just wondering how you guys clean the chamber area especially the area where the locking lugs engage at the rear of the chamber
Printable View
just wondering how you guys clean the chamber area especially the area where the locking lugs engage at the rear of the chamber
Use a cheap tool that holds a miniature tampon lookalike. Push in just past lugs engage area a rotate a few times. Got tool from Workshop Inno.
That area gets quite grubby on my F Class rifles if I don't clean regularly as I lubricate the locking lugs with moly every outing.
https://www.workshopinnovation.co.nz...=368628&cat=10
I did this just last week.
I removed the stock and then using brakleen fitted with a white nozzle extension, sprayed into the chamber area with the bolt removed and muzzle down resting on an old towel.
All the rubbish was flushed down the barrel and left the bolt lock area spotless.
I gave the outside metal areas a spray and wipe with crc as the brakleen turns the blues areas slightly white plus this provides some basic protection to areas hidden by the stock.
Cleaned the bore and then put the stock back on.
Done.
Sent from my iPhone using Tapatalk
I use stainless dentist tools to get in there. I got mine by asking a dentist for used tools being binned after use. They dispose of them regularly.
For the bolt lug recess I use a tool I got from Sinclairs.
It's the lower of the 3 shown on this page .
You have little felts you screw in but I have to cut them smaller to fit into my 3 lug action. It's obviously designed for a two lug bolt.
It's tight in my bolt race and an awkward thing to use. I couldn't really recommend it.
For my smaller action I use a small wire bottle brush (plastic bristles) with a 4x2 patch would over it. This oils dries and cleans the chamber and I bend the tip at right angles to clean the lug recesses.
Again, a rough and ready way to do it. There could easily be a good tool but I haven't seen it yet.
Thanks this is on bolt actions was thinking of bending a mop
You could just use a chamber brush which are available from most good gun shops (like a normal bronze brush but with a larger head)Quote:
Originally Posted by northdude
ok ive got one for 223 never seen them for other cals. My current 223 doesnt need cleaning in that area tho
Yep, bought the same from Sinclairs years ago but for my 3 lug Barnard it is a hopeless fit. Went with the Tipton from Workshop Inno and it fine. Only issue is the felts aren't well retained and if you are too vigorous they fall off inside the action.Quote:
Originally Posted by Bagheera
Hmm, something I’ve never managed to do on the Finnwolf - I’ll have to get creative..!
A flexible toothbrush also comes in useful...depending on receiver dimensions and configuration.
I was going to say chamber brush as well. I think mine is for ar10. kind of like a t shape brush. don't tell anyone I have a ar brush though.
Yea I just use a tooth brush with a small head and crc to flush
oooo thats a prohibited brushQuote:
Originally Posted by bully
I brought the tipton chamber cleaning kit from workshop innovation. it works really well.
Yeah, the felt tips on the Tipton are the way to go. You need something that absorbs the gunk and something that the gunk sticks to so you can then bring it out of the action. Brushes don't go as good a job of that.Quote:
Originally Posted by Tim Dicko
I occasionally stick my borescope in for a peek and the Tipton is quite effective.
Got a couple of cut down, cleaning rods, with a chamber size cotton mop, which I use a piece handy towel wrapped around to give the chamber and neck a hit. Depends on whether I have left product in the barrel, and which way up I have stored the rifle.
20gauge shotgun brush on part of a rod in the drill. Sometimes 12ga
Use an old Jones Custom Products action cleaning tool kit that I bought over thirty years ago. Takes the dental rolls for cleaning the lugs and includes a short rod that takes a bronze brush that you wrap the appropriate sized patch around to wipe out any oil from the chamber after barrel cleaning. Use a small jar of Pro Gold special anti gall grease for the locking lugs that contains enough to last ten lifetimes of heavy firearm use.
You lube the locking lugs?? Sacrilege.