Anyone had experience with these suppressors?
https://www.trademe.co.nz/a/marketpl...ing/2954399716
Looks simple and robust.
Printable View
Anyone had experience with these suppressors?
https://www.trademe.co.nz/a/marketpl...ing/2954399716
Looks simple and robust.
They are just AliExpress specials...at over three times the price.
If you look on AliExpress you can pick these exact same suppressors up for 35-40 delivered.
Wonder how they perform?Quote:
Originally Posted by MrMatu
The american's use those "oil filters" have a gander. they seem to work well.Quote:
Originally Posted by Synthetic
NZ$ 9.91 36％ Off | Aluminum 12" 10" 6" Extension Spiral 1/2-20 1/2-28 5/8-24 M14*1 M14*1L Car Fuel Filter Car Solvent Trap for NAPA 4003 WIX 24003
https://a.aliexpress.com/_mqrzWsz
They call them oil filters to get around some of the restrictions in some states in the US.
I have one of the "oil filter" cans using the K baffles instead of a monocore. First shot and everything came loose, as the thin aluminum outer stretched both in length and width. Put it on the lathe again, and trued it up, and it's been fine since.
This was only shooting a 17 Hornet with a can with a much larger internal volume than the one on Trademe.
I'd think that you'll find the internal volume of the suppressor is seriously lacking, and as such the amount of suppression you will get will be disappointing.
Here is the exact suppressor you are looking at....and the result of it's 'will it perform or not' test?Quote:
Originally Posted by Synthetic
https://www.youtube.com/watch?v=lNsU1JCGlQk