.
06-05-2015, 10:26 PM
Gibo

Bwah ha ha!!!
06-05-2015, 10:28 PM
veitnamcam

Quote:

Originally Posted by Gibo

Bwah ha ha!!!

Mate for a rem mag it would be more like 50 inches!
06-05-2015, 10:31 PM
Happy

Bwah ha ha !!!
06-05-2015, 10:32 PM
longrange308

Quote:

Originally Posted by Happy

Quick question @R93 @BRADS @gimp @anyone. I have 308 barrel plus 6.5 x55 want to use one suppressor for both so shorten both barrels to same length . Suppressor is DPT over barrel What would be the optimum length as both need to be identical??

Any help welcome

Cheers

why do they have to be the same length
06-05-2015, 10:33 PM
Gibo

Quote:

Originally Posted by veitnamcam

Mate for a rem mag it would be more like 50 inches!

Lucky i have my 40" 308 then ;)
06-05-2015, 10:35 PM
Happy

Now that rubbish is out of the way a helpful knowledgeable answer may appear as I d seriously like to send two barrels one suppressor away to get modded
06-05-2015, 10:35 PM
Happy

Quote:

Originally Posted by longrange308

why do they have to be the same length

Suppressor bush diameter to suit both
06-05-2015, 10:37 PM
veitnamcam

Conventional thought would call optimum length whatever length yielded the highest velocity.

What is your personal description of optimum length ?
06-05-2015, 10:43 PM
longrange308

have we measured the barrels to see how different the dia's are???
06-05-2015, 10:46 PM
Happy

Long enough to retain good accuracy related to the caliber but as short as possible as well to make it nice to carry with the suppressor fitted.
06-05-2015, 10:46 PM
Happy

Quote:

Originally Posted by longrange308

have we measured the barrels to see how different the dia's are???

Same profile all the way Cheers
06-05-2015, 10:47 PM
Sidney

Why does this weird idea persist that barrel length has something to do with accuracy?
06-05-2015, 10:48 PM
veitnamcam

The way I see it you have a few choices....
factory length
shortened so factory length with can on.
as short as possible without interfering with stock.
As short as you can legally run and bugger the stock if it is in the way.
06-05-2015, 10:51 PM
Happy

Quote:

Originally Posted by Sidney

Why does this weird idea persist that barrel length has something to do with accuracy?

I m only asking in case there's a sweet spot and someone says hey I Ve been there and 20 inches is a sweet spot for both or 19 or whatever or there isn't a sweet spot because I'm not sure !

Cheers
06-05-2015, 10:56 PM
veitnamcam

Quote:

Originally Posted by Happy

I m only asking in case there's a sweet spot and someone says hey I Ve been there and 20 inches is a sweet spot for both or 19 or whatever or there isn't a sweet spot because I'm not sure !

Cheers

Just cut it so the muffeler clears the stock and be done with it.
06-05-2015, 11:04 PM
Maca49

VC your a fucken genius! It won't make any difference to Happys shooting! Gotta say I could become gay and own a BLASER after playing with Happys:O_O:
06-05-2015, 11:09 PM
mikee

Quote:

Originally Posted by Maca49

VC your a fucken genius! It won't make any difference to Happys shooting! Gotta say I could become gay and own a BLASER after playing with Happys:O_O:

If there are 2 ways you could read the above then I read it the WRONG way :)
06-05-2015, 11:09 PM
kiwijames

My 7-08 is cut to 18.5" (or was it 19?). Standard profile barrels in M cal are same/same IIRC, just different hole through the guts. Still accurate as hell, lost about 150fps from factory. Way better shorter.
06-05-2015, 11:18 PM
R93

I am no use to you Happy as I do not own a factory barrel anymore.

Good to see your obliging as far as Maca is concerned.😆

If you have to be gay to own a blaser, I wanna be the daddy😆
06-05-2015, 11:30 PM
veitnamcam

Quote:

Originally Posted by R93

I am no use to you Happy as I do not own a factory barrel anymore.

Good to see your obliging as far as Maca is concerned.😆

If you have to be gay to own a blaser, I wanna be the daddy😆

Reminds me of a joke

New guy on jail sharing a cell with a big bald scared scary looking weapon pf a man. He says " your gonna be hete somr time do you want to br the mommy or the daddy? "
Thinking quickly he says " daddy"

"Righto" says his cell mate . "Get over here and suck mommas cock "
06-05-2015, 11:33 PM
R93

Now I am conflicted😊
06-05-2015, 11:37 PM
7mmsaum

Quote:

Originally Posted by R93

Now I am conflicted[emoji4]

You'd rather be the hammer than the nail :)
07-05-2015, 09:50 AM
Happy

Quote:

Originally Posted by kiwijames

My 7-08 is cut to 18.5" (or was it 19?). Standard profile barrels in M cal are same/same IIRC, just different hole through the guts. Still accurate as hell, lost about 150fps from factory. Way better shorter.

Thanks that's the answer.. If it was a Tikka it d be 12" and who cares but two at once I need to do the right thing if possible.
07-05-2015, 10:05 AM
BRADS

Quote:

Originally Posted by Happy

Thanks that's the answer.. If it was a Tikka it d be 12" and who cares but two at once I need to do the right thing if possible.

The right thing to do considering the blaser is so short anyhow is probably to leave factory length.

Sent from my iPhone using Tapatalk
07-05-2015, 11:01 AM
PerazziSC3

Doesn't a blaser barrel cost like $1500? Why not just buy a $15 bush for the suppressor and have them at whatever length you want . Seems pointless to cut two perfectly good barrels down just so you can save the 10 seconds it takes to change the rear bush??? I would cut the 308 as short as possible and leave a bit of length in the 6.5.
But on saying that if it was me I wouldn't have those two calibres.

My ideal blaser set up would be a r93 with carbon stock.
7mm rem mag
Cut down 308 with a dpt modular
Full length 223 with dot modular.

I think I just talked myself into a lot of money....
07-05-2015, 11:17 AM
outdoorlad

Quote:

Originally Posted by PerazziSC3

Why not just buy a $15 bush for the suppressor and have them at whatever length you want . Seems pointless to cut two perfectly good barrels down just so you can save the 10 seconds it takes to change the rear bush??? I would cut the 308 as short as possible and leave a bit of length in the 6.5.

What he said, I'd leave the 6.5 at factory length.
07-05-2015, 12:11 PM
Happy

Quote:

Originally Posted by PerazziSC3

Doesn't a blaser barrel cost like $1500? Why not just buy a $15 bush for the suppressor and have them at whatever length you want . Seems pointless to cut two perfectly good barrels down just so you can save the 10 seconds it takes to change the rear bush??? I would cut the 308 as short as possible and leave a bit of length in the 6.5.
But on saying that if it was me I wouldn't have those two calibres.

My ideal blaser set up would be a r93 with carbon stock.
7mm rem mag
Cut down 308 with a dpt modular
Full length 223 with dot modular.

I think I just talked myself into a lot of money....

7mm Rem Mag or 300 Win Mag ?? Which would be better long range ?
07-05-2015, 12:18 PM
PerazziSC3

Or 300 blaser mag
07-05-2015, 12:19 PM
Happy

Quote:

Originally Posted by outdoorlad

What he said, I'd leave the 6.5 at factory length.

Cheers Think Ill just lose a little on both to lose the front sight screw holes and no don't want to change bushes on suppressors
I do that on other guns and its ok but not this time... DPT Over Barrel on the way ...

Show 40 post(s) from this thread on one page