Thread: burris Zee rings and 0.010 inserts

https://www.google.com/url?sa=t&sour...-0wQm7pUAfgMjH
You can use a combination of the inserts. Like two 10s at 45 or 30 degrees going opposite ways. Ie. Front brings it down and to the left. Rear brings it down and to the right. It will be less than the total 20 but more than 10. It might take some minor adjustment of the angles to get it right.

Nope that makes sense.

Originally Posted by Nugget connaisseur

https://www.google.com/url?sa=t&sour...-0wQm7pUAfgMjH
You can use a combination of the inserts. Like two 10s at 45 or 30 degrees going opposite ways. Ie. Front brings it down and to the left. Rear brings it down and to the right. It will be less than the total 20 but more than 10. It might take some minor adjustment of the angles to get it right.

Nope that makes sense.

Perfect I’ll read that thru enough times till it sinks in.
I’m not trying to sort a miss alignment but I don’t quite have enough in the scope left before bottoming out for the total 20moa likely from using the 0.010 but I’d like to get as close to that as possible which is 5.4mil at most estimatingso most likely less


Sent from my iPad using Tapatalk