Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator Gunworks


User Tag List

Results 1 to 15 of 22
Like Tree26Likes

Thread: Bolt Problems

Threaded View

  1. #4
    Member
    Join Date
    Nov 2014
    Location
    Central Otago
    Posts
    2,335
    Quote Originally Posted by DanS View Post
    Hey guys I have a Mossberg ATR 100 chambered in .243 around 5 years old with only max 60 rounds through it, recently something has happened to it and nothing comes to memory as to knocks or any thing on my end. When I half cock it, rifle has bolt phase of open, one click and fully closed, so when it is on one click/half cocked and I pull the trigger the bolt closes itself and the pin goes off. I fortunately have not had this happen with a live round in the spout. Found this occurring when I was cleaning the rifle. There is no rust on the bolt and it has always been regularly cleaned. Also there is nothing interfering with the action or the bedding. So basically am after any information as to why this is occurring. So just in summary when I have the bolt half cocked and pull the trigger 4/5 times the bolt slams shut and the pin goes off. Does not occur when safety is on. Also finally the bolt is solid when it is half cocked i.e. it locks strongly into place and does not move unwillingly.

    Thanks in advance for any info.
    That is perfectly normal on any bolt action. When the bolt handle is up in the half-bolt (not half-cocked as the striker is already at full cock) position, the striker is resting on the sear and the cam surface of the striker is resting on the bolt cam thus it sits there quite nicely. The moment you pull the trigger the sear drops (as it is designed to do) and the striker moves forward under spring pressure, camming the bolt closed. This will NOT fire a round as the firing pin energy is spent trying to close the bolt. You will have to raise and lower the bolt handle to recock the gun before you can fire it. The half-bolt position is a good way to carry your rifle in the final stages of a stalk when you can close the bolt silently as you are in a position to take the shot. Keep your finger outside the trigger guard while carrying like this and keep control of the bolt handle between your finger and thumb at all times. This prevents the bolt closing, and also prevents it falling open and losing the round when you might need it.
    DanS likes this.

 

 

Similar Threads

  1. Tikka T3 Bolt replacement - lost bolt
    By ning in forum Firearms, Optics and Accessories
    Replies: 159
    Last Post: 14-07-2015, 07:55 PM
  2. Always running into problems
    By Toby in forum Reloading and Ballistics
    Replies: 34
    Last Post: 28-06-2013, 01:58 AM
  3. X-Bolt, A-Bolt, Sako A7 or Tikka T3.
    By will16 in forum Firearms, Optics and Accessories
    Replies: 27
    Last Post: 15-06-2013, 06:22 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!