Simple green in sonic cleaner works for me.
As mentioned it needs to be neutralised once done to protect the ally.
I just use a leather belt to loosen them if tight.
Sent from my SM-G965F using Tapatalk
Printable View
Simple green in sonic cleaner works for me.
As mentioned it needs to be neutralised once done to protect the ally.
I just use a leather belt to loosen them if tight.
Sent from my SM-G965F using Tapatalk
White lithium grease works on the threads. They actually work better with a little build up. They are modulated to add and remove baffles as you like and you can clean them but you don't need to. Gunworks and hardies are sealed and no one cleans them.
Sent from my SM-G930F using Tapatalk
The dishwashing liquid did nothing. Hot water and some slip 2000 was mint, carbon wiped off. That baffle is stuck though. Its to the point il fuck it if i try any harder :D
freeze it then in to hot water, the thermal change should crack the carbon in the threads enough to start to get carbon remover in there.
mine have been stuck a few times:oh noes:
crc brake cleaner
DPT sell a pair of purpose made suppressor clamps for $90.00 (available on website). Much better than struggling with hose clamps!
You can borrow mine.
Its in the freezer:D if it doesnt come off in the morning its staying put :DQuote:
Originally Posted by Pauli
Cheers for the offer man
Oh, and the dishwasher can do wonders as well.
You reckon Rushy knows how to drive one..... Guess he'll have to learn if the missus is off to the USA... Or does he have enough dishes to use 1/day until she gets home?Quote:
Originally Posted by Beaker
I soaked mine in hot water + dish liquid. Scrubbed with wire scrub thing. Worked well
I'm keen to hear how Rushy became a part of this conversation?
Hmmm ok must have been having a blonde moment.... Guess I meant GiboQuote:
Originally Posted by Ryan_Songhurst
Bit naughty I know, but on my 22 with the 3 sliding chambers and spring when I would clean it out sometimes the chambers would be stuck. First couple would come out with gentle levering but the last one was a dog to get out and all aluminium so didn't really want to wail on it. I would.... aim it into something soft like the ground and fire a shot through it. always came out and only a 22 so not as bad as a centerfire.
Hi all,
Anything water based is not recommended, (water can increases the risk of corrosion) soak the parts in wd40 and give them a good scrub.
We also sell spanners if you are finding them hard to get appart.
Darren
Alright one more go tomorrow with wd :D