Fellow blaser owners - Any need to lap your Blaser scope rings? Wanted to check before I mounted up my March Tactical scope.
Printable View
Fellow blaser owners - Any need to lap your Blaser scope rings? Wanted to check before I mounted up my March Tactical scope.
I expect the factory will have aligned the rings on the mount with typical German precision. But that may be more precise than your scope so if you want to, you could loosen the rings at the torx head screws under the mount and retighten once you have the scope in the rings. I had a spare mount apart once and those torx screws were loctite'd from the factory which is why I think they've already trued them.
I didn't, but was careful to check that assembly was perfect, which it seemed to be
Just put a March in a set of Talleys last week. It came from a Blaser saddle. No marks. Did need to lap the Talleys though. My Premier is in a Blaser saddle and I'm not at all worried it will be anything other than German precise.
Sweet one less thing to worry about :thumbsup: